Loading...
The King Forged Tec is Cobra's answer to a specific problem: you want a club that looks like a players iron at address but doesn't punish you like one. It's a forged, hollow-body iron with a thin face and tungsten packed into the toe. The 7-iron sits at 34 degrees, which is stronger than a true blade but nowhere near the jacked-up game-improvement territory where 7-irons hit 28 or 29 degrees.
So it lands in a useful middle. Better players who want a compact topline and a soft feel can play it. Mid-handicappers who are tired of getting eaten alive by muscle-backs can play it too. The hollow construction with foam inside the head does a lot of the heavy lifting, giving you ball speed off center hits without the tinny sound a lot of hollow irons have.
What you don't get is a cheat code. This is still a compact iron with a thin sole. Catch one heavy off a tight lie and you'll know. The Forged Tec rewards decent contact and gives you a bit of margin when you miss, and that's the honest pitch.
In short
The Cobra King Forged Tec (2023) is a players cavity that adds forgiveness without much extra size. The set runs 3-iron to PW with a 34° 7-iron. It carries a $999 MSRP.
Refresh due soon
Brands in this category update about every 2 years, and the King Forged Tec is 3 years old with no successor yet, so a new model could land any time. Grab it at clearance pricing now, or wait a few weeks to see what replaces it.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Modeled from the $999 original MSRP and a 3-year-old release (about 33% of MSRP retained used).
Used market value
$280 - $370
Private sale, fair to like-new
Trade-in value
$170 - $260
What a shop typically pays
Get an exact quote
Estimate only, from a depreciation model, not a live quote. Search “Cobra King Forged Tec” on the sites above for the real number, which varies with condition, shaft, and demand.
The King Forged Tec is the 2nd of 2 generations Cobra has released in this line, from the King Forged Tec (2022) to the King Forged Tec (2023). It followed the King Forged Tec (2022) and came in held the same price. It is the newest generation in the line.
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 21.0° | 24.0° | 27.0° | 30.0° | 34.0° | 38.0° | 43.0° | 47.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Club | Loft | Moderate swing~130y 7-iron | Average swing~145y 7-iron | Faster swing~159y 7-iron |
|---|---|---|---|---|
| 3-iron | 21° | 162 y | 181 y | 199 y |
| 4-iron | 24° | 154 y | 172 y | 189 y |
| 5-iron | 27° | 147 y | 164 y | 180 y |
| 6-iron | 30° | 139 y | 155 y | 170 y |
| 7-iron | 34° | 130 y | 145 y | 159 y |
| 8-iron | 38° | 121 y | 135 y | 148 y |
| 9-iron | 43° | 111 y | 124 y | 136 y |
| PW | 47° | 102 y | 114 y | 125 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
The body is forged from soft carbon steel, which is where the feel comes from. Inside, it's hollow, and Cobra fills that cavity with foam microspheres that damp the vibration you'd otherwise get from a hollow head. A tungsten weight in the toe pushes the center of gravity low and toward the heel-toe extremes, so the sweet spot covers more of the face than the slim shape suggests. The loft setup runs 34 degrees at the 7-iron down to 47 at the pitching wedge, with the long irons at 21, 24, and 27. Gaps stay consistent through the set, roughly three to four degrees, so your distance spacing holds up. The 3, 4, and 5-irons are genuinely playable here because the hollow body and tungsten make them easier to launch than a traditional long iron.
The Cobra King Forged Tec's 7-iron is lofted at 34° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 136-146 yards. The 5-iron (27°) to 7-iron gap of 7° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 47° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
The 7-iron is 34 degrees, which is on the stronger side but not extreme. Game-improvement irons often run 28 to 30 degrees at the 7, so the Forged Tec is more traditional than those. You'll get some added distance versus a blade, but your gapping stays sensible with the 47-degree pitching wedge.
It's a players cavity, which is the category in between. The head is compact with a thin topline like a players iron, but the hollow body, foam filling, and tungsten weighting add forgiveness closer to what you'd get from a game-improvement club. Think of it as a players iron with a safety net.
Better than most hollow irons. The foam microspheres inside the head cut down the hollow, clicky sound and vibration, so mishits feel more solid than they would in an empty-cavity design. You still lose some ball speed on bad strikes, but the feedback is soft rather than harsh.
If you're a consistent ball striker who wants maximum workability and feedback, blades give you more. The Forged Tec trades a little of that precision for real forgiveness and easier launch, especially in the long irons. Most golfers who aren't playing to a low single-digit handicap will score better with the Forged Tec.
Yes, relatively. The 3, 4, and 5-irons at 21, 24, and 27 degrees benefit most from the hollow construction and tungsten weighting, which lower the center of gravity and help the ball launch. They're much easier to get airborne than traditional forged long irons, though a hybrid may still be worth considering for the 3-iron slot.
No ratings yet. Sign in to rate this club.
Other players cavity iron models from different brands, closest to its model year.
Use as your baseline in the recommendation tool, or compare side-by-side with another set.