Loading...
The JPX 900 Tour is the iron Mizuno built for players who want a cavity back but refuse to look down at a chunky, offset-heavy club. It sits in the players cavity slot: forgiving enough to help on off-center strikes, compact enough that a good ball-striker won't feel like they're cheating. Brooks Koepka won his first U.S. Open with these in the bag, which tells you what kind of golfer Mizuno had in mind.
Like almost every Mizuno iron worth talking about, this one is Grain Flow Forged from 1025E Pure Select mild carbon steel. That's the soft, buttery feel Mizuno is famous for, and the JPX 900 Tour has it in spades. The 7-iron sits at a traditional 35 degrees, so you're getting real, honest lofts here, not the jacked-up numbers some game-improvement irons hide behind to fake distance.
This is a shot-maker's cavity back. It has a thin topline, minimal offset, and a compact blade length that shrinks the closer you get to the short irons. If you play a mid to low handicap and want workability without going full muscle-back, this is the iron that fits between forgiveness and feel.
In short
The Mizuno JPX 900 Tour (2016) is a players cavity that adds forgiveness without much extra size. The set runs 3-iron to PW with a 35° 7-iron. It carries a $1,049 MSRP.
Last-gen value buy
The newer JPX 921 Tour (2020) is already out, so the JPX 900 Tour now sells at closeout pricing. If you do not need the very latest tech, this is the smart-money pick.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Modeled from the $1,049 original MSRP and a 10-year-old release (about 12% of MSRP retained used).
Used market value
$105 - $140
Private sale, fair to like-new
Trade-in value
$65 - $100
What a shop typically pays
Get an exact quote
Estimate only, from a depreciation model, not a live quote. Search “Mizuno JPX 900 Tour” on the sites above for the real number, which varies with condition, shaft, and demand.
The JPX 900 Tour is the 1st of 3 generations Mizuno has released in this line, from the JPX 900 Tour (2016) to the JPX 921 Tour (2020). It is where the line started. The JPX 919 Tour (2018) replaced it.
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 21.0° | 24.0° | 27.0° | 31.0° | 35.0° | 39.0° | 43.0° | 47.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Club | Loft | Moderate swing~128y 7-iron | Average swing~143y 7-iron | Faster swing~157y 7-iron |
|---|---|---|---|---|
| 3-iron | 21° | 159 y | 178 y | 196 y |
| 4-iron | 24° | 151 y | 169 y | 186 y |
| 5-iron | 27° | 144 y | 161 y | 177 y |
| 6-iron | 31° | 136 y | 152 y | 167 y |
| 7-iron | 35° | 128 y | 143 y | 157 y |
| 8-iron | 39° | 119 y | 133 y | 146 y |
| 9-iron | 43° | 109 y | 122 y | 134 y |
| PW | 47° | 100 y | 112 y | 123 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
Mizuno kept the head compact and clean. The topline is thin, the offset is small, and the sole is narrower than what you'll find on the JPX 900 Forged or Hot Metal, so it sits behind the ball looking like a players club rather than a shovel. The cavity is there, but it's understated, with weight moved to the perimeter just enough to steady the strike without turning the iron into a distance machine. The lofts run progressively through the set, from 21 degrees in the 3-iron down to 47 in the pitching wedge, with each gap holding steady around 4 degrees. Grain Flow Forging in HD (High Density) means the grain of the steel runs continuously through the head, which is where that soft, solid feel at impact comes from. You feel exactly where you hit it, which is the whole point of an iron like this.
The Mizuno JPX 900 Tour's 7-iron is lofted at 35° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 133-143 yards. The 5-iron (27°) to 7-iron gap of 8° is spread across a wide range, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 47° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
It's a players cavity back, not a blade. There's a small cavity behind the face that adds a bit of forgiveness, but the head is compact with a thin topline and minimal offset, so it looks and plays much closer to a blade than a game-improvement iron. If you want the pure muscle-back version, that's the JPX 900 Forged or Mizuno's MP line.
Traditional. The 7-iron is 35 degrees and the pitching wedge is 47, which are honest, standard players lofts. Mizuno didn't crank these to fake extra distance, so your gapping stays predictable and your wedges still fit cleanly under the set.
It fits best for low to mid handicappers, roughly single digits up to the mid teens. You need to make consistent center contact to get the most out of it. Higher handicappers who struggle with strike will find more help in the JPX 900 Hot Metal or Forged, which have bigger heads and stronger lofts.
It's Grain Flow Forged HD from 1025E Pure Select mild carbon steel. Forging from a single billet keeps the grain running continuously through the head, and the soft carbon steel is what gives you that dense, buttery feel at impact Mizuno is known for. On a flush strike it feels solid, and on a miss you feel exactly where you caught it.
Yes. Brooks Koepka won the 2017 U.S. Open with JPX 900 Tour irons in the bag, and the model saw plenty of tour use during its run. It was designed as a genuine competition iron for players who want cavity-back stability in a compact, workable head.
No ratings yet. Sign in to rate this club.
Other players cavity iron models from different brands, closest to its model year.
Use as your baseline in the recommendation tool, or compare side-by-side with another set.