跳到主要内容

Ben Hogan

Ben Hogan Apex Plus 铁杆

刀背2000

The Apex Plus came out of Fort Worth at a strange moment for the Ben Hogan Company. By 2000, Spalding owned the brand and oversized cast irons ruled the market, but Hogan kept doing what Hogan did: forging carbon steel irons for people who cared more about feel than forgiveness. The Apex Plus was the company's small concession to the era. It kept the forged blade DNA of the standard Apex but added a touch more heft low in the head and a slightly friendlier profile at address.

Don't read too much into the word Plus, though. This is still a blade by any modern standard. The topline is thin, the offset is minimal, and a shot struck off the toe will tell you about it immediately. What you get in exchange is the thing Hogan loyalists still hunt these irons down for on eBay two decades later, a soft, dense feel at impact that very few modern irons match.

These usually came fitted with the Apex shaft, Hogan's own steel design with its odd numbered flex system. That shaft has a smooth, almost buttery load to it, and it's a big part of why a well-struck Apex Plus long iron feels the way it does.

简而言之

Ben Hogan Apex Plus (2000) 是一款紧凑的刀背铁杆,适合追求手感和控球的高水平击球手。套杆为3号铁至SW,7号铁杆面倾角为 34°。2000年发布。

Ben Hogan Apex Plus 铁杆: 关键参数

类别
刀背
适合差点范围
0 至 5
套装组成
3号铁至SW
7号铁杆面倾角
34 度
杆面倾角范围
20 至 56 度
型号年份
2000

购买渠道

点击将打开各零售商的搜索页面。价格与库存以零售商为准。

现在买还是再等等?

买或等

即将换代

这一类别的品牌大约每 2 年更新一次,Apex Plus 已经上市 26 年,还没有后继型号,所以新款随时可能发布。可以现在以清仓价入手,也可以再等几周看看接替它的是什么。

基于发布时间和该系列通常的换代周期,并非实时报价。

杆面倾角参数

Ben Hogan Apex Plus 的7号铁杆面倾角为 34 度。套杆为3号铁至SW。适合差点 0 至 5 的球手。

Ben Hogan Apex Plus (2000) 杆面倾角表
球杆杆面倾角
3i20°
4i23°
5i26°
6i30°
7i34°
8i38°
9i42°
PW46°
AW50°
SW56°

数据涵盖 3i 至 SW (共 10 支)。

Apex Plus 各号杆面倾角

  • Ben Hogan Apex Plus 3号铁杆面倾角: 20 度
  • Ben Hogan Apex Plus 4号铁杆面倾角: 23 度
  • Ben Hogan Apex Plus 5号铁杆面倾角: 26 度
  • Ben Hogan Apex Plus 6号铁杆面倾角: 30 度
  • Ben Hogan Apex Plus 7号铁杆面倾角: 34 度
  • Ben Hogan Apex Plus 8号铁杆面倾角: 38 度
  • Ben Hogan Apex Plus 9号铁杆面倾角: 42 度
  • Ben Hogan Apex Plus 劈起杆杆面倾角: 46 度
  • Ben Hogan Apex Plus 间隙挖起杆杆面倾角: 50 度
  • Ben Hogan Apex Plus 沙坑挖起杆杆面倾角: 56 度

原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。

已与制造商规格页存档核对的杆面倾角 (2026年11月15日)

全部 Ben Hogan 铁杆杆面倾角

Ben Hogan Apex Plus: 预计飞行距离

按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。

球杆杆面倾角中等挥速7号铁约 130y平均挥速7号铁约 145y较快挥速7号铁约 159y
3号铁20°162 y181 y199 y
4号铁23°154 y172 y189 y
5号铁26°147 y164 y180 y
6号铁30°139 y155 y170 y
7号铁34°130 y145 y159 y
8号铁38°121 y135 y148 y
9号铁42°111 y124 y136 y
PW46°102 y114 y125 y

飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。

关于 Ben Hogan Apex Plus

Hogan forged the Apex Plus from carbon steel at the Fort Worth plant, and the finish work from that era holds up. Compared to the straight Apex blade, the Plus carries a marginally longer blade length and moves a little mass toward the sole, which nudges the sweet spot down to where most golfers actually strike it. Call it a muscleback with sympathy. The sole is fairly narrow with the traditional Hogan camber, so it works cleanly through firm turf but offers no bounce-related rescue from fat shots. Lofts are traditional for the period, which means noticeably weaker than anything sold today. A 2000-era Apex Plus 7-iron flies more like a modern 8 or 9-iron. That's not a flaw. Paired with the higher spin of a forged blade, it produces the kind of steep-landing, controllable ball flight that made these a favorite among better players.

杆面倾角分析

Ben Hogan Apex Plus 的7号铁杆面倾角为 34°,属于传统倾角,符合经典铁杆倾角标准。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 136 至 146 码。5号铁 (26°) 与7号铁之间相差 8°,间隔较大,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 46°,属于传统倾角,自然搭配标准的 52° 间隙挖起杆。

Ben Hogan Apex Plus 适合哪些球手?

  • ✓Single-digit handicappers who want classic Hogan feel with slightly more margin than the standard Apex blade.
  • ✓Collectors and traditionalists drawn to the last generation of irons forged at the Fort Worth factory.
  • ✓Skilled ball strikers building a vintage or throwback bag who still plan to actually play the clubs, not just display them.

相关阅读

常见问题

Are the Ben Hogan Apex Plus irons forgiving?

Not by modern standards. The Plus designation means a little extra sole weight and a slightly larger head than the standard Apex blade, which helps marginally on thin strikes. Miss toward the toe or heel and you'll lose real distance. If you're above roughly a 10 handicap, a modern players cavity back will treat you better.

What do the Apex shaft numbers mean, like Apex 3 or Apex 4?

Hogan used its own flex system on the Apex steel shafts. Apex 3 plays close to a regular flex, Apex 4 is roughly stiff, and Apex 5 is extra stiff. They run slightly softer than modern shafts with the same label, so an Apex 4 feels a touch smoother than a current stiff shaft.

How do the 2000 Apex Plus lofts compare to modern irons?

They're about one to one and a half clubs weaker. That era's 7-iron loft sits where many current 8-irons or even 9-irons do. Judge them by trajectory and gapping rather than the number on the sole, and don't be discouraged if they fly shorter than your current set.

What's the difference between the Apex Plus and the regular Apex blade?

The standard Apex is a pure muscleback. The Plus has a slightly longer blade, a lower center of gravity, and a bit more mass behind the impact area, so it launches a little easier and stings a little less on mishits. Feel between the two is nearly identical since both are forged carbon steel.

Are Apex Plus irons from 2000 still worth buying today?

For the right golfer, yes. Clean sets are affordable on the used market and the forging quality is excellent. Check the grooves and sole wear, since many sets saw heavy play, and budget for fresh grips and possibly a loft and lie check. As a first set for a beginner, though, they're a poor fit.

Ben Hogan Apex Plus 铁杆适合高差点球手吗?

不太适合。Ben Hogan Apex Plus 是面向击球稳定球手的刀背设计。这一类别通常适合差点 0 至 5 的球手。高差点球手会觉得进阶型款式更宽容。

Ben Hogan Apex Plus 的替代选择

其他品牌的刀背 铁杆型号,按发布年份最接近排列。

更多 Ben Hogan 铁杆

看看这套铁杆是否适合你

在推荐工具中把它设为基准,或与另一套铁杆并排比较。