Ben Hogan's M50-01 lands in the players distance slot for 2025, and that tells you most of what you need to know about who built it and why. Hogan sells direct to you, no pro shop middleman, which is how a forged head like this ends up costing what a cast game-improvement iron does everywhere else. The company has spent the last decade rebuilding around one idea: give competent players a forged iron that flies far without looking like a shovel.
Players distance is a specific promise. It means more ball speed and a stronger launch than a traditional muscleback, packed into a head that still sits behind the ball looking like something a single-digit handicap would game. The M50-01 is aimed squarely at the golfer who used to play a players iron, watched their swing speed dip a few miles per hour, and wants those long irons back in the air without switching to a bulky, offset-heavy design.
This is not a blade and it does not pretend to be. It is also not going to bail out a slice the way a super-game-improvement iron will. It sits in the middle, and if that middle is where your game actually lives, it's worth a hard look, especially at Hogan's direct pricing.
简而言之
Ben Hogan M50-01 (2025) 是一款兼顾球速与简洁外形的球员远距离铁杆。套杆为4号铁至AW,7号铁杆面倾角为 31°。2025年发布。建议零售价 (MSRP) 为 $900。
Ben Hogan M50-01 铁杆: 关键参数
- 类别
- 选手远距
- 适合差点范围
- 8 至 18
- 套装组成
- 4号铁至AW
- 7号铁杆面倾角
- 31 度
- 杆面倾角范围
- 21 至 48 度
- 型号年份
- 2025
- MSRP
- $900
购买渠道
点击将打开各零售商的搜索页面。价格与库存以零售商为准。
卖出或以旧换新
预估价根据 $900 的原始建议零售价和发布 1 年的发布推算(二手价约保留原价的 55%)。
二手市场价
$420 - $555
个人交易,良好至近全新
以旧换新价
$250 - $390
球具店通常的收购价
获取精确报价
仅为折旧模型推算,并非实时报价。实际金额会随成色、杆身和需求变化,请在上述网站搜索“Ben Hogan M50-01”查看真实价格。
杆面倾角参数
Ben Hogan M50-01 的7号铁杆面倾角为 31 度。套杆为4号铁至AW。适合差点 8 至 18 的球手。
| 球杆 | 杆面倾角 |
|---|---|
| 4i | 21° |
| 5i | 24° |
| 6i | 27° |
| 7i | 31° |
| 8i | 35° |
| 9i | 40° |
| PW | 44° |
| AW | 48° |
数据涵盖 4i 至 AW (共 8 支)。
M50-01 各号杆面倾角
- Ben Hogan M50-01 4号铁杆面倾角: 21 度
- Ben Hogan M50-01 5号铁杆面倾角: 24 度
- Ben Hogan M50-01 6号铁杆面倾角: 27 度
- Ben Hogan M50-01 7号铁杆面倾角: 31 度
- Ben Hogan M50-01 8号铁杆面倾角: 35 度
- Ben Hogan M50-01 9号铁杆面倾角: 40 度
- Ben Hogan M50-01 劈起杆杆面倾角: 44 度
- Ben Hogan M50-01 间隙挖起杆杆面倾角: 48 度
原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。
已与制造商规格页核对的杆面倾角 (2026年11月15日)
Ben Hogan M50-01: 预计飞行距离
按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。
| 球杆 | 杆面倾角 | 中等挥速7号铁约 137y | 平均挥速7号铁约 152y | 较快挥速7号铁约 166y |
|---|---|---|---|---|
| 4号铁 | 21° | 163 y | 181 y | 198 y |
| 5号铁 | 24° | 155 y | 172 y | 188 y |
| 6号铁 | 27° | 147 y | 163 y | 178 y |
| 7号铁 | 31° | 137 y | 152 y | 166 y |
| 8号铁 | 35° | 128 y | 142 y | 155 y |
| 9号铁 | 40° | 117 y | 130 y | 142 y |
| PW | 44° | 108 y | 120 y | 131 y |
飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。
关于 Ben Hogan M50-01
The players distance formula relies on a thin, fast face and internal weighting to add speed while keeping the top line and offset in check. That's the balance the M50-01 is chasing: enough face flex to bump the long and mid irons up a club, without turning the profile into something that offends the eye at address. Expect a compact-to-mid footprint, a top line thinner than a game-improvement iron, and offset that's present but restrained. Ordering direct from Hogan is part of the design story, not a footnote. You spec loft, lie, and length at build time at no upcharge, so the iron that shows up is fit to you rather than pulled off a rack. Hogan builds these in Fort Worth, and the brand's whole pitch is that a forged, custom-fit head shouldn't require a premium markup. If you already know your gapping and lie angle, that ordering process is where this club earns a lot of its value.
杆面倾角分析
Ben Hogan M50-01 的7号铁杆面倾角为 31°,接近传统,与经典的 32 至 34° 基准相近。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 147 至 157 码。5号铁 (24°) 与7号铁之间相差 7°,间隔合理,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 44°,属于常规范围,可以顺畅搭配 50 至 52° 的间隙挖起杆。
Ben Hogan M50-01 适合哪些球手?
- ✓You played a players iron for years and want your long irons flying higher again as swing speed drops.
- ✓You want forged feel and a clean look but need more carry than a muscleback delivers.
- ✓You are comfortable buying direct and getting fit for loft, lie, and length instead of shopping a retail rack.
- ✓Your misses are consistent enough that you don't need heavy offset or a wide sole bailing you out.
- ✓You care about gapping and want a stronger-lofted set that still holds greens with the shorter irons.
相关阅读
常见问题
Is the Ben Hogan M50-01 a forged iron?
Yes. Hogan builds its irons forged and sells them direct to consumers from Fort Worth, which is how the M50-01 stays priced against cast irons from the big retail brands. The forging is a big part of why this sits in the players distance category rather than the game-improvement rack.
Who should play the M50-01 instead of a Hogan players or blade model?
Choose the M50-01 if you want more ball speed and a higher long-iron flight than a muscleback gives you, but still want a clean look and modest offset. If you strike it consistently and prefer maximum feel and workability over distance, a true players iron or blade will suit you better.
Can I customize the loft and lie when I order?
That's the core of Hogan's direct model. You spec loft, lie, length, shaft, and grip at build time, usually without the upcharge you'd pay elsewhere. If you already know your fitting numbers, order to them rather than accepting a standard build.
Will the M50-01 help if I fight a slice?
Not the way a super-game-improvement iron will. Players distance heads keep offset and sole width in check, so they don't fight a big miss for you. If curve control is your main problem, look at a more forgiving, higher-offset design instead.
How does buying direct from Ben Hogan work for warranty and fitting?
You buy through Hogan directly rather than a retailer, so fitting is handled through their spec process at checkout and support comes straight from the company. The tradeoff for the lower price is that you won't hit it in a shop first, so knowing your numbers or using their fitting guidance matters more than usual.
Ben Hogan M50-01 铁杆适合高差点球手吗?
可以用,但有前提。Ben Hogan M50-01 是选手远距设计。这一类别通常适合差点 8 至 18 的球手。差点 20 以上的球手用进阶型款式会得到更多帮助。
Ben Hogan M50-01 的替代选择
其他品牌的选手远距 铁杆型号,按发布年份最接近排列。