Ben Hogan doesn't operate like the big equipment companies, and the PTx Tour is a good example of why that matters. Sold direct to consumer with no retail markup, this 2023 players cavity gives you a forged carbon steel iron at a price that undercuts comparable models from Titleist or Mizuno by a wide margin. The trade-off is you probably won't hit one at your local shop first. For a lot of golfers, the savings make that gamble worth taking.
The club itself is a compact players cavity in the classic sense. Thin topline, minimal offset, a shallow cavity that adds just enough perimeter weighting to take the edge off slight mishits without inflating the head. It sits in that narrow band between a true blade and a modern players distance iron, which is exactly where better ball strikers tend to shop. This is a forgiving iron by blade standards, but it won't pretend to be something it's not. Catch one thin and you'll know.
Hogan's V-Sole is the quiet advantage here. The higher-bounce leading edge and lower-bounce trailing section let the club enter and exit the turf cleanly across different conditions, so diggers and pickers can both play it without fighting the sole.
简而言之
Ben Hogan PTx Tour (2023) 是一款在不明显加大尺寸的前提下增加容错性的球员凹背铁杆。套杆为4号铁至PW,7号铁杆面倾角为 33.5°。2023年发布。
Ben Hogan PTx Tour 铁杆: 关键参数
- 类别
- 选手腔背
- 适合差点范围
- 0 至 12
- 套装组成
- 4号铁至PW
- 7号铁杆面倾角
- 33.5 度
- 杆面倾角范围
- 21.5 至 45.5 度
- 型号年份
- 2023
购买渠道
点击将打开各零售商的搜索页面。价格与库存以零售商为准。
杆面倾角参数
Ben Hogan PTx Tour 的7号铁杆面倾角为 33.5 度。套杆为4号铁至PW。适合差点 0 至 12 的球手。
| 球杆 | 杆面倾角 |
|---|---|
| 4i | 21.5° |
| 5i | 25.5° |
| 6i | 29.5° |
| 7i | 33.5° |
| 8i | 37.5° |
| 9i | 41.5° |
| PW | 45.5° |
数据涵盖 4i 至 PW (共 7 支)。如果 Ben Hogan 为这套杆提供其他球杆 (例如间隙挖起杆),目前还不在我们的数据中。
PTx Tour 各号杆面倾角
- Ben Hogan PTx Tour 4号铁杆面倾角: 21.5 度
- Ben Hogan PTx Tour 5号铁杆面倾角: 25.5 度
- Ben Hogan PTx Tour 6号铁杆面倾角: 29.5 度
- Ben Hogan PTx Tour 7号铁杆面倾角: 33.5 度
- Ben Hogan PTx Tour 8号铁杆面倾角: 37.5 度
- Ben Hogan PTx Tour 9号铁杆面倾角: 41.5 度
- Ben Hogan PTx Tour 劈起杆杆面倾角: 45.5 度
原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。
已与制造商规格页核对的杆面倾角 (2026年11月15日)
Ben Hogan PTx Tour: 预计飞行距离
按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。
| 球杆 | 杆面倾角 | 中等挥速7号铁约 131y | 平均挥速7号铁约 146y | 较快挥速7号铁约 160y |
|---|---|---|---|---|
| 4号铁 | 21.5° | 155 y | 173 y | 190 y |
| 5号铁 | 25.5° | 148 y | 165 y | 181 y |
| 6号铁 | 29.5° | 140 y | 156 y | 171 y |
| 7号铁 | 33.5° | 131 y | 146 y | 160 y |
| 8号铁 | 37.5° | 122 y | 136 y | 149 y |
| 9号铁 | 41.5° | 112 y | 125 y | 137 y |
| PW | 45.5° | 103 y | 115 y | 126 y |
飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。
关于 Ben Hogan PTx Tour
Construction is forged carbon steel, which is where the PTx Tour gets its soft, dense feel at impact. The cavity is shallow and the badge-free back keeps the look clean at address and in the bag. Weight is concentrated behind the impact area rather than pushed to the extreme perimeter, so feedback stays honest. You get a clear read on where you struck it, which is the point of an iron like this. Shaping follows the traditional Hogan template. Shorter blade length than a game improvement iron, a topline that reads thin without disappearing, and enough camber in that V-Sole grind to keep turf interaction predictable from tight lies or fluffier fairways. Nothing about the design chases distance. Lofts stay traditional, so gapping is built around consistency and trajectory control instead of scorecard-flattering carry numbers.
杆面倾角分析
Ben Hogan PTx Tour 的7号铁杆面倾角为 33.5°,属于传统倾角,符合经典铁杆倾角标准。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 138 至 148 码。5号铁 (25.5°) 与7号铁之间相差 8°,间隔较大,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 45.5°,属于传统倾角,自然搭配标准的 52° 间隙挖起杆。
Ben Hogan PTx Tour 适合哪些球手?
- ✓Single-digit and low-teens handicaps who strike it well enough to want feedback but appreciate a small margin for error over a pure blade.
- ✓Players drawn to a traditional look at address, with a thin topline, minimal offset, and no visible technology.
- ✓Anyone who wants a forged players iron without paying the premium that the major brands charge at retail.
- ✓Golfers who fight turf interaction, since the V-Sole grind handles steep and shallow attack angles better than most flat-soled players irons.
相关阅读
常见问题
Is the Ben Hogan PTx Tour forgiving enough for a mid handicapper?
It depends on how you miss. The cavity back gives it more stability than a blade, so a 10 to 15 handicap with decent contact can play it. If your misses are frequently off the toe or thin, a larger game improvement head will cost you fewer shots. This iron rewards center-face contact and only softens the penalty on near misses.
Is the PTx Tour forged or cast?
Forged. Ben Hogan uses forged carbon steel for the PTx Tour, which is a big part of the soft feel and the price appeal, since forged irons from major brands typically cost significantly more at retail.
How does the PTx Tour compare to the Ben Hogan Icon?
The Icon is Hogan's muscle-back blade, aimed at players who want maximum workability and feedback with no forgiveness features. The PTx Tour adds a shallow cavity and perimeter weighting, so it flies a bit straighter on mishits while keeping a similar compact profile. Most golfers considering the Icon would score better with the PTx Tour.
Can you get the PTx Tour custom fit if Ben Hogan only sells online?
Ben Hogan sells direct through its website with options for shaft, flex, lie angle, and grip at ordering. You won't get an in-person fitting from the company, so the practical route is to get fit independently or use your current specs, then order to match. Hogan has also offered demo programs so you can try before committing to a full set.
What handicap range is the PTx Tour designed for?
Roughly 0 to 15, with the sweet spot around 5 to 12. Better players who want a little insurance over a blade fit it well. Beyond the mid teens, the compact head and traditional lofts start working against you unless your ball striking is unusually solid for your handicap.
Ben Hogan PTx Tour 铁杆适合高差点球手吗?
不太适合。Ben Hogan PTx Tour 是面向击球稳定球手的选手腔背设计。这一类别通常适合差点 0 至 12 的球手。高差点球手会觉得进阶型款式更宽容。
Ben Hogan PTx Tour 的替代选择
其他品牌的选手腔背 铁杆型号,按发布年份最接近排列。