The Miura MC-502 is a players cavity iron for golfers who want a little help without giving up the look and feel of a blade. MC stands for muscle cavity, and that's exactly what you get here: a compact head with a small pocket carved out behind the hitting area to move a bit of weight to the perimeter. It's forged from soft carbon steel at Miura's shop in Himeji, Japan, which is the whole reason people chase this brand in the first place.
What sets the MC-502 apart from Miura's straight blades is that it forgives the occasional miss off the toe or low on the face without turning into a game-improvement club. The topline is thin, the offset is minimal, and the sole is narrow. Address it and it looks like a players iron should. The cavity is doing quiet work behind the scenes, not shouting about it.
Lofts are on the moderately traditional side. The 7-iron sits at 33 degrees, which is stronger than an old-school blade but nowhere near the jacked-up numbers you see on distance irons pushing 28 or 29. That means your gapping stays sane and your wedges still fit, and the ball flies at a height a good player expects rather than a flat, hot launch you have to fight.
简而言之
The Miura MC-502 (2023) is a players cavity that adds forgiveness without much extra size. The set runs 3-iron to PW with a 33° 7-iron.
Miura MC-502 铁杆: 关键参数
- 类别
- 选手腔背
- 套装组成
- 3-iron to PW
- 7-iron loft
- 33 degrees
- 杆面倾角范围
- 21 to 46 degrees
- 型号年份
- 2023
现在买还是再等等？
买或等Refresh due soon
Brands in this category update about every 2 years, and the MC-502 is 3 years old with no successor yet, so a new model could land any time. Grab it at clearance pricing now, or wait a few weeks to see what replaces it.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Miura MC-502: the iron lineage
The MC-502 is the 2nd of 2 generations Miura has released in this line, from the MC-501 (2018) to the MC-502 (2023). It followed the MC-501 (2018). It is the newest generation in the line.
- 2023MC-502You are here
杆面倾角参数
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 21.0° | 23.0° | 26.0° | 29.0° | 33.0° | 37.0° | 41.0° | 46.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Miura MC-502: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| 球杆 | 杆面倾角 | Moderate swing~132y 7-iron | Average swing~147y 7-iron | Faster swing~161y 7-iron |
|---|---|---|---|---|
| 3-iron | 21° | 165 y | 184 y | 202 y |
| 4-iron | 23° | 157 y | 175 y | 192 y |
| 5-iron | 26° | 150 y | 167 y | 183 y |
| 6-iron | 29° | 142 y | 158 y | 173 y |
| 7-iron | 33° | 132 y | 147 y | 161 y |
| 8-iron | 37° | 123 y | 137 y | 150 y |
| 9-iron | 41° | 113 y | 126 y | 138 y |
| PW | 46° | 104 y | 116 y | 127 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
About the Miura MC-502
The head is compact from every angle. Short blade length, thin topline, and a sole that's narrow enough to work out of tight lies but still slides through turf better than a pure blade. The muscle cavity design keeps mass low and behind the center of the face, so strikes stay stable and the sweet spot feels a touch more generous than the small footprint suggests. Soft carbon steel forging gives the MC-502 the dense, buttery impact feel Miura is known for. You feel exactly where you hit it, which is the point of an iron in this category. The finish is clean and understated, and the minimal offset means the leading edge sits close to square, the way better players tend to prefer.
杆面倾角分析
The Miura MC-502's 7-iron is lofted at 33° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 140-150 yards. The 5-iron (26°) to 7-iron gap of 7° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 46° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
Who Should Play the Miura MC-502?
- ✓Single-digit and low-teen handicaps who strike it well but want slightly more room for error than a straight blade gives
- ✓Players moving down from a game-improvement iron who are ready for a smaller head and thinner topline
- ✓Golfers who prioritize feel and feedback and are willing to pay for Japanese forging quality
- ✓Anyone who wants traditional-ish lofts and predictable gapping rather than jacked-up distance numbers
- ✓Ball-strikers who like to shape shots and want an iron that reports honestly on where they caught it
常见问题
Is the Miura MC-502 a blade or a cavity back?
It's a players cavity, which sits between the two. MC stands for muscle cavity, so there's a small pocket behind the face for a bit of forgiveness, but the head is compact with a thin topline and minimal offset like a blade. It looks and feels like a players iron, not a game-improvement club.
How forgiving is the MC-502 compared to a Miura blade?
More forgiving, but only by a margin. The muscle cavity moves some weight to the perimeter, so slightly off-center strikes hold their line and lose a little less distance than they would off a pure blade. If you need real help on mishits, this still isn't the iron for you. It rewards good contact.
What are the lofts on the MC-502?
They run from 21 degrees in the 3-iron to 46 degrees in the pitching wedge, with the 7-iron at 33 degrees. That's moderately traditional, stronger than a classic blade but well short of distance-iron territory, so your gapping and wedge setup stay clean.
Why is the MC-502 so expensive?
You're paying for Miura's forging. The heads are forged from soft carbon steel in Himeji, Japan, with a level of quality control that shows up in the feel at impact. It's a boutique product, not a mass-market iron, and the price reflects the craftsmanship rather than any high-tech gimmick.
Who should choose the MC-502 over a straight players blade?
Golfers who strike it well but want a small safety net on toe and thin strikes without moving to a bigger head. If you love the look of a blade at address but occasionally get punished more than you'd like, the muscle cavity gives you a touch of stability while keeping the compact profile.
评分与评价
No ratings yet. Sign in to rate this club.
Alternatives to the Miura MC-502
Other 选手腔背 iron models from different brands, closest to its model year.
More Miura 铁杆
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.