Nickent is one of those brands that flared bright and burned out fast. In the mid-2000s they were the darlings of the hybrid world, with the 3DX line showing up in tour bags and winning awards, and the company used that momentum to push into every other category, putters included. The ARC Blade landed in 2008, right near the end of that run, before the company folded not long after.
That history matters if you're looking at one today, because this putter only exists on the used market, and usually for pocket change. There's no fitting cart, no demo day, no warranty. What you get is a straightforward heel-toe blade from a company that was genuinely trying to compete with the big names on design rather than price alone.
Is it worth hunting down? Probably not if you're expecting a hidden gem that outperforms a Newport. But if you find one cheap and you like a traditional blade shape, it putts like plenty of putters that cost ten times as much. A blade is a blade. What matters is whether the look and the balance suit your stroke.
简而言之
Nickent ARC Blade (2008) 是一款紧凑的刀背铁杆,适合追求手感和控球的高水平击球手。套杆为3号铁至SW,7号铁杆面倾角为 35°。2008年发布。
Nickent ARC Blade 铁杆: 关键参数
- 类别
- 刀背
- 适合差点范围
- 0 至 5
- 套装组成
- 3号铁至SW
- 7号铁杆面倾角
- 35 度
- 杆面倾角范围
- 21 至 56 度
- 型号年份
- 2008
购买渠道
点击将打开各零售商的搜索页面。价格与库存以零售商为准。
杆面倾角参数
Nickent ARC Blade 的7号铁杆面倾角为 35 度。套杆为3号铁至SW。适合差点 0 至 5 的球手。
| 球杆 | 杆面倾角 |
|---|---|
| 3i | 21° |
| 4i | 24° |
| 5i | 27° |
| 6i | 31° |
| 7i | 35° |
| 8i | 39° |
| 9i | 43° |
| PW | 47° |
| AW | 51° |
| SW | 56° |
数据涵盖 3i 至 SW (共 10 支)。
ARC Blade 各号杆面倾角
- Nickent ARC Blade 3号铁杆面倾角: 21 度
- Nickent ARC Blade 4号铁杆面倾角: 24 度
- Nickent ARC Blade 5号铁杆面倾角: 27 度
- Nickent ARC Blade 6号铁杆面倾角: 31 度
- Nickent ARC Blade 7号铁杆面倾角: 35 度
- Nickent ARC Blade 8号铁杆面倾角: 39 度
- Nickent ARC Blade 9号铁杆面倾角: 43 度
- Nickent ARC Blade 劈起杆杆面倾角: 47 度
- Nickent ARC Blade 间隙挖起杆杆面倾角: 51 度
- Nickent ARC Blade 沙坑挖起杆杆面倾角: 56 度
原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。
已与制造商规格页存档核对的杆面倾角 (2026年11月15日)
Nickent ARC Blade: 预计飞行距离
按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。
| 球杆 | 杆面倾角 | 中等挥速7号铁约 128y | 平均挥速7号铁约 143y | 较快挥速7号铁约 157y |
|---|---|---|---|---|
| 3号铁 | 21° | 159 y | 178 y | 196 y |
| 4号铁 | 24° | 151 y | 169 y | 186 y |
| 5号铁 | 27° | 144 y | 161 y | 177 y |
| 6号铁 | 31° | 136 y | 152 y | 167 y |
| 7号铁 | 35° | 128 y | 143 y | 157 y |
| 8号铁 | 39° | 119 y | 133 y | 146 y |
| 9号铁 | 43° | 109 y | 122 y | 134 y |
| PW | 47° | 100 y | 112 y | 123 y |
飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。
关于 Nickent ARC Blade
The ARC Blade follows the classic heel-toe layout that Ping made famous decades earlier, with weight pushed to the ends of the head to keep the face stable when you miss the sweet spot. Nickent didn't reinvent anything here, and that's fine. The shape is clean at address, the topline is simple to align, and there's nothing gimmicky fighting for your attention over the ball. Compared to face-balanced mallets from the same era, this head has noticeable toe hang, which suits a stroke that arcs open and closed rather than one that goes straight back and straight through. The name isn't an accident. If you cut across your putts or take the putter dead straight, a mallet will treat you better.
杆面倾角分析
Nickent ARC Blade 的7号铁杆面倾角为 35°,属于传统倾角,符合经典铁杆倾角标准。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 133 至 143 码。5号铁 (27°) 与7号铁之间相差 8°,间隔较大,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 47°,属于传统倾角,自然搭配标准的 52° 间隙挖起杆。
Nickent ARC Blade 适合哪些球手?
- ✓Players with an arcing putting stroke who want the toe hang of a traditional blade rather than a face-balanced mallet.
- ✓Bargain hunters comfortable buying used, since this putter is only available secondhand and typically sells for very little.
- ✓Anyone who wants a clean, simple look at address without alignment gadgets or oversized geometry.
- ✓Collectors of late-2000s gear from brands that didn't survive, because Nickent's short run makes its clubs a bit of a curiosity.
相关阅读
常见问题
Is the Nickent ARC Blade a good putter in 2026?
It holds up fine as a basic heel-toe blade. Putter technology has moved toward better face milling, adjustable weighting, and modern alignment aids, but none of that changes the fundamentals of a blade this simple. If the head shape and balance fit your stroke, it will roll the ball as well as your stroke allows. Just inspect the face and grip carefully on any used example.
What happened to Nickent Golf?
Nickent grew quickly in the mid-2000s on the strength of its 3DX hybrids, then ran into financial trouble and effectively shut down around 2009 to 2010. The brand name changed hands afterward, but the original company that made the ARC Blade is gone. That means no manufacturer support, so buy accordingly.
What kind of stroke suits the ARC Blade?
A stroke with some arc to it. The blade shape carries toe hang, meaning the toe points toward the ground when you balance the shaft on your finger, and that helps the face rotate naturally open and closed through the stroke. If your stroke is straight back and straight through, a face-balanced mallet is usually the better match.
How much should I pay for a used Nickent ARC Blade?
Very little. Putters from defunct brands without a cult following tend to sit at the bottom of the used market, so expect to pay somewhere in the range of a couple of sleeves of premium golf balls. If a listing is priced like a used Scotty Cameron, walk away, because there's no collector premium that justifies it.
Can I get the ARC Blade regripped or bent to a different loft and lie?
Yes. Any competent club builder can regrip it, and a putter fitter with a bending machine can tweak loft and lie a degree or two in either direction. Since replacement parts from Nickent don't exist, aftermarket grips and standard shop work are the only route, but nothing about this putter requires anything exotic.
Nickent ARC Blade 铁杆适合高差点球手吗?
不太适合。Nickent ARC Blade 是面向击球稳定球手的刀背设计。这一类别通常适合差点 0 至 5 的球手。高差点球手会觉得进阶型款式更宽容。
Nickent ARC Blade 的替代选择
其他品牌的刀背 铁杆型号,按发布年份最接近排列。