Scotty Cameron Studio Style Fastback 2 Long Design Putter

Mallet Putter

The Fastback shape has been kicking around Scotty Cameron's mallet lineup for a long time, and the 2026 Studio Style Fastback 2 Long Design is the version for players who want real mass behind the ball without carrying something that looks like lab equipment. The rear of the head runs deeper front to back than a standard blade-style mallet, which pushes weight away from the face and calms the head down through impact. Everything else stays quiet. Squared-off back edge, clean transitions, no paint doing the work for you.

The important number here is toe hang, and this one has mid toe hang. That means it is nowhere near face balanced. Set it on your finger and the toe drops toward the ground at a noticeable angle, which tells you the head wants to rotate open and closed as it swings. If your putter travels on a slight arc and you release the head naturally, that rotation is free help. If you drag the putter dead straight back and through, you will feel this thing fighting you on longer strokes.

The other thing to know before you buy: there is no alignment aid. No sightline on the flange, no dot, no double lines framing the ball. You aim it with the topline and the shape of the body, the way people aimed putters for about seventy years before sightlines took over. Some golfers pick one up and instantly aim better. Others feel lost. There is not much middle ground, and it is worth rolling a few putts before you commit.

Design

The Long Design part of the name refers to the extended body. A deeper footprint moves mass rearward and raises moment of inertia, so off-center hits lose less speed and the face twists less. That is the whole argument for a mallet, and the Fastback 2 gets there without a wingspan. From address the head reads compact because the width stays reasonable even as the body runs back, so it frames the ball rather than swallowing it. Cameron builds these from milled steel with the finish work you expect at this price, and the Studio Style treatment keeps the look restrained instead of loud. The heel-side neck is what generates the mid toe hang, and it also lets the shaft sit slightly ahead of the face at address, which some players read as easier to square. Sole weights let a fitter tune head weight to your shaft length and green speeds, which matters more on a mallet this heavy than most golfers assume.

Who It's For

• You have a slight arc stroke and release the putter head rather than holding the face square through the ball.
• You want mallet stability but find full-size high-MOI heads distracting over the ball.
• You aim well off shape alone and have never trusted a sightline anyway.
• You are coming off a blade and want more forgiveness without changing how your stroke feels.
• You already get fit for putters and will have the length, lie, and head weight dialed in rather than buying off the rack.

Technology

About Scotty Cameron

Scotty Cameron putters are CNC milled from a single block of steel in Carlsbad, California. The attention to detail in weight distribution, sole geometry, and face milling creates a feel that's considered the benchmark in professional golf.

Specifications

Frequently Asked Questions

Why does the Fastback 2 Long Design have no sightline?

Cameron leaves it off on purpose. The argument is that a line encourages you to aim the line instead of aiming the face, and plenty of good putters aim more accurately using the topline and the body shape. Practically, it also keeps your eye on the ball rather than on the putter. Whether that works for you is personal. Take it to a putting green with a chalk line or a laser and check your actual aim before you decide.

Is this putter face balanced?

No. It has mid toe hang, which is a meaningful amount of rotation. Balance it on your finger and the toe will point down toward roughly the halfway position between straight down and horizontal. That suits a stroke with a moderate arc. Straight-back-straight-through putters are usually better served by a face balanced or slight toe hang mallet.

How is the Long Design different from the standard Fastback 2?

The body runs deeper from face to back. That pushes weight further from the face, which bumps up stability on mishits and slows the head's tendency to twist. The tradeoff is a slightly larger visual footprint at address and a head that feels a touch more deliberate to start. If you like the Fastback look but want more help on strikes off the toe, this is the reason to go long.

What length should I order?

Most golfers end up between 33 and 35 inches, and shorter than you think is usually the right answer if your eyes sit inside the ball at address. Length changes effective head weight too, so a 33 inch build normally wants heavier sole weights than a 35. This is the part worth paying a fitter for rather than guessing.

Is a 2026 Scotty Cameron mallet worth the price over a cheaper putter?

Honestly, the roll difference between this and a well-made mid-price mallet is small. What you pay for is milling precision, finish quality, the fitting network, and resale value, which stays unusually strong on Cameron. If you already know your stroke fits mid toe hang and you like putters with no sightline, this is a legitimate long-term gamer. If you are still figuring out your stroke, spend the money on a fitting first and the head second.

Alternatives to the Scotty Cameron Studio Style Fastback 2 Long Design

Other mallet putter models from different brands, closest to its model year.

More from Scotty Cameron