Cleveland Frontline 10.5 Putter

High MOI Putter

The Cleveland Frontline 10.5 came out in 2020 as the biggest mallet in the Frontline family, and the whole point of the line lives right in the name. Cleveland took the tungsten weight that most brands bury in the back of a mallet and pushed it toward the front, closer to the face. Moving mass forward pulls the center of gravity ahead of the shaft axis, which cuts down on the forward skid a ball does right after impact and gets it rolling end over end sooner. On a big high-MOI head like the 10.5, that forward CG works with the wide footprint instead of fighting it.

This is a face-balanced putter, so it wants a stroke that stays fairly straight back and straight through. If you release the face hard and swing on a strong arc, the 10.5 is going to feel like it's resisting you, because it is. Face balanced means the toe stays pointed up when you balance the shaft on a finger, and heads built that way keep the face square through a straighter path. That's not a knock. It's just who this putter is talking to.

Three things define the 10.5: the forward tungsten weighting, the milled SOFT face, and Cleveland's 2135 alignment. Put together, they make a putter aimed at the golfer who misses because of face angle and pace, not because they need to shape putts. If your short putts leak because the face drifts open, and your lags come up short or run long because contact and roll are inconsistent, this head is built for exactly that problem.

Design

The face is where Cleveland spent its money. It's milled with Speed Optimized Face Technology, which they call SOFT, and the milling pattern varies across the face so off-center strikes hold ball speed better than a flat milled face would. Behind that, two tungsten weights sit forward and low, which is what drags the CG toward the front line and boosts stability at the same time. The head is a full mallet, so the perimeter weighting is already high, and the forward mass adds torsional stability without turning the putter into a dead brick. On top you get 2135 Technology, Cleveland's alignment system. The sightline is set at 21.35 millimeters, the height of the golf ball's equator at address, so your eye lines up the aid and the center of the ball on the same plane and small aim errors shrink. The 10.5 pairs that with a clean single-bend hosel to keep it face balanced. Feel off the milled face is firm but not clicky, and Cleveland offered a heavier stability shaft option that steadies the hands on longer strokes.

Who It's For

• You have a straight-back-straight-through stroke and want a face-balanced head that keeps the face square without you managing it.
• Your misses come from face angle and speed control rather than needing to work the ball on and off line.
• You want a large mallet with real forgiveness on toe and heel strikes, since the varied face milling protects ball speed off center.
• Alignment is a weak spot and the 2135 sightline gives you a clearer way to aim at address.
• You tend to leave putts short because the ball skids before it rolls, and the forward CG gets it rolling sooner.

Technology

About Cleveland

Cleveland brings their wedge expertise to putters, focusing on feel and short-game scoring. Their Speed Optimized Face Technology creates consistent ball speed across the face.

Specifications

Frequently Asked Questions

Is the Cleveland Frontline 10.5 face balanced or does it have toe hang?

It's face balanced. Rest the shaft on your finger and the face points straight up at the sky. That setup suits a stroke that moves fairly straight back and straight through. If you have a strong arc with a lot of face rotation, you'll fight this head, and a toe-hang putter would fit you better.

What does the forward CG in the Frontline line actually do?

Cleveland moved the tungsten weighting toward the front of the head instead of the back. That pulls the center of gravity ahead of where it usually sits, which reduces the skid the ball does right after impact and gets it into a true roll sooner. Better initial roll means more predictable pace, which is the main reason to look at a Frontline over a standard mallet.

What is 2135 alignment technology on the 10.5?

The sightline is positioned 21.35 millimeters up, which is the height of the center of the golf ball when it's sitting at address. Because the aid sits on the same plane as the ball's equator, your eye lines them up more accurately and your aim errors get smaller. It's aimed at golfers who struggle to start putts on their intended line.

How is the 10.5 different from the other Frontline models?

The 10.5 is the largest, highest-MOI mallet in the family. All Frontline putters share the forward tungsten weighting, the SOFT milled face, and 2135 alignment, but the 10.5 gives you the most stability and forgiveness of the group. If you want a smaller mallet or a blade shape, other Frontline models fit that, but for maximum stability the 10.5 is the pick.

Does the Frontline 10.5 come with a stability shaft?

Cleveland offered a heavier, stiffer stability shaft option on the Frontline putters alongside the standard steel shaft. The stability shaft quiets the hands and can help golfers who get twitchy over the ball or want a more anchored feel on longer strokes. Check the specific spec of any 10.5 you're buying, since both configurations were sold.

Alternatives to the Cleveland Frontline 10.5

Other high moi putter models from different brands, closest to its model year.

More from Cleveland