Bettinardi Studio Stock 28 Putter

Blade Putter

The Bettinardi Studio Stock 28 is a 2025 blade that gives you the company's milled-in-Illinois feel without the flagship BB Series price. Studio Stock is Bettinardi's line for players who want the CNC craftsmanship and the classic shapes but don't need the top-shelf finish and small-batch tooling of the BB putters. The 28 is a heel-toe weighted blade, the Anser-style shape that has anchored putter design for decades, cut and milled at the Tinley Park shop the same way the more expensive models are.

This is a blade in the traditional sense. Compact head, thin topline, a flange behind the face, and nothing on top to distract your eye. The heel-toe weighting pushes mass out toward the ends of the head, which buys a little forgiveness compared to a pure muscleback blade while keeping the small footprint feel players want at address. It sits square and clean, and it looks like a putter you'd expect to see in a tour bag rather than a superstore rack.

The part you have to get right is the hang. The Studio Stock 28 has full toe hang, so when you balance the shaft on your finger the toe drops toward the ground and points nearly straight down. That's a putter built for a strong arc. If your stroke rotates hard, opening on the way back and releasing through the ball, this head opens and closes right in time with your hands. Putt straight back and through and it will feel like it's turning over on you. Match the hang to how you actually swing the putter and the 28 does its job without a fight.

Design

Everything about the Studio Stock 28 starts with the milling. Bettinardi cuts the head on its CNC machines and finishes the face with its milled pattern, and that process is where the soft, dense response comes from. Studio Stock uses a value-focused build compared to the BB line, but it's still real milled steel, so you get more of the ball at impact than an insert putter gives you. The heel-toe weighting spreads mass to the perimeter of a compact blade, holding line a touch better on misses without inflating the head into something that no longer reads like a blade. Full toe hang is the fit that defines this putter. It ties the face to an aggressive release on a strong arc, so a player with natural rotation gets a head that opens and closes with the hands instead of lagging behind them. There's no alignment aid, just a clean topline for golfers who aim by feel and don't want a sightline pulling their eye. That's a genuine trade. If you start putts online off a line on the crown, the blank top asks you to trust your setup instead. This is a compact, feel-first blade with tour looks and a milled face, priced for players who want the Bettinardi hand without stepping all the way up to the BB Series.

Who It's For

• Players with a strong arc stroke, since the full toe hang matches a face that opens and closes hard through impact rather than staying square.
• Golfers who want milled Bettinardi feel and craftsmanship but don't want to pay flagship BB Series money.
• Blade traditionalists who like a compact Anser-style head with a clean topline and no alignment aid.
• Feel players who aim by setup and want maximum feedback off a milled steel face.
• Anyone who wants a bit more stability than a pure muscleback blade thanks to the heel-toe weighting, while keeping a small footprint at address.

Technology

About Bettinardi

Bettinardi is one of the few brands that still mills every putter in their own facility. Their signature honeycomb face milling and one-piece construction create exceptional feel and consistency.

Specifications

Frequently Asked Questions

How is the Studio Stock 28 different from Bettinardi's BB Series putters?

Studio Stock is the more accessible line. You still get a head milled on Bettinardi's own CNC machines with the milled face and the soft steel feel, but the finish and the small-batch tooling of the BB Series are reserved for the flagship models. The 28 shares the classic heel-toe blade shape with those pricier putters, so it looks and rolls like a Bettinardi at a lower cost. If you want the hand and the feel without the top-shelf price, this is the line that gets you there.

Is the Studio Stock 28 right for my putting stroke?

It depends on how much your stroke arcs. This head has full toe hang, which fits a strong arc where the face opens on the way back and releases through the ball. If your stroke is straight back and straight through, a face-balanced putter will serve you better and the 28 will feel like it turns over. Quick check: balance the shaft on your finger. If the toe drops and points nearly straight down, it's a full toe-hang putter meant for a strong arc.

Does the Studio Stock 28 have an alignment aid?

No. The topline is clean, with just the milled flange behind the face and no sightline or dot. That's a deliberate choice for players who aim by feel and don't want anything pulling their eye at address. If you rely on a line to start putts online, the blank top asks you to trust your setup instead, which is worth knowing before you commit. Plenty of blade players prefer exactly this look.

How forgiving is the Studio Stock 28 on off-center putts?

It's a blade, so forgiveness isn't the headline. The heel-toe weighting pushes mass to the ends of the head, which helps it hold line a little better than a pure muscleback blade on near-misses, but this is still a compact head built for feel and control rather than high MOI. If you miss the center often and want maximum stability, a mallet will protect your speed and line more. The 28 rewards players who find the sweet spot.

What kind of feel does the milled face give the Studio Stock 28?

Soft and solid. Milling the face from steel gives a dense response that lets you sense contact and speed more clearly than most insert putters, and that feedback is a big reason people buy Bettinardi. On center you get a firm, quiet roll, and misses read differently in your hands, which good putters use as information. If you putt by feel, that response is the whole point of the putter.

More from Bettinardi