Skip to main content

Bettinardi

Bettinardi Studio Stock 18 Putter

2024Blade$399

Blade Putter

The Studio Stock 18 is Bettinardi's take on the wide-body blade, and it leans traditional. This is a single-piece milled putter with a full toe hang, which tells you almost everything about who should be looking at it. If your putting stroke swings on a noticeable arc, the face opening and closing through the ball, this head is built to match that motion instead of fighting it.

Bettinardi mills its putters in Tinley Park, Illinois, and the Studio Stock line is where you get that milling quality without stepping up to the hand-finished DASS models. The face carries Bettinardi's honeycomb milling pattern, which is the source of the soft, muted feel these putters are known for. You hear a quiet thud at impact rather than a loud click.

There's no sightline on the top of this one. No dot, no bar, no contrasting flange line. That's a deliberate choice for a feel player who aims off the leading edge and the shape of the head, and it's worth being honest with yourself about whether you're that golfer before you buy.

Design

The 18 is a wider blade than a classic Anser-style head, which pushes a little more weight toward the perimeter and gives you a touch more stability than a slim blade would. The neck is a plumber's-style bend that produces the full toe hang, so the toe points nearly straight down when you balance the shaft on your finger. Clean topline, minimal branding up top, and the milled finish that Bettinardi does well. Everything about the look is quiet. No alignment aid means the topline stays uninterrupted, and the head sits square without visual clutter pulling your eye. It's a putter that assumes you already know how to aim it.

Who It's For

  • You have a moderate to strong arc in your stroke and want a putter with full toe hang to match it
  • Soft feel matters to you and you want the muted response of Bettinardi's milled honeycomb face
  • You aim by the shape of the head and the leading edge rather than a painted sightline
  • You want Bettinardi milling and feel but don't need the hand-finished carbon steel of the higher DASS models
  • A wider blade appeals to you for a bit more forgiveness than a thin traditional blade, without going to a mallet

Technology

Heel-Toe WeightingCompact ProfileHoneycomb Face MillingOne-Piece Construction

About Bettinardi

Bettinardi is one of the few brands that still mills every putter in their own facility. Their signature honeycomb face milling and one-piece construction create exceptional feel and consistency.

Specifications

BrandBettinardi
ModelStudio Stock 18
Year2024
TypeBlade
Toe hangFull toe hang
Alignment aidNo
MSRP$399

Frequently Asked Questions

Is the Bettinardi Studio Stock 18 good for an arc putting stroke?
Yes. It has full toe hang, which is the setup you want for a moderate to strong arc. The face wants to open on the way back and close through impact, so if your stroke naturally does that, this head cooperates. If you have a straight-back-straight-through stroke, look at a face-balanced mallet instead.
Why doesn't the Studio Stock 18 have an alignment line?
It's a design decision aimed at feel players who aim using the leading edge and the overall shape of the head. Some golfers putt better without a line because it keeps them from fixating on the aim point. If you rely on a sightline to set up square, this clean topline may not suit you.
What is the face milling on the Studio Stock 18 and how does it feel?
Bettinardi uses its honeycomb face milling, a fine diamond-shaped pattern cut into the face. The result is a soft, muted feel and a quiet sound at impact rather than a sharp click. It's one of the main reasons people gravitate toward Bettinardi putters.
How is the Studio Stock line different from Bettinardi's more expensive putters?
Studio Stock putters are fully milled and carry the same face technology, but they skip the hand-finishing and premium carbon steel of the DASS (Double Aged Stainless Steel) models. You get Bettinardi milling and feel at a lower price. The DASS models cost more for the softer material and the hand work.
Is the Studio Stock 18 a blade or a mallet?
It's a blade, specifically a wider-body blade. It's more compact and traditional than a mallet, but the extra width gives it slightly more stability than a thin classic blade. It plays like a blade in every way that matters: full toe hang, compact footprint, and a look built for feel players.

Ratings & Reviews

No ratings yet. Sign in to rate this club.

Add this putter to your bag