The Rogue ST Pro is Callaway's answer to a specific problem: how do you build an iron that looks like a players iron at address but still gives up meaningful ball speed. It sits in the players distance category, which means a compact head, a thin topline, and minimal offset paired with the kind of forgiveness that used to only live in chunkier game-improvement irons. The 7-iron comes in at 31.5 degrees, so it's stronger than a traditional forged blade but not jacked to the extreme you see in pure distance irons.
What makes this one work is the hollow-body construction. Instead of a solid forged head, the Pro uses a forged face wrapped around a hollow chamber, then packs tungsten low and toward the toe to keep the center of gravity where it helps launch. That combination is why a low-40s handicap can flight these consistently while a better player can still work the ball and hold a green.
This is not a set for someone chasing maximum forgiveness. If you spray it, the Pro will let you know. But if you strike it reasonably well and want distance without the shovel look, it fits a real gap in the bag.
In short
The Callaway Rogue ST Pro (2022) is a players-distance iron that blends ball speed with a clean shape. The set runs 3-iron to PW with a 31.5° 7-iron. It carries a $1,099 MSRP.
Refresh due soon
Brands in this category update about every 2 years, and the Rogue ST Pro is 4 years old with no successor yet, so a new model could land any time. Grab it at clearance pricing now, or wait a few weeks to see what replaces it.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Modeled from the $1,099 original MSRP and a 4-year-old release (about 27% of MSRP retained used).
Used market value
$250 - $330
Private sale, fair to like-new
Trade-in value
$150 - $230
What a shop typically pays
Get an exact quote
Estimate only, from a depreciation model, not a live quote. Search “Callaway Rogue ST Pro” on the sites above for the real number, which varies with condition, shaft, and demand.
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 19.5° | 22.0° | 25.0° | 28.0° | 31.5° | 35.5° | 40.0° | 45.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Club | Loft | Moderate swing~136y 7-iron | Average swing~151y 7-iron | Faster swing~165y 7-iron |
|---|---|---|---|---|
| 3-iron | 19.5° | 169 y | 188 y | 207 y |
| 4-iron | 22° | 161 y | 179 y | 196 y |
| 5-iron | 25° | 154 y | 171 y | 187 y |
| 6-iron | 28° | 145 y | 161 y | 176 y |
| 7-iron | 31.5° | 136 y | 151 y | 165 y |
| 8-iron | 35.5° | 127 y | 141 y | 154 y |
| 9-iron | 40° | 116 y | 129 y | 141 y |
| PW | 45° | 107 y | 119 y | 130 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
The build here is forged face over a hollow body, with tungsten weighting doing the heavy lifting on the inside. Callaway forges the face for feel and consistent flex, then bonds it to a hollow head that lets the face deflect more at impact for ball speed. The tungsten sits low and out toward the toe, which pulls the center of gravity down and pushes launch up without needing extra loft or a wide sole to get there. Compared to the game-improvement Rogue ST irons, the Pro trims the offset, thins the topline, and shrinks the overall footprint. The lofts are still strong for the category, with a 45-degree pitching wedge and a 25-degree 5-iron, so gapping into your wedges and setting up the long end of the set both need a look. Feel is softer than the stronger lofts would suggest, mostly because of the forged face and the internal urethane damping Callaway builds into the chamber.
The Callaway Rogue ST Pro's 7-iron is lofted at 31.5° - near-traditional - close to the classic 32-34° benchmark. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 145-155 yards. The 5-iron (25°) to 7-iron gap of 6.5° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 45° provides a conventional loft window that pairs cleanly with a 50-52° gap wedge.
Strong for a players-shaped iron. The 7-iron is 31.5 degrees, the 5-iron is 25, and the pitching wedge is 45. That's a couple degrees stronger than a traditional forged set, which is where the extra distance comes from. It also means you'll want to check your wedge gapping below the PW, since a 45-degree pitching wedge leaves a bigger jump to a standard 50 or 52.
The Max is the game-improvement model with a larger head, more offset, a wider sole, and more forgiveness. The Pro is the players distance version: smaller footprint, thinner topline, less offset, and a more compact look at address. Both use hollow-body construction and tungsten, but the Pro is aimed at better ball strikers who want the cleaner shape.
For a mid handicapper who makes decent contact, yes. The hollow body and low tungsten placement keep launch and ball speed steady on shots hit slightly off center. It won't rescue a bad toe or heel strike the way a true game-improvement iron does, so if you miss all over the face, the Max might suit you better.
Less than you'd expect. The forged face plus internal urethane damping softens the sound and impact feel, so it doesn't have the hollow, hot sensation some distance irons give off. It feels firmer than a solid forged players iron, but most players describe it as solid rather than clicky.
It's a common approach. A lot of players run the Pro in the short irons and mix in the more forgiving Rogue ST Max in the long irons, since the lofts and construction are designed to blend. If you struggle with the 4- and 5-iron, that combo gives you easier launch up top while keeping the compact Pro shape in scoring clubs.
No ratings yet. Sign in to rate this club.
Other players distance iron models from different brands, closest to its model year.
Use as your baseline in the recommendation tool, or compare side-by-side with another set.