跳到主要内容

Epon

Epon AF-Tour MB II 铁杆

刀背2018

Epon doesn't advertise much, and it doesn't need to. The brand is the house label of Endo Manufacturing, the Japanese forging operation in Niigata that has quietly made heads for some of the biggest names in golf. When Endo puts its own name on a club, it's the stuff they didn't want to hand over to anyone else. The AF-Tour MB II, released in 2018, is exactly that kind of club, a pure muscle back built for players who already know what they want.

This is not an iron that meets you halfway. The head is compact, the topline is thin, and there's no hidden slot or tungsten plug waiting to bail you out. What you get instead is soft carbon steel forged to tolerances that most mass-market blades can't match, with the kind of finish work that makes club builders go quiet when they pull one out of the box. Strikes from the center feel dense and quiet in a way that's hard to describe until you've done it.

Be honest with yourself before buying one. If your miss is a thin strike off the toe, the MB II will report that back to you every single time. That feedback is the whole point. For the golfer who compresses the ball consistently and wants to work it both directions, few irons from this era offer a cleaner tool for the job.

简而言之

Epon AF-Tour MB II (2018) 是一款紧凑的刀背铁杆,适合追求手感和控球的高水平击球手。套杆为3号铁至PW,7号铁杆面倾角为 36°。2018年发布。

Epon AF-Tour MB II 铁杆: 关键参数

类别
刀背
适合差点范围
0 至 5
套装组成
3号铁至PW
7号铁杆面倾角
36 度
杆面倾角范围
22 至 48 度
型号年份
2018

购买渠道

点击将打开各零售商的搜索页面。价格与库存以零售商为准。

现在买还是再等等?

买或等

即将换代

这一类别的品牌大约每 2 年更新一次,AF-Tour MB II 已经上市 8 年,还没有后继型号,所以新款随时可能发布。可以现在以清仓价入手,也可以再等几周看看接替它的是什么。

基于发布时间和该系列通常的换代周期,并非实时报价。

杆面倾角参数

Epon AF-Tour MB II 的7号铁杆面倾角为 36 度。套杆为3号铁至PW。适合差点 0 至 5 的球手。

Epon AF-Tour MB II (2018) 杆面倾角表
球杆杆面倾角
3i22°
4i25°
5i28°
6i32°
7i36°
8i40°
9i44°
PW48°

数据涵盖 3i 至 PW (共 8 支)。如果 Epon 为这套杆提供其他球杆 (例如间隙挖起杆),目前还不在我们的数据中。

AF-Tour MB II 各号杆面倾角

  • Epon AF-Tour MB II 3号铁杆面倾角: 22 度
  • Epon AF-Tour MB II 4号铁杆面倾角: 25 度
  • Epon AF-Tour MB II 5号铁杆面倾角: 28 度
  • Epon AF-Tour MB II 6号铁杆面倾角: 32 度
  • Epon AF-Tour MB II 7号铁杆面倾角: 36 度
  • Epon AF-Tour MB II 8号铁杆面倾角: 40 度
  • Epon AF-Tour MB II 9号铁杆面倾角: 44 度
  • Epon AF-Tour MB II 劈起杆杆面倾角: 48 度

原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。

已与制造商规格页存档核对的杆面倾角 (2026年11月15日)

全部 Epon 铁杆杆面倾角

Epon AF-Tour MB II: 预计飞行距离

按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。

球杆杆面倾角中等挥速7号铁约 125y平均挥速7号铁约 140y较快挥速7号铁约 154y
3号铁22°156 y175 y193 y
4号铁25°148 y166 y183 y
5号铁28°142 y159 y175 y
6号铁32°134 y150 y165 y
7号铁36°125 y140 y154 y
8号铁40°117 y131 y144 y
9号铁44°107 y120 y132 y
PW48°98 y110 y121 y

飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。

关于 Epon AF-Tour MB II

The MB II follows the classic Japanese muscle back template: a short blade length, minimal offset, and a muscle pad positioned right behind the impact area to keep mass directly where better players strike it. Epon forges these from soft carbon steel in-house at Endo, and the precision shows up in small ways, like how consistent the leading edges and grinds are from head to head. There's no badge, no cavity paint, nothing to distract from the shape sitting behind the ball. Compared to the original AF-Tour MB, the II refined the profile slightly and cleaned up the sole to move through turf a bit more predictably. It still sets up like a traditional blade, square and unapologetic. These were typically sold as component heads through fitters rather than off the rack, so most examples you'll find are custom builds, which is worth checking when buying used.

杆面倾角分析

Epon AF-Tour MB II 的7号铁杆面倾角为 36°,偏弱,倾角比大多数现代铁杆更大。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 129 至 139 码。5号铁 (28°) 与7号铁之间相差 8°,间隔较大,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 48°,属于传统倾角,自然搭配标准的 52° 间隙挖起杆。

Epon AF-Tour MB II 适合哪些球手?

  • ✓Low single-digit players who strike the center of the face consistently and want maximum feedback on every shot.
  • ✓Golfers who shape shots on purpose and prioritize trajectory control over distance.
  • ✓Equipment purists who care about forging quality and are willing to pay JDM prices to get it.
  • ✓Players building a custom set through a fitter, since these heads were sold component-style rather than pre-built.
  • ✓Anyone with a forgiving iron already in the bag who wants a blade for practice or soft-condition rounds.

相关阅读

常见问题

Who actually makes Epon irons?

Endo Manufacturing in Niigata, Japan. Epon is Endo's own consumer brand, and the same factory has forged heads under contract for major OEMs for decades. With the AF-Tour MB II you're buying direct from the forge rather than through a big brand's markup and marketing.

How forgiving is the AF-Tour MB II?

It isn't, and it doesn't pretend to be. This is a compact muscle back with mass concentrated behind the sweet spot. Center strikes feel exceptional, but heel and toe misses lose noticeable distance. If you need help on off-center hits, look at Epon's cavity back models instead.

What handicap should you be to play the AF-Tour MB II?

There's no hard rule, but realistically this iron suits players around a 5 handicap or better who practice regularly. The deciding factor is strike quality, not the number on your card. If you find the center of the face most of the time, you can play it.

Is the Epon AF-Tour MB II worth the price over a mainstream blade?

That depends on what you value. A Titleist or Mizuno blade performs comparably for most golfers at a lower cost. What you pay Epon for is the forging quality, tighter head-to-head consistency, and the finish work. Players who notice those details tend to think it's worth it. Players who don't probably shouldn't spend the money.

Can the AF-Tour MB II be bent for custom lofts and lies?

Yes. The soft carbon steel construction bends easily, which is part of the appeal. Since these heads were usually sold through fitters as components, custom loft and lie setups are common. Any competent club builder can adjust them without trouble.

Epon AF-Tour MB II 铁杆适合高差点球手吗?

不太适合。Epon AF-Tour MB II 是面向击球稳定球手的刀背设计。这一类别通常适合差点 0 至 5 的球手。高差点球手会觉得进阶型款式更宽容。

Epon AF-Tour MB II 的替代选择

其他品牌的刀背 铁杆型号,按发布年份最接近排列。

更多 Epon 铁杆

看看这套铁杆是否适合你

在推荐工具中把它设为基准,或与另一套铁杆并排比较。