跳到主要内容

Epon

Epon AF-505 铁杆

进阶型2018

Epon does not make many clubs for average golfers. The Japanese brand, forged by Endo Manufacturing in Tsubame-Sanjo, built its reputation on players irons for low handicappers who care about feel above everything. The AF-505 from 2018 is the exception. It is the most forgiving iron in the AF-500 series, built for golfers who want Endo's forging quality without needing a single-digit handicap to use it.

That combination is rare. Most game improvement irons come from big brands running cast production lines, because casting is cheaper and easier at volume. Epon forged the AF-505 anyway, which means you get the soft, dense impact feel that boutique Japanese irons are known for, in a head shape that helps you on mishits. It costs more than a Callaway or TaylorMade equivalent, often a lot more once you factor in shafts and import pricing.

So the real question is whether forged feel in a forgiving package is worth the premium to you. If you have never hit a Japanese forged iron, the difference at impact is not subtle. If you just want max distance and forgiveness per dollar, this is not the value play, and Epon would probably tell you the same thing.

简而言之

Epon AF-505 (2018) 是一款容错性高、追求稳定距离的进阶铁杆。套杆为4号铁至PW,7号铁杆面倾角为 31°。2018年发布。

Epon AF-505 铁杆: 关键参数

类别
进阶型
适合差点范围
12 至 24
套装组成
4号铁至PW
7号铁杆面倾角
31 度
杆面倾角范围
22 至 45 度
型号年份
2018

购买渠道

点击将打开各零售商的搜索页面。价格与库存以零售商为准。

现在买还是再等等?

买或等

即将换代

这一类别的品牌大约每 2 年更新一次,AF-505 已经上市 8 年,还没有后继型号,所以新款随时可能发布。可以现在以清仓价入手,也可以再等几周看看接替它的是什么。

基于发布时间和该系列通常的换代周期,并非实时报价。

杆面倾角参数

Epon AF-505 的7号铁杆面倾角为 31 度。套杆为4号铁至PW。适合差点 12 至 24 的球手。

Epon AF-505 (2018) 杆面倾角表
球杆杆面倾角
4i22°
5i25°
6i28°
7i31°
8i35°
9i40°
PW45°

数据涵盖 4i 至 PW (共 7 支)。如果 Epon 为这套杆提供其他球杆 (例如间隙挖起杆),目前还不在我们的数据中。

AF-505 各号杆面倾角

  • Epon AF-505 4号铁杆面倾角: 22 度
  • Epon AF-505 5号铁杆面倾角: 25 度
  • Epon AF-505 6号铁杆面倾角: 28 度
  • Epon AF-505 7号铁杆面倾角: 31 度
  • Epon AF-505 8号铁杆面倾角: 35 度
  • Epon AF-505 9号铁杆面倾角: 40 度
  • Epon AF-505 劈起杆杆面倾角: 45 度

原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。

已与制造商规格页存档核对的杆面倾角 (2026年11月15日)

全部 Epon 铁杆杆面倾角

Epon AF-505: 预计飞行距离

按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。

球杆杆面倾角中等挥速7号铁约 137y平均挥速7号铁约 152y较快挥速7号铁约 166y
4号铁22°163 y181 y198 y
5号铁25°155 y172 y188 y
6号铁28°147 y163 y178 y
7号铁31°137 y152 y166 y
8号铁35°128 y142 y155 y
9号铁40°117 y130 y142 y
PW45°108 y120 y131 y

飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。

关于 Epon AF-505

The AF-505 uses a larger head than the rest of the AF-500 line, with a wider sole, a thicker topline, and more offset than Epon's players models. The extra sole width pushes the center of gravity lower and deeper, which makes the ball easier to launch and keeps thin strikes playable. Perimeter weighting does the forgiveness work on toe and heel misses. By Epon standards it is a big iron. By mainstream game improvement standards it is still fairly clean at address, without the shovel look some clubs in this category carry. Construction is where it separates itself. Endo forges the head rather than casting it, and the finish work is done to the same standard as Epon's tour-level irons. Grain flow forging tightens the metal structure, which is a big part of why these irons feel softer at impact than a cast head of the same shape. Epon sells heads only in most markets, so the club gets built to order with your choice of shaft rather than coming off a rack in one stock spec.

杆面倾角分析

Epon AF-505 的7号铁杆面倾角为 31°,接近传统,与经典的 32 至 34° 基准相近。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 147 至 157 码。5号铁 (25°) 与7号铁之间相差 6°,间隔合理,中铁之间的距离可以清楚分开。劈起杆倾角为 45°,属于常规范围,可以顺畅搭配 50 至 52° 的间隙挖起杆。

Epon AF-505 适合哪些球手?

  • ✓Mid to high handicappers who want genuine forged feel instead of the cast heads most game improvement irons use.
  • ✓Improving players who plan to keep a set for years and would rather buy once than trade through three OEM releases.
  • ✓Fans of Japanese forged equipment who need more launch help and mishit protection than a players iron gives them.
  • ✓Golfers getting custom fit, since AF-505 heads are typically sold component-style and built with the shaft that suits your swing.

相关阅读

常见问题

Is the Epon AF-505 forgiving enough for a high handicapper?

Yes, within reason. It is the most forgiving iron Epon made in this era, with a wide sole, low center of gravity, and real perimeter weighting. It will not rescue you like an oversized super game improvement iron with a hollow body, but for a golfer shooting in the 90s it offers plenty of help while looking like a proper iron at address.

Who actually makes Epon clubs?

Endo Manufacturing, a Japanese forging house in the Tsubame-Sanjo region of Niigata. Endo has forged heads for major brands' tour irons for decades. Epon is Endo's own consumer brand, so buying an AF-505 means buying directly from the factory that other companies contract for their best forgings.

How does the AF-505 compare to the other Epon AF-500 series irons?

It sits at the forgiving end of the family. The lower-numbered models like the AF-302 and AF-503 are smaller, with narrower soles and less offset, aimed at better ball strikers. The AF-505 has the largest head, the widest sole, and the most launch help, making it the entry point into Epon for mid and high handicap players.

Is the Epon AF-505 worth the price over a mainstream game improvement iron?

Only if feel and build quality matter to you. On pure forgiveness and distance per dollar, a Ping G-series or Callaway equivalent wins. What you pay for with the AF-505 is forged construction, Endo's finishing standards, and a custom build. Golfers who value those things rarely regret it. Golfers shopping on specs alone usually should not pay the premium.

Can I still find the Epon AF-505 in 2026?

New stock is essentially gone since Epon has moved on to newer models, but the Japanese used market is a realistic option. Sites that export from Japan regularly list AF-505 heads and built sets. Check face wear and groove condition carefully, and remember that most sets were custom built, so the shafts in a used set may not suit you.

更多 Epon 铁杆

看看这套铁杆是否适合你

在推荐工具中把它设为基准,或与另一套铁杆并排比较。