Honma does not make many concessions to the average golfer, and the TW747 P is proof. Released in 2019 as part of the Tour World 747 line, this is a forged muscle back built for players who strike the center of the face often enough to earn one. The lofts tell you everything about the philosophy here. A 34 degree 7-iron and a 48 degree pitching wedge are traditional numbers, the kind you see when a company cares more about gapping and trajectory than about winning a distance comparison on a launch monitor.
What separates the TW747 P from other blades of its era is where it comes from. Honma forges its irons at its own factory in Sakata, Japan, and the finish work reflects that. The shaping is clean, the topline is thin, and the sole is cut for players who take shallow to moderate divots. There is also a vibration dampening element worked into the design, which softens the sting on slight mishits without muddying the feedback good ball strikers rely on.
This is not an iron that pretends to be forgiving. It rewards precision and punishes carelessness, and for a certain kind of golfer, that trade is exactly the point.
Tóm lại
The Honma TW747 P (2019) is a compact blade for skilled ball-strikers who want feel and shot control. The set runs 3-iron to PW with a 34° 7-iron. It carries a $1,399 MSRP.
Honma TW747 P Gậy sắt: Thông số chính
- Danh mục
- Blade
- Cấu thành bộ gậy
- 3-iron to PW
- 7-iron loft
- 34 degrees
- Khoảng loft
- 21 to 48 degrees
- Năm sản xuất
- 2019
- MSRP
- $1399
Mua ngay hay chờ đợi?
Mua hay chờRefresh due soon
Brands in this category update about every 2 years, and the TW747 P is 7 years old with no successor yet, so a new model could land any time. Grab it at clearance pricing now, or wait a few weeks to see what replaces it.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Bán hoặc đổi cũ lấy mới
Ước tínhModeled from the $1,399 original MSRP and a 7-year-old release (about 18% of MSRP retained used).
Giá trị thị trường đã qua sử dụng
$215 - $280
Private sale, fair to like-new
Giá trị đổi cũ lấy mới
$130 - $195
Mức giá cửa hàng thường trả
Nhận báo giá chính xác
Estimate only, from a depreciation model, not a live quote. Search “Honma TW747 P” on the sites above for the real number, which varies with condition, shaft, and demand.
Honma TW747 P: the iron lineage
The TW747 P is the 2nd of 2 generations Honma has released in this line, from the TW737 P (2017) to the TW747 P (2019). It followed the TW737 P (2017) and came in up $100. It is the newest generation in the line.
- 2019TW747 PYou are here· $1,399 MSRP
Thông số Loft
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 21.0° | 24.0° | 27.0° | 30.0° | 34.0° | 38.0° | 43.0° | 48.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Honma TW747 P: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Gậy | Loft | Moderate swing~130y 7-iron | Average swing~145y 7-iron | Faster swing~159y 7-iron |
|---|---|---|---|---|
| 3-iron | 21° | 162 y | 181 y | 199 y |
| 4-iron | 24° | 154 y | 172 y | 189 y |
| 5-iron | 27° | 147 y | 164 y | 180 y |
| 6-iron | 30° | 139 y | 155 y | 170 y |
| 7-iron | 34° | 130 y | 145 y | 159 y |
| 8-iron | 38° | 121 y | 135 y | 148 y |
| 9-iron | 43° | 111 y | 124 y | 136 y |
| PW | 48° | 102 y | 114 y | 125 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
Công nghệ
About the Honma TW747 P
The construction is a one piece forging with the mass concentrated in a muscle pad behind the impact area. That placement keeps the center of gravity close to the face center, which is what gives a blade its flighted, controllable trajectory. Honma added a dampening feature to the design, a small departure from blade purism, and it takes the harshness out of thin strikes while leaving the sensation of a pured shot intact. Set makeup runs from a 21 degree 3-iron through the 48 degree pitching wedge, with even four degree gaps through the mid irons stretching to five degrees between the 9-iron and wedge. Those gaps are built for consistent yardage steps rather than inflated numbers, so a well struck 7-iron at 34 degrees flies the distance a 7-iron should.
Phân tích Loft
The Honma TW747 P's 7-iron is lofted at 34° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 136-146 yards. The 5-iron (27°) to 7-iron gap of 7° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 48° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
Who Should Play the Honma TW747 P?
- ✓Low handicap players who already strike their irons near the center and want the workability a muscle back provides.
- ✓Anyone who values traditional lofts and predictable gapping over raw distance from stronger modern setups.
- ✓Fans of Japanese forged irons who want Honma's Sakata craftsmanship without stepping up to the brand's premium priced lines.
Câu hỏi thường gặp
Is the Honma TW747 P a true blade?
Yes. It is a forged muscle back with the mass positioned directly behind the hitting area. Honma did include vibration dampening in the design, which makes it slightly more comfortable on mishits than a raw blade, but the head size, thin topline, and center weighted feel are all classic blade.
What handicap should you be to play the TW747 P?
There is no hard cutoff, but these irons make sense for players around a 5 handicap or better, or mid single digit players with strong iron contact. The head offers little help on shots struck toward the heel or toe, so inconsistent strikers will lose noticeable distance.
Are the TW747 P lofts weak by modern standards?
They are traditional rather than weak. The 34 degree 7-iron sits about two to three degrees weaker than a typical modern game improvement iron. You may see shorter numbers on a launch monitor, but the trade is higher spin, steeper descent angles, and honest gapping down through the 48 degree pitching wedge.
Where are Honma TW747 P irons made?
They are forged and finished at Honma's factory in Sakata, Japan. Honma is one of the few major brands that keeps forging and assembly in house, and the consistency of the grinds and finish on the TW747 P reflects that.
How does the TW747 P compare to the TW747 V?
The P is the muscle back of the family, while the V is a more forgiving players iron with weight moved toward the perimeter. The V flies a bit easier and covers up mishits better. The P offers a purer feel and more shot shaping control for golfers who can supply their own consistency.
Đánh giá & Nhận xét
No ratings yet. Sign in to rate this club.
Alternatives to the Honma TW747 P
Other blade iron models from different brands, closest to its model year.
More Honma Gậy sắt
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.