The TW737 P is Honma's players cavity iron from 2017, part of the Tour World line that the brand built around better-player performance. The P stands for the pocket cavity behind the face, which is where this iron does its quiet work. It's forged, it's clean at address, and it asks for a decent strike without punishing you as hard as a blade would.
What sets this one apart from a lot of what sold in 2017 is the loft. The 7-iron is 34 degrees. That's traditional, not the jacked-up 30 or 31 degrees that game improvement irons were already drifting toward. You give up a few yards on paper, but you get flight you can trust and gaps that stay honest from the middle of the set down to the wedges.
Honma makes these in Sakata, Japan, and the finish shows it. This is a premium iron with a premium price, built for the golfer who values feel and shot control over raw distance numbers. If you play to a single-digit or low-teens handicap and want something forged that still forgives a slightly thin one, the TW737 P is squarely aimed at you.
Tóm lại
The Honma TW737 P (2017) is a players cavity that adds forgiveness without much extra size. The set runs 3-iron to PW with a 34° 7-iron. It carries a $1,299 MSRP.
Honma TW737 P Gậy sắt: Thông số chính
- Danh mục
- Players Cavity
- Cấu thành bộ gậy
- 3-iron to PW
- 7-iron loft
- 34 degrees
- Khoảng loft
- 20 to 46 degrees
- Năm sản xuất
- 2017
- MSRP
- $1299
Mua ngay hay chờ đợi?
Mua ngayLast-gen value buy
The newer TW747 P (2019) is already out, so the TW737 P now sells at closeout pricing. If you do not need the very latest tech, this is the smart-money pick.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Bán hoặc đổi cũ lấy mới
Ước tínhModeled from the $1,299 original MSRP and a 9-year-old release (about 14% of MSRP retained used).
Giá trị thị trường đã qua sử dụng
$155 - $205
Private sale, fair to like-new
Giá trị đổi cũ lấy mới
$95 - $145
Mức giá cửa hàng thường trả
Nhận báo giá chính xác
Estimate only, from a depreciation model, not a live quote. Search “Honma TW737 P” on the sites above for the real number, which varies with condition, shaft, and demand.
Honma TW737 P: the iron lineage
The TW737 P is the 1st of 2 generations Honma has released in this line, from the TW737 P (2017) to the TW747 P (2019). It is where the line started. The TW747 P (2019) replaced it.
- 2017TW737 PYou are here· $1,299 MSRP
Thông số Loft
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 20.0° | 23.0° | 26.0° | 30.0° | 34.0° | 38.0° | 42.0° | 46.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Honma TW737 P: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Gậy | Loft | Moderate swing~130y 7-iron | Average swing~145y 7-iron | Faster swing~159y 7-iron |
|---|---|---|---|---|
| 3-iron | 20° | 162 y | 181 y | 199 y |
| 4-iron | 23° | 154 y | 172 y | 189 y |
| 5-iron | 26° | 147 y | 164 y | 180 y |
| 6-iron | 30° | 139 y | 155 y | 170 y |
| 7-iron | 34° | 130 y | 145 y | 159 y |
| 8-iron | 38° | 121 y | 135 y | 148 y |
| 9-iron | 42° | 111 y | 124 y | 136 y |
| PW | 46° | 102 y | 114 y | 125 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
Công nghệ
About the Honma TW737 P
The pocket cavity is the heart of the design. Removing weight from behind the face and pushing it to the perimeter keeps mishits from bleeding as much speed and helps the ball get up, while the forged body delivers the soft, dense feel Honma is known for. The topline stays reasonably thin and the offset is modest, so it looks like a player's iron in your hands rather than a chunky game improver. Lofts run progressive through the set, from 20 degrees in the 3-iron to 46 in the pitching wedge, with 3 to 4 degree steps between clubs. That spacing keeps your distance gaps consistent and predictable, which matters more than headline distance when you're trying to hit a number into a green.
Phân tích Loft
The Honma TW737 P's 7-iron is lofted at 34° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 136-146 yards. The 5-iron (26°) to 7-iron gap of 8° is spread across a wide range, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 46° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
Who Should Play the Honma TW737 P?
- ✓Single-digit and low-teens handicaps who want a forged feel with a little help on off-center strikes.
- ✓Players moving down from a game improvement iron who prefer traditional lofts and honest yardage gaps over inflated distance.
- ✓Anyone shopping premium Japanese forged irons and willing to pay for Honma's Sakata craftsmanship and finish.
Câu hỏi thường gặp
Is the Honma TW737 P a blade or a cavity back?
It's a cavity back, specifically a pocket cavity forged iron. The pocket behind the face adds forgiveness and helps launch, so it plays easier than a traditional muscleback blade while keeping a clean, compact look at address.
Why does the TW737 P feel shorter than my newer irons?
The lofts are traditional. The 7-iron is 34 degrees, where a lot of modern game improvement 7-irons sit at 30 or 31. You lose a few yards compared to those, but you get a higher, more controllable flight and gaps that stay reliable through the set.
Who is the TW737 P built for?
Low-to-mid handicap golfers who want a forged players iron with some forgiveness. It's not a max game improvement iron and it's not a pure blade. If you strike the ball reasonably well and value feel and control, it fits.
How are the lofts spaced across the set?
They're progressive, running from 20 degrees in the 3-iron down to 46 in the pitching wedge, with 3 to 4 degree steps between clubs. That gives you consistent distance gaps and makes it easy to know what each iron does.
Is the TW737 P worth the premium price?
That depends on what you value. Honma builds these in Japan and the feel and finish reflect it. If you want forged Japanese quality and traditional players cavity performance, it delivers. If you mainly want distance and the lowest price, a mainstream iron will get you there for less.
Đánh giá & Nhận xét
No ratings yet. Sign in to rate this club.
Alternatives to the Honma TW737 P
Other players cavity iron models from different brands, closest to its model year.
More Honma Gậy sắt
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.