Honma has been forging irons in Sakata since the 1950s, and the TW777 PCB Max is the 2026 version of the company's pocket cavity back for players who want that build quality with a wider margin for error. PCB is the platform. Max tells you where this head sits inside it: a larger footprint and a deeper pocket than the tour-issue cavity irons in the same family.
The category matters here. A players cavity is a compromise club by design, and this one leans toward the help side of that compromise without turning into a game improvement iron. You get a blade length and topline that a mid handicapper can look down at with confidence, but the shape still gets thinner and more compact through the short irons the way a good set should. It is not a super game improvement club wearing a nicer badge.
What you are paying for with Honma, beyond the head design, is finish work. The company grinds and polishes its own heads, builds its own Vizard shafts in-house, and prices accordingly. If you have never held a TW iron, the surface quality is a genuine step above what most of the market ships. Whether that is worth the premium over a comparable Japanese forged cavity from Mizuno or Srixon comes down to how much you value the object itself.
Tóm lại
Honma TW777 PCB Max (2026) là một bộ gậy sắt players cavity tăng độ dễ đánh mà không làm đầu gậy to hơn nhiều. Bộ gậy gồm sắt số 5 đến SW, Loft gậy sắt số 7 là 28°. Ra mắt năm 2026. Giá niêm yết (MSRP) là $1,125.
Honma TW777 PCB Max Gậy sắt: Thông số chính
- Danh mục
- Players Cavity
- Handicap phù hợp
- 0 đến 12
- Cấu thành bộ gậy
- sắt số 5 đến SW
- Loft gậy sắt số 7
- 28 độ
- Khoảng loft
- 22 đến 56 độ
- Năm sản xuất
- 2026
- MSRP
- $1125
Nơi mua
Mở trang tìm kiếm của từng nhà bán lẻ cho gậy này. Giá và tồn kho do nhà bán lẻ quyết định.
Mua ngay hay chờ đợi?
Nên cân nhắc chờMẫu mới ra mắt
Là mẫu chủ lực của năm nay, TW777 PCB Max giữ nguyên giá niêm yết (MSRP) và gần như không giảm giá trong thời gian đầu. Muốn dùng mẫu mới nhất ngay? Hãy mua. Muốn tiết kiệm? Giá thường giảm sau khi ra mắt 6 đến 9 tháng.
Dựa trên thời điểm ra mắt và chu kỳ ra mẫu mới thường thấy của dòng này, không phải báo giá trực tiếp.
Bán hoặc đổi cũ lấy mới
Ước tínhƯớc tính từ giá niêm yết gốc $1,125 và mẫu ra mắt năm nay.
Giá trị thị trường đã qua sử dụng
$765 - $1,010
Bán cá nhân, từ khá đến như mới
Giá trị đổi cũ lấy mới
$460 - $705
Mức giá cửa hàng thường trả
Nhận báo giá chính xác
Chỉ là ước tính từ mô hình khấu hao, không phải báo giá trực tiếp. Hãy tìm “Honma TW777 PCB Max” trên các trang ở trên để biết con số thực tế, vốn thay đổi theo tình trạng, cán gậy và nhu cầu.
Thông số Loft
Gậy sắt số 7 của Honma TW777 PCB Max có Loft 28 độ, và bộ gậy gồm sắt số 5 đến SW. Bộ gậy hợp với người chơi có handicap 0 đến 12.
| Gậy | Loft |
|---|---|
| 5i | 22° |
| 6i | 25° |
| 7i | 28° |
| 8i | 32° |
| 9i | 36° |
| PW | 41° |
| AW | 46° |
| SW | 56° |
Dữ liệu gồm 5i đến SW (8 gậy). Nếu Honma bán thêm gậy cho bộ này (ví dụ sắt số 4), chúng tôi chưa có dữ liệu về các gậy đó.
Loft từng gậy TW777 PCB Max
- Loft sắt số 5 của Honma TW777 PCB Max: 22 độ
- Loft sắt số 6 của Honma TW777 PCB Max: 25 độ
- Loft sắt số 7 của Honma TW777 PCB Max: 28 độ
- Loft sắt số 8 của Honma TW777 PCB Max: 32 độ
- Loft sắt số 9 của Honma TW777 PCB Max: 36 độ
- Loft pitching wedge của Honma TW777 PCB Max: 41 độ
- Loft gap wedge của Honma TW777 PCB Max: 46 độ
- Loft sand wedge của Honma TW777 PCB Max: 56 độ
Cán thép tiêu chuẩn. Loft là giá trị gần đúng và có thể chênh lệch theo dung sai sản xuất.
Loft đã đối chiếu với trang thông số của nhà sản xuất (15 thg 11, 2026)
Tất cả Loft gậy sắt HonmaLoft gậy sắt số 7 của Honma theo năm
Honma TW777 PCB Max: khoảng cách carry dự kiến
Khoảng cách carry thông thường theo tốc độ swing, đã điều chỉnh theo Loft thực tế của bộ gậy này. Con số của bạn sẽ khác tùy điểm tiếp bóng, cán gậy và điều kiện sân.
| Gậy | Loft | Swing vừaSắt số 7 ~144y | Swing trung bìnhSắt số 7 ~159y | Swing nhanhSắt số 7 ~173y |
|---|---|---|---|---|
| Sắt số 5 | 22° | 163 y | 180 y | 196 y |
| Sắt số 6 | 25° | 154 y | 170 y | 185 y |
| Sắt số 7 | 28° | 144 y | 159 y | 173 y |
| Sắt số 8 | 32° | 134 y | 148 y | 161 y |
| Sắt số 9 | 36° | 123 y | 136 y | 148 y |
| PW | 41° | 113 y | 125 y | 136 y |
Khoảng cách carry được tính từ số liệu chuẩn dựa trên TrackMan, quy đổi theo Loft của từng gậy, không phải đo trực tiếp với mẫu này.
Giới thiệu Honma TW777 PCB Max
The pocket cavity construction is the whole story. Removing mass from behind and below the face lets Honma relocate that weight to the perimeter and into the sole, which raises MOI and drops the center of gravity. Practical result: off-center strikes lose less ball speed, and the long irons launch higher than a thinner cavity would allow. The Max designation extends this further than the standard PCB head, with a longer blade and more heel-to-toe weighting. Honma forges its TW heads rather than casting them, which is the reason the feel stays soft even with a fast, thin face. Forged carbon steel damps vibration differently than cast stainless, and you notice it most on strikes low in the face where a cast head goes harsh. Expect progressive sole width through the set, wider in the long irons for turf interaction and narrower in the scoring clubs for control.
Phân tích Loft
Gậy sắt số 7 của Honma TW777 PCB Max có Loft 28°, mức hơi mạnh, mạnh hơn Loft truyền thống một chút. Với người chơi có tốc độ swing 85 đến 95 mph, khoảng carry của gậy sắt số 7 ước tính khoảng 157 đến 167 yard. Chênh lệch Loft giữa sắt số 5 (22°) và sắt số 7 là 6°, hợp lý, giúp các gậy sắt tầm trung tách khoảng cách rõ ràng. Pitching wedge có Loft 41°, khá mạnh, nên cân nhắc thêm gap wedge 46 đến 48° để nối khoảng cách tới sand wedge.
Ai nên dùng Honma TW777 PCB Max?
- ✓Mid handicaps in the 8 to 18 range who want a forged iron that still helps on thin and toe strikes.
- ✓Anyone coming out of a game improvement set who wants a cleaner shape but is not ready for a true players iron.
- ✓Players who care about finish quality and are willing to pay a premium for Japanese forging and hand grinding.
- ✓Golfers who struggle to get long irons airborne and need the low CG a pocket cavity provides.
- ✓Better players who want a softer feeling cavity in the 4 through 6 irons to blend with blades or a compact cavity in the scoring clubs.
Bài viết liên quan
Câu hỏi thường gặp
What does PCB stand for on the Honma TW777?
Pocket cavity back. It refers to the hollowed channel behind the lower portion of the face, which lets Honma push weight to the perimeter and low in the head. The Max version takes that concept further than the standard PCB head with a larger profile and more forgiveness.
How does the TW777 PCB Max compare to the standard TW777 cavity iron?
Bigger head, more offset, and a lower center of gravity. The standard cavity is aimed at low handicap and tour players who want workability and a compact look. The Max trades some of that shot shaping control for a wider sweet spot and easier launch, which is the right trade for most golfers who are not carrying a single digit index.
Is the TW777 PCB Max forged?
Yes. Honma forges its Tour World iron heads at its own facility in Sakata, Japan, which is a big part of why the line feels the way it does. Forged carbon steel gives you a softer, more muted impact sensation than a cast head, especially on strikes away from center.
Why are Honma irons more expensive than comparable clubs from other brands?
Honma runs its own forging, grinding, polishing, and shaft manufacturing rather than outsourcing, and the finish work on TW heads takes more hands and more time than a mass produced set. You are also paying for a smaller production run. Performance per dollar, other Japanese forged cavities get close. Build quality per dollar is where Honma earns it.
Should I get the stock Vizard shaft or an aftermarket option?
Start with Vizard and only change if a fitting says otherwise. Honma designs those shafts around its own heads, and the graphite iron options in particular are well regarded for players who want lighter weight without losing stability. If you already know your numbers with a specific steel shaft, ordering it as a custom build is usually straightforward through a Honma dealer.
Gậy sắt Honma TW777 PCB Max có hợp với người chơi handicap cao không?
Không. Honma TW777 PCB Max là thiết kế Players Cavity dành cho người đánh bóng tốt. Dòng này thường hợp với handicap 0 đến 12. Người chơi handicap cao sẽ thấy mẫu Game Improvement dễ đánh hơn.
Lựa chọn thay thế cho Honma TW777 PCB Max
Các mẫu Players Cavity Gậy sắt khác từ những thương hiệu khác, có năm ra mắt gần nhất.
So sánh TW777 PCB Max với
Thêm gậy sắt Honma
Xem bộ gậy sắt này có hợp với bạn không
Dùng làm bộ gậy gốc trong công cụ gợi ý, hoặc so sánh song song với một bộ khác.