本文へスキップ

Epon

Epon AF-306 アイアン

プレーヤーズキャビティ2022

Epon doesn't advertise much, and the AF-306 is a good example of why they don't need to. Released in 2015, this players cavity comes out of Endo Manufacturing in Niigata, Japan, the same forging house that has quietly built heads for several major brands over the years. Epon is Endo's own label, which means no middleman and no compromises on the forging process. Golfers who know, know.

The AF-306 slots into that narrow space between a true blade and a game improvement iron. It has a cavity, but a shallow one. It gives you some help on thin strikes and slight mishits without inflating the head size or hiding the topline under a shelf of tungsten. Feel is the headline here. Soft carbon steel, a dense center strike sensation, and feedback that tells you exactly where you caught it.

Finding one in 2026 means shopping the used JDM market or a specialty fitter, and prices hold up better than most irons from that era. That says something about how these were built.

要点

Epon AF-306 (2022年) はサイズをあまり大きくせずにやさしさを加えたプレーヤーズキャビティアイアンです。セット構成は4番アイアン~PWで、7番アイアンのロフトは32°です。2022年発売。

Epon AF-306 アイアン: 主要スペック

カテゴリ
プレーヤーズキャビティ
目安ハンディキャップ
0~12
セット構成
4番アイアン~PW
7番アイアンのロフト
32度
ロフト範囲
23~46度
モデル年式
2022

購入先

各ショップの検索ページを開きます。価格と在庫は各ショップのものです。

今買うべきか、待つべきか?

買うか待つか

モデルチェンジ間近

このカテゴリーのブランドは約2年ごとにモデルを更新します。AF-306は発売から4年たっても後継モデルがまだないため、いつ新モデルが出てもおかしくありません。今のうちに値下がり価格で買うか、数週間待って後継モデルを確かめましょう。

発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。

ロフトスペック

Epon AF-306の7番アイアンのロフトは32度です。セット構成は4番アイアン~PWです。ハンディキャップ0~12のゴルファーに合います。

Epon AF-306 (2022年) ロフト表
クラブロフト
4i23°
5i26°
6i29°
7i32°
8i36°
9i41°
PW46°

データの範囲は4i~PW (7本) です。Eponがこのセットに追加のクラブ (例: ギャップウェッジ) を用意していても、まだデータには入っていません。

AF-306 クラブ別ロフト

  • Epon AF-306 4番アイアンのロフト: 23度
  • Epon AF-306 5番アイアンのロフト: 26度
  • Epon AF-306 6番アイアンのロフト: 29度
  • Epon AF-306 7番アイアンのロフト: 32度
  • Epon AF-306 8番アイアンのロフト: 36度
  • Epon AF-306 9番アイアンのロフト: 41度
  • Epon AF-306 ピッチングウェッジのロフト: 46度

純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。

販売店の標準スペック表で確認したロフト (2026年11月15日)

Eponのアイアンロフト一覧

Epon AF-306: 予想キャリー距離

ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。

クラブロフトゆっくりめのスイング7番アイアン 約135y平均的なスイング7番アイアン 約150y速めのスイング7番アイアン 約164y
4番アイアン23°160 y178 y195 y
5番アイアン26°152 y169 y185 y
6番アイアン29°144 y160 y175 y
7番アイアン32°135 y150 y164 y
8番アイアン36°125 y139 y152 y
9番アイアン41°115 y128 y140 y
PW46°106 y118 y129 y

キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。

Epon AF-306について

This is a one-piece forging in soft carbon steel, done the traditional way rather than cast and milled to look forged. The cavity is modest, with weight pushed toward the perimeter just enough to steady the head on off-center hits. Sole width sits in the middle of the players category, and the topline is thin without being intimidating. Nothing about the shape screams for attention at address, which is exactly the point. Epon sold the AF-306 primarily as a component head, so most examples in the wild were custom built. That's worth checking when you buy used, because shaft, length, and lie can vary a lot from one set to the next.

ロフト分析

Epon AF-306の7番アイアンのロフトは32°で、従来に近く、クラシックな32~34°の基準とほぼ同じです。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約143~153ヤードと見込まれます。5番アイアン(26°)と7番アイアンのロフト差は6°で、間隔は適切です。ミドルアイアンの距離差がきれいに分かれます。ピッチングウェッジのロフトは46°で、従来どおりのロフトで、標準的な52°のギャップウェッジと自然に組み合わせられます。

Epon AF-306はどんな人に向いている?

  • ✓Single digit and low teens handicappers who want blade-like feel with a small margin for error built in.
  • ✓JDM equipment fans who care about forging quality and are willing to buy used or through a specialty fitter to get it.
  • ✓Players moving down from a mid-size cavity back who aren't ready to commit to a full muscle back.

関連記事

よくある質問

Who actually makes Epon irons like the AF-306?

Endo Manufacturing, a Japanese forging company based in Niigata. Epon is Endo's in-house brand, and Endo has forged heads under contract for several well-known OEMs. With the AF-306 you're buying directly from the factory's own line.

Is the Epon AF-306 forgiving enough for a mid handicapper?

It depends on your ball striking more than your handicap. The cavity adds real stability compared to a blade, but the head is still compact and the sweet spot rewards center contact. A 12 handicap who strikes it well can play these. A 12 handicap who sprays it across the face will find them punishing.

What steel is the AF-306 forged from?

Soft carbon steel, forged as a single piece. That's the traditional Japanese approach and it's the main reason the impact feel gets praised so often. There's no multi-material construction or face insert, just one billet shaped into a head.

Are Epon AF-306 irons still worth buying used in 2026?

If the faces and grooves are in good shape, yes. Forged carbon steel wears with heavy use, so inspect the strike area before paying a premium. Because most sets were custom assembled, also confirm the shafts and specs match what you'd actually play, or budget for a rebuild.

How does the AF-306 compare to other Epon irons from that era?

It sits between Epon's smaller tour-style heads and the larger, more forgiving AF-500 series models. If you want maximum workability, the tour heads are the pick. If you want more launch and mishit help, look at the bigger AF models. The AF-306 is the middle path, and for many players the most practical Epon of its generation.

Epon AF-306 アイアンは高ハンディキャップのゴルファーに向いていますか?

いいえ。Epon AF-306はボールをしっかり打てるゴルファー向けのプレーヤーズキャビティ設計です。このカテゴリーは一般にハンディキャップ0~12のゴルファーに合います。高ハンディキャップのゴルファーには、ゲームインプルーブメントモデルのほうがやさしく感じられます。

Epon AF-306の代わりになるモデル

ほかのブランドのプレーヤーズキャビティ アイアンのうち、発売年が近いモデルです。

Eponのアイアンをもっと見る

このアイアンが自分のゲームに合うか確かめる

おすすめツールの基準セットとして使うか、ほかのセットと並べて比較できます。