Epon does not make many clubs for average golfers. The Japanese brand, forged by Endo Manufacturing in Tsubame-Sanjo, built its reputation on players irons for low handicappers who care about feel above everything. The AF-505 from 2018 is the exception. It is the most forgiving iron in the AF-500 series, built for golfers who want Endo's forging quality without needing a single-digit handicap to use it.
That combination is rare. Most game improvement irons come from big brands running cast production lines, because casting is cheaper and easier at volume. Epon forged the AF-505 anyway, which means you get the soft, dense impact feel that boutique Japanese irons are known for, in a head shape that helps you on mishits. It costs more than a Callaway or TaylorMade equivalent, often a lot more once you factor in shafts and import pricing.
So the real question is whether forged feel in a forgiving package is worth the premium to you. If you have never hit a Japanese forged iron, the difference at impact is not subtle. If you just want max distance and forgiveness per dollar, this is not the value play, and Epon would probably tell you the same thing.
要点
Epon AF-505 (2018年) は安定した飛距離のために設計された、やさしいゲームインプルーブメントアイアンです。セット構成は4番アイアン~PWで、7番アイアンのロフトは31°です。2018年発売。
Epon AF-505 アイアン: 主要スペック
- カテゴリ
- ゲームインプルーブメント
- 目安ハンディキャップ
- 12~24
- セット構成
- 4番アイアン~PW
- 7番アイアンのロフト
- 31度
- ロフト範囲
- 22~45度
- モデル年式
- 2018
購入先
各ショップの検索ページを開きます。価格と在庫は各ショップのものです。
今買うべきか、待つべきか?
買うか待つかモデルチェンジ間近
このカテゴリーのブランドは約2年ごとにモデルを更新します。AF-505は発売から8年たっても後継モデルがまだないため、いつ新モデルが出てもおかしくありません。今のうちに値下がり価格で買うか、数週間待って後継モデルを確かめましょう。
発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。
ロフトスペック
Epon AF-505の7番アイアンのロフトは31度です。セット構成は4番アイアン~PWです。ハンディキャップ12~24のゴルファーに合います。
| クラブ | ロフト |
|---|---|
| 4i | 22° |
| 5i | 25° |
| 6i | 28° |
| 7i | 31° |
| 8i | 35° |
| 9i | 40° |
| PW | 45° |
データの範囲は4i~PW (7本) です。Eponがこのセットに追加のクラブ (例: ギャップウェッジ) を用意していても、まだデータには入っていません。
AF-505 クラブ別ロフト
- Epon AF-505 4番アイアンのロフト: 22度
- Epon AF-505 5番アイアンのロフト: 25度
- Epon AF-505 6番アイアンのロフト: 28度
- Epon AF-505 7番アイアンのロフト: 31度
- Epon AF-505 8番アイアンのロフト: 35度
- Epon AF-505 9番アイアンのロフト: 40度
- Epon AF-505 ピッチングウェッジのロフト: 45度
純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。
メーカーのスペックページ(アーカイブ)で確認したロフト (2026年11月15日)
Epon AF-505: 予想キャリー距離
ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。
| クラブ | ロフト | ゆっくりめのスイング7番アイアン 約137y | 平均的なスイング7番アイアン 約152y | 速めのスイング7番アイアン 約166y |
|---|---|---|---|---|
| 4番アイアン | 22° | 163 y | 181 y | 198 y |
| 5番アイアン | 25° | 155 y | 172 y | 188 y |
| 6番アイアン | 28° | 147 y | 163 y | 178 y |
| 7番アイアン | 31° | 137 y | 152 y | 166 y |
| 8番アイアン | 35° | 128 y | 142 y | 155 y |
| 9番アイアン | 40° | 117 y | 130 y | 142 y |
| PW | 45° | 108 y | 120 y | 131 y |
キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。
Epon AF-505について
The AF-505 uses a larger head than the rest of the AF-500 line, with a wider sole, a thicker topline, and more offset than Epon's players models. The extra sole width pushes the center of gravity lower and deeper, which makes the ball easier to launch and keeps thin strikes playable. Perimeter weighting does the forgiveness work on toe and heel misses. By Epon standards it is a big iron. By mainstream game improvement standards it is still fairly clean at address, without the shovel look some clubs in this category carry. Construction is where it separates itself. Endo forges the head rather than casting it, and the finish work is done to the same standard as Epon's tour-level irons. Grain flow forging tightens the metal structure, which is a big part of why these irons feel softer at impact than a cast head of the same shape. Epon sells heads only in most markets, so the club gets built to order with your choice of shaft rather than coming off a rack in one stock spec.
ロフト分析
Epon AF-505の7番アイアンのロフトは31°で、従来に近く、クラシックな32~34°の基準とほぼ同じです。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約147~157ヤードと見込まれます。5番アイアン(25°)と7番アイアンのロフト差は6°で、間隔は適切です。ミドルアイアンの距離差がきれいに分かれます。ピッチングウェッジのロフトは45°で、一般的な範囲で、50~52°のギャップウェッジときれいにつながります。
Epon AF-505はどんな人に向いている?
- ✓Mid to high handicappers who want genuine forged feel instead of the cast heads most game improvement irons use.
- ✓Improving players who plan to keep a set for years and would rather buy once than trade through three OEM releases.
- ✓Fans of Japanese forged equipment who need more launch help and mishit protection than a players iron gives them.
- ✓Golfers getting custom fit, since AF-505 heads are typically sold component-style and built with the shaft that suits your swing.
関連記事
よくある質問
Is the Epon AF-505 forgiving enough for a high handicapper?
Yes, within reason. It is the most forgiving iron Epon made in this era, with a wide sole, low center of gravity, and real perimeter weighting. It will not rescue you like an oversized super game improvement iron with a hollow body, but for a golfer shooting in the 90s it offers plenty of help while looking like a proper iron at address.
Who actually makes Epon clubs?
Endo Manufacturing, a Japanese forging house in the Tsubame-Sanjo region of Niigata. Endo has forged heads for major brands' tour irons for decades. Epon is Endo's own consumer brand, so buying an AF-505 means buying directly from the factory that other companies contract for their best forgings.
How does the AF-505 compare to the other Epon AF-500 series irons?
It sits at the forgiving end of the family. The lower-numbered models like the AF-302 and AF-503 are smaller, with narrower soles and less offset, aimed at better ball strikers. The AF-505 has the largest head, the widest sole, and the most launch help, making it the entry point into Epon for mid and high handicap players.
Is the Epon AF-505 worth the price over a mainstream game improvement iron?
Only if feel and build quality matter to you. On pure forgiveness and distance per dollar, a Ping G-series or Callaway equivalent wins. What you pay for with the AF-505 is forged construction, Endo's finishing standards, and a custom build. Golfers who value those things rarely regret it. Golfers shopping on specs alone usually should not pay the premium.
Can I still find the Epon AF-505 in 2026?
New stock is essentially gone since Epon has moved on to newer models, but the Japanese used market is a realistic option. Sites that export from Japan regularly list AF-505 heads and built sets. Check face wear and groove condition carefully, and remember that most sets were custom built, so the shafts in a used set may not suit you.
Epon AF-505の代わりになるモデル
ほかのブランドのゲームインプルーブメント アイアンのうち、発売年が近いモデルです。