Epon doesn't advertise much, and the AF-707 explains why they don't need to. Epon is the house brand of Endo Manufacturing, the Japanese forging house that has quietly made heads for some of the biggest names in golf. When Endo puts its own name on a club, it keeps the good stuff for itself. The AF-707 arrived in 2017 as a players cavity, which means a compact head, a thin topline, and just enough perimeter weighting to keep you honest on slight misses.
This is not a club you'll find on a rack at a big-box store. Epon sells through fitters and specialty shops, and the AF-707 was built for golfers who care about feel and turf interaction more than ball speed claims. The forging is the selling point. Soft carbon steel, tight tolerances, and the kind of impact feedback that tells you exactly where on the face you hit it.
Be clear-eyed about what you're buying. A players cavity from Epon gives you a small margin for error, not a big one. If you strike it well, few irons feel better. If you don't, the AF-707 will tell you, politely but every single time.
要点
Epon AF-707 (2017年) はサイズをあまり大きくせずにやさしさを加えたプレーヤーズキャビティアイアンです。セット構成は5番アイアン~SWで、7番アイアンのロフトは29°です。2017年発売。
Epon AF-707 アイアン: 主要スペック
- カテゴリ
- プレーヤーズキャビティ
- 目安ハンディキャップ
- 0~12
- セット構成
- 5番アイアン~SW
- 7番アイアンのロフト
- 29度
- ロフト範囲
- 23~55度
- モデル年式
- 2017
購入先
各ショップの検索ページを開きます。価格と在庫は各ショップのものです。
今買うべきか、待つべきか?
買うか待つかモデルチェンジ間近
このカテゴリーのブランドは約2年ごとにモデルを更新します。AF-707は発売から9年たっても後継モデルがまだないため、いつ新モデルが出てもおかしくありません。今のうちに値下がり価格で買うか、数週間待って後継モデルを確かめましょう。
発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。
ロフトスペック
Epon AF-707の7番アイアンのロフトは29度です。セット構成は5番アイアン~SWです。ハンディキャップ0~12のゴルファーに合います。
| クラブ | ロフト |
|---|---|
| 5i | 23° |
| 6i | 26° |
| 7i | 29° |
| 8i | 33° |
| 9i | 38° |
| PW | 43° |
| AW | 48° |
| SW | 55° |
データの範囲は5i~SW (8本) です。Eponがこのセットに追加のクラブ (例: 4番アイアン) を用意していても、まだデータには入っていません。
AF-707 クラブ別ロフト
- Epon AF-707 5番アイアンのロフト: 23度
- Epon AF-707 6番アイアンのロフト: 26度
- Epon AF-707 7番アイアンのロフト: 29度
- Epon AF-707 8番アイアンのロフト: 33度
- Epon AF-707 9番アイアンのロフト: 38度
- Epon AF-707 ピッチングウェッジのロフト: 43度
- Epon AF-707 ギャップウェッジのロフト: 48度
- Epon AF-707 サンドウェッジのロフト: 55度
純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。
メーカーのスペックページで確認したロフト (2026年11月15日)
Epon AF-707: 予想キャリー距離
ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。
| クラブ | ロフト | ゆっくりめのスイング7番アイアン 約142y | 平均的なスイング7番アイアン 約157y | 速めのスイング7番アイアン 約171y |
|---|---|---|---|---|
| 5番アイアン | 23° | 161 y | 178 y | 194 y |
| 6番アイアン | 26° | 152 y | 168 y | 183 y |
| 7番アイアン | 29° | 142 y | 157 y | 171 y |
| 8番アイアン | 33° | 132 y | 146 y | 159 y |
| 9番アイアン | 38° | 121 y | 134 y | 146 y |
| PW | 43° | 111 y | 123 y | 134 y |
キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。
Epon AF-707について
Endo forges the AF-707 in Japan from soft carbon steel, and the finish work is where the price shows up. Lines are clean, the cavity is shallow and simple, and there's no badge clutter or paint fill trying to distract you. The head shape sits between a true blade and a mid-size cavity back: shorter blade length than a game improvement iron, minimal offset, and a sole narrow enough to work the ball off tight lies. The cavity moves a modest amount of weight to the perimeter, so mishits toward the toe or heel lose less distance than they would with a musclback. That's the whole trick. There's no face insert, no tungsten story, no slot technology. Just a well-shaped forged head with weight in sensible places.
ロフト分析
Epon AF-707の7番アイアンのロフトは29°で、やや強めで、従来のロフトより少し立っています。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約154~164ヤードと見込まれます。5番アイアン(23°)と7番アイアンのロフト差は6°で、間隔は適切です。ミドルアイアンの距離差がきれいに分かれます。ピッチングウェッジのロフトは43°で、一般的な範囲で、50~52°のギャップウェッジときれいにつながります。
Epon AF-707はどんな人に向いている?
- ✓Low to mid single digit handicaps who want blade-like feel with a slightly bigger safety net.
- ✓Players who value forged feedback and turf interaction over raw distance numbers.
- ✓Anyone willing to go through a proper fitting, since Epon heads are typically sold component-style and built to spec.
- ✓Golfers moving down from a mid-size cavity who aren't quite ready for a full muscleback.
関連記事
よくある質問
Who actually makes Epon irons like the AF-707?
Epon is the in-house brand of Endo Manufacturing in Niigata, Japan. Endo has forged heads for major OEMs for decades, and Epon is where they sell their own designs under their own name. The AF-707 is forged and finished in Japan.
Is the Epon AF-707 forgiving enough for a mid handicapper?
It depends on your ball striking, not just your handicap. The cavity design helps on small misses, but the head is compact and the sweet spot is not huge. A 10 to 15 handicap who strikes it consistently can play it. A player who misses all over the face will lose distance and should look at a larger Epon model instead.
How does the AF-707 compare to a true blade?
You keep most of the feel and the compact address profile, but the shallow cavity adds noticeable stability on toe and heel strikes. Shots that a blade would punish still fly reasonably. The trade-off is a slightly thicker look than a muscleback, though it's still thin by most standards.
Where can I buy the Epon AF-707 and why is it so expensive?
Epon sells through authorized fitters and specialty golf shops rather than mass retail, and most sets are built to order with your choice of shaft. The price reflects Japanese forging, hand finishing, and low production volume. Since the AF-707 dates to 2017, the used JDM market is now the most realistic place to find a set.
What shafts pair well with the AF-707?
Because Epon heads are usually sold component-style, you can build them with almost anything. Mid-weight steel like Modus 105 or 120, or Dynamic Gold for stronger players, are common pairings. A good fitter matters more here than with an off-the-rack set, since the head is sold on precision and deserves a build to match.
Epon AF-707 アイアンは高ハンディキャップのゴルファーに向いていますか?
いいえ。Epon AF-707はボールをしっかり打てるゴルファー向けのプレーヤーズキャビティ設計です。このカテゴリーは一般にハンディキャップ0~12のゴルファーに合います。高ハンディキャップのゴルファーには、ゲームインプルーブメントモデルのほうがやさしく感じられます。
Epon AF-707の代わりになるモデル
ほかのブランドのプレーヤーズキャビティ アイアンのうち、発売年が近いモデルです。