Maltby is the house brand out of Golfworks, the clubmaking supply company Ralph Maltby built, and the TE Forged is what happens when a company that has spent decades measuring and testing other people's clubs decides to make its own. You won't find these on a rack at your local big box. They sell direct, often built to order by a clubmaker, and that changes the math on what you're getting for the money.
The TE Forged is a players cavity iron, which means it sits between a blade and a chunky game improvement club. The head is forged, the back is hollowed into a cavity to move weight to the perimeter, and the lofts run progressively through the set. In plain terms, it wants to give a decent ball striker some forgiveness without turning the iron into a shovel. The shaping is compact, the topline is on the thinner side, and there's real feedback when you catch one off center.
What sets this club apart is the honesty of the numbers. The 7-iron is 35 degrees. That's a traditional loft, not the 30 or 31 degrees a lot of "players distance" irons hide behind to inflate their yardages. You're not buying fake distance here. You're buying a forged iron that flies the distance a 35 degree 7-iron should, and you're paying a fraction of what the name brands charge for a similar head.
要点
Maltby TE Forged (2022年) はサイズをあまり大きくせずにやさしさを加えたプレーヤーズキャビティアイアンです。セット構成は3番アイアン~AWで、7番アイアンのロフトは35°です。2022年発売。希望小売価格 (MSRP) は$349です。
Maltby TE Forged アイアン: 主要スペック
- カテゴリ
- プレーヤーズキャビティ
- 目安ハンディキャップ
- 0~12
- セット構成
- 3番アイアン~AW
- 7番アイアンのロフト
- 35度
- ロフト範囲
- 22~51度
- モデル年式
- 2022
- MSRP
- $349
購入先
各ショップの検索ページを開きます。価格と在庫は各ショップのものです。
今買うべきか、待つべきか?
買うか待つかモデルチェンジ間近
このカテゴリーのブランドは約2年ごとにモデルを更新します。TE Forgedは発売から4年たっても後継モデルがまだないため、いつ新モデルが出てもおかしくありません。今のうちに値下がり価格で買うか、数週間待って後継モデルを確かめましょう。
発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。
売却・下取りに出す
見積もり発売時価格 $349 と発売4年目のモデルであることから算出(中古価格は定価の約31%を維持)。
中古市場価格
$90 - $120
個人売買、並品~極上品
下取り価格
$55 - $85
ショップの一般的な買取価格
正確な見積もりを取得
減価モデルによる概算であり、実際の査定額ではありません。実際の金額は状態・シャフト・需要により変動しますので、上記サイトで「Maltby TE Forged」を検索してご確認ください。
ロフトスペック
Maltby TE Forgedの7番アイアンのロフトは35度です。セット構成は3番アイアン~AWです。ハンディキャップ0~12のゴルファーに合います。
| クラブ | ロフト |
|---|---|
| 3i | 22° |
| 4i | 24° |
| 5i | 27° |
| 6i | 31° |
| 7i | 35° |
| 8i | 39° |
| 9i | 43° |
| PW | 47° |
| AW | 51° |
データの範囲は3i~AW (9本) です。
TE Forged クラブ別ロフト
- Maltby TE Forged 3番アイアンのロフト: 22度
- Maltby TE Forged 4番アイアンのロフト: 24度
- Maltby TE Forged 5番アイアンのロフト: 27度
- Maltby TE Forged 6番アイアンのロフト: 31度
- Maltby TE Forged 7番アイアンのロフト: 35度
- Maltby TE Forged 8番アイアンのロフト: 39度
- Maltby TE Forged 9番アイアンのロフト: 43度
- Maltby TE Forged ピッチングウェッジのロフト: 47度
- Maltby TE Forged ギャップウェッジのロフト: 51度
純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。
販売店の標準スペック表で確認したロフト (2026年11月15日)
Maltby TE Forged: 予想キャリー距離
ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。
| クラブ | ロフト | ゆっくりめのスイング7番アイアン 約128y | 平均的なスイング7番アイアン 約143y | 速めのスイング7番アイアン 約157y |
|---|---|---|---|---|
| 3番アイアン | 22° | 159 y | 178 y | 196 y |
| 4番アイアン | 24° | 151 y | 169 y | 186 y |
| 5番アイアン | 27° | 144 y | 161 y | 177 y |
| 6番アイアン | 31° | 136 y | 152 y | 167 y |
| 7番アイアン | 35° | 128 y | 143 y | 157 y |
| 8番アイアン | 39° | 119 y | 133 y | 146 y |
| 9番アイアン | 43° | 109 y | 122 y | 134 y |
| PW | 47° | 100 y | 112 y | 123 y |
キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。
テクノロジー
Maltby TE Forgedについて
The construction is straightforward and that's the point. A forged carbon steel head gives you the soft feel at impact that forged irons are known for, and the cavity back pulls mass out toward the heel and toe so mishits don't drop out of the sky. The progressive loft setup means the long irons and short irons are tuned differently through the set, so the 3 and 4 iron are a touch easier to launch while the scoring clubs stay tight and controllable. Look at the loft table and you see a clean, traditional progression: 35 degrees at the 7-iron, four degree gaps through most of the set, and a 47 degree pitching wedge. That 47 degree PW matters because it leaves room for a normal gap wedge and doesn't force you to rework your whole short game. Because Maltby sells these as components or built clubs, the shaft, grip, length, and lie are all yours to spec. That's a strength if you know your fit and a small learning curve if you've only ever bought clubs off the shelf.
ロフト分析
Maltby TE Forgedの7番アイアンのロフトは35°で、従来どおりで、クラシックなアイアンのロフト基準に沿っています。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約133~143ヤードと見込まれます。5番アイアン(27°)と7番アイアンのロフト差は8°で、間隔は広めです。ロフトの近いフェアウェイウッドやハイブリッドと距離が重なる可能性があります。ピッチングウェッジのロフトは47°で、従来どおりのロフトで、標準的な52°のギャップウェッジと自然に組み合わせられます。
Maltby TE Forgedはどんな人に向いている?
- ✓Mid handicappers who make consistent contact and want forged feel without the tour-blade punishment
- ✓Value hunters who'd rather put money into a fitting and quality shafts than into a brand name stamped on the back
- ✓Players who prefer traditional lofts and don't want a 7-iron that behaves like a 6
- ✓Anyone working with a clubmaker or comfortable buying components and having a set built to their specs
- ✓Golfers moving down from game improvement irons who want more workability but still need a little help on off-center hits
関連記事
よくある質問
Who actually makes Maltby TE Forged irons?
Maltby is the in-house brand of Golfworks, the clubmaking company founded by Ralph Maltby. The heads are forged and sold direct through Golfworks, either as raw components or as complete clubs built to your specs. There's no traditional retail middleman, which is a big reason the price is lower than comparable forged irons from the major brands.
Are the lofts on the TE Forged strong or weak?
They're traditional. The 7-iron is 35 degrees and the pitching wedge is 47 degrees, which is where players irons sat for years before the industry started jacking lofts to sell distance. You won't hit these longer than a comparable club with a stronger loft, but your gapping is honest and your PW still lofts the ball like a wedge should.
How do these compare to Mizuno or Titleist players irons?
The head shape, forged feel, and forgiveness land in the same players cavity category as something like a Mizuno JPX or a Titleist T-series. The difference is price and how you buy them. You give up the brand cachet and the in-store fitting experience, and in return you pay noticeably less for a forged head with similar performance. For a lot of golfers that's a good trade.
What handicap should be playing the TE Forged?
This is a fit for low to mid handicappers, roughly single digits up to the mid teens if you're a fairly clean ball striker. The cavity gives you some help, but the compact head and thin topline reward good contact and won't rescue a bad swing the way a wide-sole game improvement iron will.
Do I have to build these myself?
No. You can order them as complete clubs built to your length, lie, shaft, and grip by Golfworks, or buy the heads as components if you or your clubmaker want to assemble them. Buying built to spec is the easiest route and still comes in under what an off-the-rack forged set from a major brand would cost.
Maltby TE Forged アイアンは高ハンディキャップのゴルファーに向いていますか?
いいえ。Maltby TE Forgedはボールをしっかり打てるゴルファー向けのプレーヤーズキャビティ設計です。このカテゴリーは一般にハンディキャップ0~12のゴルファーに合います。高ハンディキャップのゴルファーには、ゲームインプルーブメントモデルのほうがやさしく感じられます。
Maltby TE Forgedの代わりになるモデル
ほかのブランドのプレーヤーズキャビティ アイアンのうち、発売年が近いモデルです。