The Mack Daddy 3 Milled is Roger Cleveland's wedge, and it plays like a wedge built by someone who has spent decades obsessing over how a ball comes off a face. Callaway offers it across seven lofts from 48 to 60 degrees, so you can build a full short-game setup around one model without mixing feels between your gap, sand, and lob wedges.
What sets the MD3 apart is Groove-in-Groove technology. Between the main grooves, Callaway milled a second set of micro-grooves running at a slight angle to the primary ones. The point is more contact points on the ball at impact, which means more spin, especially on those half and three-quarter shots where you are trying to check a ball up next to a tucked pin. It is not marketing fluff. You can hear and feel the ball grabbing the face.
Progressive lofts and progressive grooves mean this set is not one design stretched across seven heads. Lower lofts get narrower, deeper grooves for full-swing control. Higher lofts get wider, shallower grooves tuned for spin around the greens. If you play a 48 and a 60 out of this family, each one is optimized for the shots you actually hit with it.
Tóm lại
Callaway MD3 Milled (2015) là một cây wedge tour grind cho nhiều kiểu cú đánh quanh green. Loft từ 48° đến 60°. Ra mắt năm 2015.
Callaway MD3 Milled Wedge: Thông số chính
- Danh mục
- Tour Grind
- Handicap phù hợp
- 0 đến 10
- Khoảng loft
- 48 đến 60 độ
- Tùy chọn Loft/Grind
- 7
- Năm sản xuất
- 2015
Nơi mua
Mở trang tìm kiếm của từng nhà bán lẻ cho gậy này. Giá và tồn kho do nhà bán lẻ quyết định.
Mua ngay hay chờ đợi?
Mua hay chờSắp có mẫu mới
Các hãng trong phân khúc này thường ra mẫu mới khoảng 2 năm một lần, và MD3 Milled đã ra mắt được 11 năm mà chưa có mẫu kế nhiệm, nên mẫu mới có thể xuất hiện bất cứ lúc nào. Hãy mua ngay với giá xả hàng, hoặc chờ vài tuần để xem mẫu nào thay thế.
Dựa trên thời điểm ra mắt và chu kỳ ra mẫu mới thường thấy của dòng này, không phải báo giá trực tiếp.
Các phiên bản có sẵn
| Loft | Bounce | Grind | Lớp hoàn thiện |
|---|---|---|---|
| 48° | 10° | S | Chrome |
| 50° | 10° | S | Chrome |
| 52° | 10° | S | Chrome |
| 54° | 10° | S | Chrome |
| 56° | 10° | S | Chrome |
| 58° | 10° | S | Chrome |
| 60° | 10° | S | Chrome |
Loft và Bounce là giá trị danh nghĩa. Thông số thực tế có thể khác.
Công nghệ
Giới thiệu Callaway MD3 Milled
The MD3 Milled is forged and then CNC milled on the face and grooves, which is why the shorthand name includes Milled. Milling the face gives Callaway tight tolerances groove to groove, and the forged carbon steel head delivers the soft, dense feel that better players want to hear on a delicate flop or a firm spinner. This is a players wedge in look and feel, with a compact head, thin topline, and minimal offset. Grind options were the other half of the story. Depending on loft you could get an S grind for versatility, a C grind with heel and toe relief for players who open the face and manipulate the club, or a W grind with more bounce for softer conditions and steeper attack angles. Matching the grind to your turf and your swing is the difference between a wedge that digs and one that glides.
Ai nên dùng Callaway MD3 Milled?
- ✓Mid to low handicappers who take a full or partial swing and want the ball to check on the second bounce.
- ✓Players who want a matched set of wedges from gap through lob rather than a single hero club.
- ✓Anyone who opens the face and works shots around the green and needs a grind that lets the club slide instead of dig.
- ✓Golfers who prioritize spin and feel from forged carbon steel over the durability of a plated cast wedge.
Bài viết liên quan
- Bạn nên mang theo bao nhiêu wedge?Hướng dẫn mua
- Wedge tốt nhất năm 2026: giải thích về bounce, grind và loftHướng dẫn mua
Câu hỏi thường gặp
What is Groove-in-Groove technology on the MD3 Milled?
It is a second set of micro-grooves milled between the main grooves, angled slightly against them. The extra edges create more contact with the ball at impact, which adds spin on partial and open-face shots where you need the ball to stop quickly.
What grind should I get in the Callaway MD3 Milled?
It depends on your turf and technique. The S grind is the versatile all-rounder for neutral conditions. The C grind has heel and toe relief and suits players who open the face and hit a lot of finesse shots. The W grind carries more bounce and works better in soft turf and bunkers or if you have a steep angle of attack.
Is the MD3 Milled forged or cast?
It is forged from carbon steel with a milled face and grooves. The forging gives it the soft feel better players look for, and the milling keeps the grooves consistent for predictable spin.
Which lofts does the MD3 Milled come in and how should I set up my wedges?
It runs from 48 to 60 degrees in the 48, 50, 52, 54, 56, 58, and 60 options. Most players carry three or four wedges spaced about four degrees apart, for example a 50, 54, and 58, so you cover your gaps without leaving an awkward yardage between clubs.
Is the MD3 Milled a good wedge for higher handicappers?
It can be, but it is built for players who make consistent contact. This is a compact players wedge with a thin topline and less bounce in the lower-loft grinds. If you tend to hit it thin or fat, a wider-soled game-improvement wedge will be more forgiving, though you give up some of the feel and spin the MD3 delivers.
Wedge Callaway MD3 Milled có hợp với người chơi handicap cao không?
Không. Callaway MD3 Milled là thiết kế Tour Grind dành cho người đánh bóng tốt. Dòng này thường hợp với handicap 0 đến 10. Người chơi handicap cao sẽ thấy mẫu Game Improvement dễ đánh hơn.
Lựa chọn thay thế cho Callaway MD3 Milled
Các mẫu Tour Grind Wedge khác từ những thương hiệu khác, có năm ra mắt gần nhất.
Thêm gậy wedge Callaway
Tìm Loft phù hợp cho túi gậy của bạn
Dùng công cụ tìm khoảng cách để xem tổ hợp Loft nào hợp với bộ gậy hiện tại của bạn.
Mở công cụ tìm khoảng cách →