Axis1 Rose B Putter

Blade Putter

Axis1 was built around one stubborn idea: put the center of gravity directly behind the middle of the face. Most putters can't, because the hosel and shaft hang off the heel and drag the balance point over with them. That offset is why a normal blade wants to twist open when you catch a putt toward the toe or heel. Axis1 cancels it out with a dense counterweight sunk into the heel, so the CG lands on the sweet spot instead of beside it. The Rose B is the blade that carries that design, and it's the one Justin Rose put his name on.

The B is for blade, and this is the small, honest shape a good putter likes to see at address. Compact head, plumber's neck, a flat top with nothing printed on it. The counterweight gives the heel a slightly unusual look from above, but everything else is classic. This is a player's blade first and a piece of engineering second, and the two things are working on the same problem: keeping the face square without you having to steer it there.

The spec that decides the fit is the toe hang, and this one surprises people. You'd expect an Axis1 to be face-balanced given the balance story, but the Rose B has full toe hang. Rest the shaft across a finger and the toe drops straight down, which tells you the face opens and closes a lot through the stroke. That's built for a golfer with a real arc. Match it to an arcing release and the head does what it already wants to do. Bring a straight, square stroke to it and you'll feel the face closing on you, and a different putter fits you better.

Thiết kế

The counterweight is the whole story. Axis1 sets a heavy slug in the heel to offset the mass of the hosel and shaft, which drags the center of gravity back onto the vertical center of the face rather than off toward the heel. In practice the head resists twisting on a mishit, so a putt caught slightly off center holds its line closer to a pure strike than a normal blade this size would manage. You feel it as a putter that stays square through impact without you fighting to hold it there. Around that one trick, the design is deliberately plain. The topline is clean with no sightline and the face has no insert, so there's nothing between your eye and the ball but the shape of the head. The plumber's neck sets the full toe hang, tuned for an arc stroke, and the milled feel gives you firm, honest feedback off the face. It's a shape that has barely changed in decades with one modern idea hidden in the heel doing the real work.

Who It's For

• Your stroke has a pronounced arc and you want a blade whose full toe hang works with that release instead of against it.
• You aim by feel and the leading edge and don't want a sightline cluttering the top of the head.
• Off-center putts cost you strokes and the balanced CG gives you twist resistance a normal blade this size can't.
• You already putt well and trust your eye enough that no alignment aid is a feature, not a problem.
• The Justin Rose connection and the engineering behind the counterweight matter to you as much as the roll does.

Công nghệ

About Axis1

Axis1 brings a distinctive approach to putter design, focusing on quality materials, precision manufacturing, and performance-driven engineering.

Thông số kỹ thuật

Câu hỏi thường gặp

What actually makes an Axis1 putter different from a regular blade?

A counterweight in the heel offsets the hosel and shaft, which pulls the center of gravity onto the middle of the face. On a standard blade the CG sits toward the heel, so the face twists open on off-center hits. The Rose B fights that twist and stays squarer through impact, so mishits hold their line better than the small head would suggest.

Is the Rose B face-balanced or toe hang?

It has full toe hang. Balance the shaft on a finger and the toe points straight down, which means the face opens and closes a lot during the stroke. That fits a golfer with a strong arc. If your stroke runs straight back and through, the toe hang will feel like it's pulling the face closed and a face-balanced putter suits you better.

Does the Rose B have an alignment line?

No. The topline is clean with no sightline. Axis1 leaves it off so there's nothing between your eye and the ball but the head itself. If you lean on a line to aim, that absence will bother you. If you aim by feel and the leading edge, you won't miss it.

Is this the putter Justin Rose uses?

Rose put his name on the Axis1 line and the Rose models carry his endorsement, which is a big part of how the brand reached a wider audience. He was drawn to Axis1 for the same reason a lot of players are, the balanced CG that keeps the face square through the stroke. Tour setups vary, so treat it as his signature design rather than a guarantee of his exact gamer.

Is a blade this small forgiving enough for me?

It's more forgiving than its size suggests because of the balanced CG, but it's still a blade. The counterweight helps the head resist twisting on mishits, so you get protection a normal blade this footprint wouldn't give you. You don't get mallet-level stability. If you miss the center often and want maximum help, a larger head serves you better.

Alternatives to the Axis1 Rose B

Other blade putter models from different brands, closest to its model year.

More from Axis1