The Miura TC-202 is a players cavity iron from a company that grinds its heads by hand in Himeji, Japan. TC stands for tour cavity, and that tells you the intent. This is a forged iron aimed at good players who want a hollowed-back head for a little forgiveness without giving up the compact look and soft feel that Miura built its name on. If you already flush your irons and you've been curious about what the fuss over Japanese forgings is, this is the model people point you toward.
The 7-iron sits at 31.5 degrees, which is a traditional loft. Miura didn't strengthen the lofts to chase distance the way most brands have, so your gapping stays sensible and your long irons still launch and land like long irons should. You trade a few yards against a strong-lofted game improvement set, but you gain trajectory control and predictable stopping power into greens.
This iron won't hide a bad swing. The cavity adds stability behind the sweet spot, but the head is small, the topline is thin, and there isn't much offset to bail you out. Bring consistent contact and it rewards you with feedback and feel that mass-produced cast irons can't touch. Play it because you want to feel the ball come off the face, not because you need help finding the middle.
Tóm lại
The Miura TC-202 (2025) is a players cavity that adds forgiveness without much extra size. The set runs 4-iron to 48-iron with a 31.5° 7-iron. It carries a $2,295 MSRP.
Miura TC-202 Gậy sắt: Thông số chính
- Danh mục
- Players Cavity
- Cấu thành bộ gậy
- 4-iron to 48-iron
- 7-iron loft
- 31.5 degrees
- Khoảng loft
- 22 to 45 degrees
- Năm sản xuất
- 2025
- MSRP
- $2295
Mua ngay hay chờ đợi?
Thời điểm tốt để muaValue sweet spot
About a year old, so the first real discounts have landed while a replacement is still 6 to 18 months out. Strong value without feeling dated.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Bán hoặc đổi cũ lấy mới
Ước tínhModeled from the $2,295 original MSRP and a 1-year-old release (about 55% of MSRP retained used).
Giá trị thị trường đã qua sử dụng
$1,075 - $1,415
Private sale, fair to like-new
Giá trị đổi cũ lấy mới
$645 - $990
Mức giá cửa hàng thường trả
Nhận báo giá chính xác
Estimate only, from a depreciation model, not a live quote. Search “Miura TC-202” on the sites above for the real number, which varies with condition, shaft, and demand.
Miura TC-202: the iron lineage
The TC-202 is the 2nd of 2 generations Miura has released in this line, from the TC-201 (2022) to the TC-202 (2025). It followed the TC-201 (2022) and came in up $200. It is the newest generation in the line.
- 2025TC-202You are here· $2,295 MSRP
Thông số Loft
| 4i | 5i | 6i | 7i | 8i | 9i | 48i |
|---|---|---|---|---|---|---|
| 22.0° | 25.0° | 28.0° | 31.5° | 35.5° | 40.0° | 45.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Miura TC-202: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Gậy | Loft | Moderate swing~136y 7-iron | Average swing~151y 7-iron | Faster swing~165y 7-iron |
|---|---|---|---|---|
| 4-iron | 22° | 161 y | 179 y | 196 y |
| 5-iron | 25° | 154 y | 171 y | 187 y |
| 6-iron | 28° | 145 y | 161 y | 176 y |
| 7-iron | 31.5° | 136 y | 151 y | 165 y |
| 8-iron | 35.5° | 127 y | 141 y | 154 y |
| 9-iron | 40° | 116 y | 129 y | 141 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
About the Miura TC-202
Miura forges the TC-202 from soft carbon steel and finishes each head by hand, which is where the brand's reputation for feel comes from. The cavity is muscle-backed enough to keep the mass low and behind the center of the face, so mishits toward the toe or low on the face hold their line better than they would on a pure blade. The topline is thin, the sole is a moderate width that works through turf without digging, and the offset is minimal so the face sits square to a better player's eye. The loft progression runs from 22 degrees at the 4-iron down to 45 degrees at the pitching wedge, with even four-degree gaps through most of the set. That spacing keeps your yardages clean and avoids the double gaps you get when a maker jacks the mid-iron lofts. There's no speed slot, no face insert, no marketing gimmick. It's a forged head shaped to do one thing well, which is give a ball striker a workable, soft-feeling iron with just enough cavity to take the edge off.
Phân tích Loft
The Miura TC-202's 7-iron is lofted at 31.5° - near-traditional - close to the classic 32-34° benchmark. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 145-155 yards. The 5-iron (25°) to 7-iron gap of 6.5° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids.
Who Should Play the Miura TC-202?
- ✓Low handicappers and better mid handicappers who make consistent center contact and want feedback on the ones they miss.
- ✓Players coming off a blade who want a touch more stability without changing the compact shape or thin topline they already trust.
- ✓Anyone who prefers traditional lofts and predictable gapping over strong-lofted distance numbers.
- ✓Golfers who value soft forged feel and are willing to pay a premium for hand-ground Japanese irons.
- ✓Ball strikers who like to work shots and control trajectory into greens rather than launch everything high and hope it stops.
Câu hỏi thường gặp
Are Miura TC-202 irons good for high handicappers?
Not really. The cavity adds some stability, but the head is small, the topline is thin, and the offset is minimal, so it demands consistent contact. A high handicapper will get more out of a wider-soled game improvement iron. The TC-202 is built for players who already find the middle of the face most of the time.
What is the 7-iron loft on the Miura TC-202?
The 7-iron is 31.5 degrees, which is a traditional loft. Miura didn't strengthen the lofts to inflate distance, so you'll see slightly shorter carry numbers than a strong-lofted set, but cleaner gapping and better stopping power into greens.
How does the Miura TC-202 compare to a blade like the Miura MB?
The TC-202 has a cavity behind the face that moves weight low and toward the perimeter, so it forgives toe and low-face misses better than a straight muscle back. A blade like the MB gives you the purest feel and most workability but punishes mishits harder. The TC-202 is the middle ground for a good player who wants a little help without the game improvement look.
Why are Miura irons so expensive?
Miura forges the heads from soft carbon steel and grinds and finishes them by hand in Japan, rather than casting them in volume. That process and the tighter tolerances are what you pay for, and it's the reason the feel is often described as softer than mass-produced irons.
Is the Miura TC-202 a forged iron?
Yes. It's forged from soft carbon steel and hand-finished, which is the source of the soft impact feel and the crisp feedback on mishits. That forging process is central to why Miura irons feel the way they do.
Đánh giá & Nhận xét
No ratings yet. Sign in to rate this club.
Alternatives to the Miura TC-202
Other players cavity iron models from different brands, closest to its model year.
More Miura Gậy sắt
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.