The Miura MC-502 is a players cavity iron for golfers who want a little help without giving up the look and feel of a blade. MC stands for muscle cavity, and that's exactly what you get here: a compact head with a small pocket carved out behind the hitting area to move a bit of weight to the perimeter. It's forged from soft carbon steel at Miura's shop in Himeji, Japan, which is the whole reason people chase this brand in the first place.
What sets the MC-502 apart from Miura's straight blades is that it forgives the occasional miss off the toe or low on the face without turning into a game-improvement club. The topline is thin, the offset is minimal, and the sole is narrow. Address it and it looks like a players iron should. The cavity is doing quiet work behind the scenes, not shouting about it.
Lofts are on the moderately traditional side. The 7-iron sits at 33 degrees, which is stronger than an old-school blade but nowhere near the jacked-up numbers you see on distance irons pushing 28 or 29. That means your gapping stays sane and your wedges still fit, and the ball flies at a height a good player expects rather than a flat, hot launch you have to fight.
Tóm lại
Miura MC-502 (2023) là một bộ gậy sắt players cavity tăng độ dễ đánh mà không làm đầu gậy to hơn nhiều. Bộ gậy gồm sắt số 3 đến PW, Loft gậy sắt số 7 là 33°. Ra mắt năm 2023.
Miura MC-502 Gậy sắt: Thông số chính
- Danh mục
- Players Cavity
- Handicap phù hợp
- 0 đến 12
- Cấu thành bộ gậy
- sắt số 3 đến PW
- Loft gậy sắt số 7
- 33 độ
- Khoảng loft
- 21 đến 46 độ
- Năm sản xuất
- 2023
Nơi mua
Mở trang tìm kiếm của từng nhà bán lẻ cho gậy này. Giá và tồn kho do nhà bán lẻ quyết định.
Mua ngay hay chờ đợi?
Mua hay chờSắp có mẫu mới
Các hãng trong phân khúc này thường ra mẫu mới khoảng 2 năm một lần, và MC-502 đã ra mắt được 3 năm mà chưa có mẫu kế nhiệm, nên mẫu mới có thể xuất hiện bất cứ lúc nào. Hãy mua ngay với giá xả hàng, hoặc chờ vài tuần để xem mẫu nào thay thế.
Dựa trên thời điểm ra mắt và chu kỳ ra mẫu mới thường thấy của dòng này, không phải báo giá trực tiếp.
Miura MC-502: các thế hệ gậy sắt
MC-502 là thế hệ thứ 2 trong 2 thế hệ mà Miura đã ra mắt ở dòng này, từ MC-501 (2018) đến MC-502 (2023). Mẫu này ra sau MC-501 (2018). Đây là thế hệ mới nhất của dòng.
- 2023MC-502Mẫu đang xem
Thông số Loft
Gậy sắt số 7 của Miura MC-502 có Loft 33 độ, và bộ gậy gồm sắt số 3 đến PW. Bộ gậy hợp với người chơi có handicap 0 đến 12.
| Gậy | Loft |
|---|---|
| 3i | 21° |
| 4i | 23° |
| 5i | 26° |
| 6i | 29° |
| 7i | 33° |
| 8i | 37° |
| 9i | 41° |
| PW | 46° |
Dữ liệu gồm 3i đến PW (8 gậy). Nếu Miura bán thêm gậy cho bộ này (ví dụ gap wedge), chúng tôi chưa có dữ liệu về các gậy đó.
Loft từng gậy MC-502
- Loft sắt số 3 của Miura MC-502: 21 độ
- Loft sắt số 4 của Miura MC-502: 23 độ
- Loft sắt số 5 của Miura MC-502: 26 độ
- Loft sắt số 6 của Miura MC-502: 29 độ
- Loft sắt số 7 của Miura MC-502: 33 độ
- Loft sắt số 8 của Miura MC-502: 37 độ
- Loft sắt số 9 của Miura MC-502: 41 độ
- Loft pitching wedge của Miura MC-502: 46 độ
Cán thép tiêu chuẩn. Loft là giá trị gần đúng và có thể chênh lệch theo dung sai sản xuất.
Loft đã đối chiếu với trang thông số của nhà sản xuất (15 thg 11, 2026)
Miura MC-502: khoảng cách carry dự kiến
Khoảng cách carry thông thường theo tốc độ swing, đã điều chỉnh theo Loft thực tế của bộ gậy này. Con số của bạn sẽ khác tùy điểm tiếp bóng, cán gậy và điều kiện sân.
| Gậy | Loft | Swing vừaSắt số 7 ~132y | Swing trung bìnhSắt số 7 ~147y | Swing nhanhSắt số 7 ~161y |
|---|---|---|---|---|
| Sắt số 3 | 21° | 165 y | 184 y | 202 y |
| Sắt số 4 | 23° | 157 y | 175 y | 192 y |
| Sắt số 5 | 26° | 150 y | 167 y | 183 y |
| Sắt số 6 | 29° | 142 y | 158 y | 173 y |
| Sắt số 7 | 33° | 132 y | 147 y | 161 y |
| Sắt số 8 | 37° | 123 y | 137 y | 150 y |
| Sắt số 9 | 41° | 113 y | 126 y | 138 y |
| PW | 46° | 104 y | 116 y | 127 y |
Khoảng cách carry được tính từ số liệu chuẩn dựa trên TrackMan, quy đổi theo Loft của từng gậy, không phải đo trực tiếp với mẫu này.
Giới thiệu Miura MC-502
The head is compact from every angle. Short blade length, thin topline, and a sole that's narrow enough to work out of tight lies but still slides through turf better than a pure blade. The muscle cavity design keeps mass low and behind the center of the face, so strikes stay stable and the sweet spot feels a touch more generous than the small footprint suggests. Soft carbon steel forging gives the MC-502 the dense, buttery impact feel Miura is known for. You feel exactly where you hit it, which is the point of an iron in this category. The finish is clean and understated, and the minimal offset means the leading edge sits close to square, the way better players tend to prefer.
Phân tích Loft
Gậy sắt số 7 của Miura MC-502 có Loft 33°, mức truyền thống, đúng với chuẩn Loft gậy sắt cổ điển. Với người chơi có tốc độ swing 85 đến 95 mph, khoảng carry của gậy sắt số 7 ước tính khoảng 140 đến 150 yard. Chênh lệch Loft giữa sắt số 5 (26°) và sắt số 7 là 7°, hợp lý, có thể trùng khoảng cách với gậy fairway wood hoặc hybrid có Loft gần nhau. Pitching wedge có Loft 46°, là Loft truyền thống, ghép tự nhiên với gap wedge 52° tiêu chuẩn.
Ai nên dùng Miura MC-502?
- ✓Single-digit and low-teen handicaps who strike it well but want slightly more room for error than a straight blade gives
- ✓Players moving down from a game-improvement iron who are ready for a smaller head and thinner topline
- ✓Golfers who prioritize feel and feedback and are willing to pay for Japanese forging quality
- ✓Anyone who wants traditional-ish lofts and predictable gapping rather than jacked-up distance numbers
- ✓Ball-strikers who like to shape shots and want an iron that reports honestly on where they caught it
Bài viết liên quan
Câu hỏi thường gặp
Is the Miura MC-502 a blade or a cavity back?
It's a players cavity, which sits between the two. MC stands for muscle cavity, so there's a small pocket behind the face for a bit of forgiveness, but the head is compact with a thin topline and minimal offset like a blade. It looks and feels like a players iron, not a game-improvement club.
How forgiving is the MC-502 compared to a Miura blade?
More forgiving, but only by a margin. The muscle cavity moves some weight to the perimeter, so slightly off-center strikes hold their line and lose a little less distance than they would off a pure blade. If you need real help on mishits, this still isn't the iron for you. It rewards good contact.
What are the lofts on the MC-502?
They run from 21 degrees in the 3-iron to 46 degrees in the pitching wedge, with the 7-iron at 33 degrees. That's moderately traditional, stronger than a classic blade but well short of distance-iron territory, so your gapping and wedge setup stay clean.
Why is the MC-502 so expensive?
You're paying for Miura's forging. The heads are forged from soft carbon steel in Himeji, Japan, with a level of quality control that shows up in the feel at impact. It's a boutique product, not a mass-market iron, and the price reflects the craftsmanship rather than any high-tech gimmick.
Who should choose the MC-502 over a straight players blade?
Golfers who strike it well but want a small safety net on toe and thin strikes without moving to a bigger head. If you love the look of a blade at address but occasionally get punished more than you'd like, the muscle cavity gives you a touch of stability while keeping the compact profile.
Gậy sắt Miura MC-502 có hợp với người chơi handicap cao không?
Không. Miura MC-502 là thiết kế Players Cavity dành cho người đánh bóng tốt. Dòng này thường hợp với handicap 0 đến 12. Người chơi handicap cao sẽ thấy mẫu Game Improvement dễ đánh hơn.
Lựa chọn thay thế cho Miura MC-502
Các mẫu Players Cavity Gậy sắt khác từ những thương hiệu khác, có năm ra mắt gần nhất.
Thêm gậy sắt Miura
Xem bộ gậy sắt này có hợp với bạn không
Dùng làm bộ gậy gốc trong công cụ gợi ý, hoặc so sánh song song với một bộ khác.