The TR20 P is the cavity back in Honma's 2020 Tour Release lineup, sitting between the TR20 V blades and the more forgiving models. Honma built this one for golfers who want a compact, forged iron that still gives back a little when you miss the center. It is a players cavity in the truest sense. Clean topline, thin sole, minimal offset, but with enough perimeter weight to keep a slight mishit from falling out of the sky.
Honma forges these from soft carbon steel, and you feel it at impact. The strike is soft and quiet, the kind of feedback that tells you exactly where the ball came off the face. That is the whole point of an iron like this. It does not hide your misses, but it does not punish them as harshly as a blade would either.
The 7-iron sits at 32 degrees, which is on the traditional side for modern irons. You are not getting the jacked-up lofts and distance tricks of a game improvement set here. What you get is predictable gapping, workable trajectories, and a set that rewards a repeatable swing.
Tóm lại
The Honma TR20 P (2020) is a players cavity that adds forgiveness without much extra size. The set runs 4-iron to PW with a 32° 7-iron. It carries a $1,499 MSRP.
Honma TR20 P Gậy sắt: Thông số chính
- Danh mục
- Players Cavity
- Cấu thành bộ gậy
- 4-iron to PW
- 7-iron loft
- 32 degrees
- Khoảng loft
- 22 to 45 degrees
- Năm sản xuất
- 2020
- MSRP
- $1499
Mua ngay hay chờ đợi?
Mua hay chờRefresh due soon
Brands in this category update about every 2 years, and the TR20 P is 6 years old with no successor yet, so a new model could land any time. Grab it at clearance pricing now, or wait a few weeks to see what replaces it.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Bán hoặc đổi cũ lấy mới
Ước tínhModeled from the $1,499 original MSRP and a 6-year-old release (about 20% of MSRP retained used).
Giá trị thị trường đã qua sử dụng
$255 - $335
Private sale, fair to like-new
Giá trị đổi cũ lấy mới
$155 - $235
Mức giá cửa hàng thường trả
Nhận báo giá chính xác
Estimate only, from a depreciation model, not a live quote. Search “Honma TR20 P” on the sites above for the real number, which varies with condition, shaft, and demand.
Thông số Loft
| 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|
| 22.0° | 25.0° | 28.0° | 32.0° | 36.0° | 40.0° | 45.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Honma TR20 P: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Gậy | Loft | Moderate swing~135y 7-iron | Average swing~150y 7-iron | Faster swing~164y 7-iron |
|---|---|---|---|---|
| 4-iron | 22° | 160 y | 178 y | 195 y |
| 5-iron | 25° | 152 y | 169 y | 185 y |
| 6-iron | 28° | 144 y | 160 y | 175 y |
| 7-iron | 32° | 135 y | 150 y | 164 y |
| 8-iron | 36° | 125 y | 139 y | 152 y |
| 9-iron | 40° | 115 y | 128 y | 140 y |
| PW | 45° | 106 y | 118 y | 129 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
Công nghệ
About the Honma TR20 P
The cavity is modest, not the deep undercut you see in distance irons. Honma uses progressive lofts through the set with a slightly thicker sole in the long irons for a bit more launch and forgiveness, then tightens things up as you move into the scoring clubs. Offset is minimal and stays consistent enough that the set looks like a set at address, not a mismatched collection. Everything about the shaping is aimed at a better ball striker. The topline is thin, the sole is narrow, and the overall footprint is compact. This is a forged players cavity that looks the part sitting behind the ball, and it plays that way too.
Phân tích Loft
The Honma TR20 P's 7-iron is lofted at 32° - near-traditional - close to the classic 32-34° benchmark. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 143-153 yards. The 5-iron (25°) to 7-iron gap of 7° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 45° provides a conventional loft window that pairs cleanly with a 50-52° gap wedge.
Who Should Play the Honma TR20 P?
- ✓Mid to low handicappers who catch the center often enough to want feedback, not a trampoline face.
- ✓Players moving down from a game improvement iron who want a cleaner look but are not ready for full blades.
- ✓Golfers who value soft forged feel and predictable, traditional lofts over max distance.
- ✓Anyone who wants to shape shots and control trajectory rather than launch everything high and straight.
Câu hỏi thường gặp
Is the Honma TR20 P a blade or a cavity back?
It is a cavity back, specifically a players cavity. It has a small perimeter-weighted cavity that adds a bit of forgiveness over the TR20 V blade in the same lineup, but the shape stays compact with a thin topline and minimal offset. Think of it as a forgiving option for a good ball striker, not a game improvement iron.
What handicap is the TR20 P good for?
It fits best from about a 5 to 15 handicap. Better players can use it as a forgiving alternative to blades, and improving mid handicappers can grow into it. If you struggle to find the center consistently, a wider-soled game improvement iron would serve you better.
Are the lofts strong or traditional on the TR20 P?
They lean traditional. The 7-iron is 32 degrees, which is weaker than most distance irons that push into the 28 to 30 range. You will not get the extra ball speed and distance those sets advertise, but you get tighter, more predictable yardage gaps and less of the ballooning that comes with strong lofts and light heads.
How does the TR20 P feel at impact?
Soft and solid. Honma forges the head from soft carbon steel, and pured shots come off quiet with a lot of feedback. You will feel exactly where you struck it on the face, which is what you want from a players iron. Mishits still give you honest information rather than masking the miss.
How does the TR20 P compare to the TR20 V?
The V is a true muscleback blade for the best ball strikers. The P is the cavity back version, so it carries a little more perimeter weighting and forgiveness while keeping a similar compact look. If you want maximum workability and can handle a blade, go V. If you want most of that look with a touch more help on off-center hits, the P is the smarter pick.
Đánh giá & Nhận xét
No ratings yet. Sign in to rate this club.
Alternatives to the Honma TR20 P
Other players cavity iron models from different brands, closest to its model year.
More Honma Gậy sắt
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.