The AP2 716 was Titleist's answer for the better player who wants some help without giving up looks or feel. It's a forged players cavity iron, which means a compact head and thin topline up top, but with just enough cavity behind the face to keep off-center hits from falling apart. Sit it down behind the ball and it looks like a blade. Hit it thin on the toe and it behaves a little better than a blade would.
What sets this set apart is the tungsten. Titleist co-forged high-density tungsten into the toe and heel of the long irons, which pushes the center of gravity where it needs to be and bumps up the moment of inertia in the clubs that need it most. Your 3, 4, and 5 iron get real help getting the ball up and holding a line. The short irons stay compact and workable, the way a good player wants them.
This was one of the most played irons on tour for a reason. It's not the longest iron in its class and it doesn't try to be. The 34 degree 7-iron loft is honest, and the ball flight is what you'd expect from a forged players iron, controlled and predictable rather than launched into orbit.
简而言之
Titleist AP2 716 (2016) 是一款在不明显加大尺寸的前提下增加容错性的球员凹背铁杆。套杆为3号铁至AW,7号铁杆面倾角为 34°。2016年发布。建议零售价 (MSRP) 为 $1,099。
Titleist AP2 716 铁杆: 关键参数
- 类别
- 选手腔背
- 适合差点范围
- 0 至 12
- 套装组成
- 3号铁至AW
- 7号铁杆面倾角
- 34 度
- 杆面倾角范围
- 21 至 50 度
- 型号年份
- 2016
- MSRP
- $1099
购买渠道
点击将打开各零售商的搜索页面。价格与库存以零售商为准。
卖出或以旧换新
预估价根据 $1,099 的原始建议零售价和发布 10 年的发布推算(二手价约保留原价的 17%)。
二手市场价
$160 - $210
个人交易,良好至近全新
以旧换新价
$95 - $145
球具店通常的收购价
获取精确报价
仅为折旧模型推算,并非实时报价。实际金额会随成色、杆身和需求变化,请在上述网站搜索“Titleist AP2 716”查看真实价格。
杆面倾角参数
Titleist AP2 716 的7号铁杆面倾角为 34 度。套杆为3号铁至AW。适合差点 0 至 12 的球手。
| 球杆 | 杆面倾角 |
|---|---|
| 3i | 21° |
| 4i | 24° |
| 5i | 27° |
| 6i | 30° |
| 7i | 34° |
| 8i | 38° |
| 9i | 42° |
| PW | 46° |
| AW | 50° |
数据涵盖 3i 至 AW (共 9 支)。
AP2 716 各号杆面倾角
- Titleist AP2 716 3号铁杆面倾角: 21 度
- Titleist AP2 716 4号铁杆面倾角: 24 度
- Titleist AP2 716 5号铁杆面倾角: 27 度
- Titleist AP2 716 6号铁杆面倾角: 30 度
- Titleist AP2 716 7号铁杆面倾角: 34 度
- Titleist AP2 716 8号铁杆面倾角: 38 度
- Titleist AP2 716 9号铁杆面倾角: 42 度
- Titleist AP2 716 劈起杆杆面倾角: 46 度
- Titleist AP2 716 间隙挖起杆杆面倾角: 50 度
原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。
已与零售商标准规格表核对的杆面倾角 (2026年11月15日)
Titleist AP2 716: 预计飞行距离
按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。
| 球杆 | 杆面倾角 | 中等挥速7号铁约 130y | 平均挥速7号铁约 145y | 较快挥速7号铁约 159y |
|---|---|---|---|---|
| 3号铁 | 21° | 162 y | 181 y | 199 y |
| 4号铁 | 24° | 154 y | 172 y | 189 y |
| 5号铁 | 27° | 147 y | 164 y | 180 y |
| 6号铁 | 30° | 139 y | 155 y | 170 y |
| 7号铁 | 34° | 130 y | 145 y | 159 y |
| 8号铁 | 38° | 121 y | 135 y | 148 y |
| 9号铁 | 42° | 111 y | 124 y | 136 y |
| PW | 46° | 102 y | 114 y | 125 y |
飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。
技术
关于 Titleist AP2 716
The head is forged from 1025 carbon steel, and the tungsten weighting is co-forged rather than glued or screwed in, so the whole thing feels like one solid piece at impact. Titleist ran progressive lofts and progressive CG through the set, so the long irons are built for launch and forgiveness while the scoring clubs are built for control. The blade length, topline thickness, and offset all shrink as you move down the set. Sole width is on the thinner side and the offset is minimal, which is what you want if you like to shape shots and take a shallow divot. This is not a chunky, dig-resistant sole. It rewards a decent strike and a repeatable low point, and it lets you work the ball both directions without fighting the club.
杆面倾角分析
Titleist AP2 716 的7号铁杆面倾角为 34°,属于传统倾角,符合经典铁杆倾角标准。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 136 至 146 码。5号铁 (27°) 与7号铁之间相差 7°,间隔合理,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 46°,属于传统倾角,自然搭配标准的 52° 间隙挖起杆。
Titleist AP2 716 适合哪些球手?
- ✓Single-digit and low-teens handicaps who want a forged players iron with a small safety net in the long irons.
- ✓Ball strikers who care about how an iron looks at address and want a thin topline and minimal offset.
- ✓Players moving out of blades who still want to shape shots but would like the 3 and 4 iron to be more playable.
- ✓Anyone who values feel and control over raw distance and doesn't need jacked-up lofts to hit greens.
相关阅读
常见问题
Is the AP2 716 a players iron or a game improvement iron?
It's a players cavity iron, which sits between a blade and a game improvement club. The head is compact with a thin topline and minimal offset like a players iron, but the cavity and tungsten weighting give you more forgiveness than a true blade. It's built for better players, not high handicappers looking for maximum help.
What loft is the AP2 716 7-iron?
The 7-iron is 34 degrees, which is a traditional players iron loft. It runs about two to four degrees weaker than the strong-lofted game improvement irons from the same era, so you get a natural, controlled ball flight instead of distance from delofting.
Why does the AP2 716 have tungsten in it?
Titleist co-forged high-density tungsten into the toe and heel of the long irons, from the 3-iron through the 7-iron. It lets them position the center of gravity low and raise the moment of inertia in the clubs that are hardest to hit, so your long irons launch higher and stay more stable on off-center strikes without changing the compact shape.
How does the AP2 716 compare to the AP2 714?
The 716 kept the same players cavity concept but added more high-density tungsten, which improved long iron forgiveness and CG placement. Feel and sound got a small refinement too. If you liked the 714, the 716 is a familiar shape with a bit more help in the long irons.
Is the AP2 716 forgiving enough for a mid handicapper?
It can work for a mid handicapper who strikes the ball well, but it's not a set-and-forget forgiving iron. The sole is thin, the offset is minimal, and it rewards a clean strike. If you fight fat and thin shots, a wider-soled game improvement iron will treat you better.
Titleist AP2 716 铁杆适合高差点球手吗?
不太适合。Titleist AP2 716 是面向击球稳定球手的选手腔背设计。这一类别通常适合差点 0 至 12 的球手。高差点球手会觉得进阶型款式更宽容。
Titleist AP2 716 的替代选择
其他品牌的选手腔背 铁杆型号,按发布年份最接近排列。