跳到主要内容

Sub 70

Sub 70 669 TC 铁杆

选手腔背2025

The 669 TC sits in the middle of Sub 70's iron lineup, and that position tells you most of what you need to know. It's a forged players cavity, a step more compact than the standard 669 and a good bit more forgiving than the 699 Pro blade. If you want the look and feel of a better-player iron without committing to a full muscleback, this is the club Sub 70 built for you.

Sub 70 sells direct to the golfer, so the 669 TC costs a fraction of what a comparable forged iron runs from the big brands. That's the whole pitch. You get soft 1025 carbon steel forging, a clean compact head, and a cavity that adds a little help on strikes that miss the center. The savings come from cutting out the pro shop markup, not from cutting corners on the head.

This is an iron for the player who already strikes it fairly well and wants to keep improving. It rewards a good swing and lets you work the ball. It won't rescue a chunky miss the way a game-improvement iron will, and it isn't trying to.

简而言之

Sub 70 669 TC (2025) 是一款在不明显加大尺寸的前提下增加容错性的球员凹背铁杆。套杆为4号铁至PW,7号铁杆面倾角为 32°。2025年发布。

Sub 70 669 TC 铁杆: 关键参数

类别
选手腔背
适合差点范围
0 至 12
套装组成
4号铁至PW
7号铁杆面倾角
32 度
杆面倾角范围
22 至 45 度
型号年份
2025

购买渠道

点击将打开各零售商的搜索页面。价格与库存以零售商为准。

现在买还是再等等?

购买好时机

性价比最佳时机

上市约一年,第一波真正的折扣已经出现,而替代型号还要 6 到 18 个月才会推出。性价比高,也不会显得过时。

基于发布时间和该系列通常的换代周期,并非实时报价。

杆面倾角参数

Sub 70 669 TC 的7号铁杆面倾角为 32 度。套杆为4号铁至PW。适合差点 0 至 12 的球手。

Sub 70 669 TC (2025) 杆面倾角表
球杆杆面倾角杆底角长度偏置
4i22°60.5°38.5"2.7 mm
5i25°61°38"2.5 mm
6i28°61.5°37.5"2.2 mm
7i32°62°37"2 mm
8i36°62.5°36.5"1.8 mm
9i40°63°36"1.7 mm
PW45°63.5°35.75"1.5 mm

数据涵盖 4i 至 PW (共 7 支)。如果 Sub 70 为这套杆提供其他球杆 (例如间隙挖起杆),目前还不在我们的数据中。

669 TC 各号杆面倾角

  • Sub 70 669 TC 4号铁杆面倾角: 22 度
  • Sub 70 669 TC 5号铁杆面倾角: 25 度
  • Sub 70 669 TC 6号铁杆面倾角: 28 度
  • Sub 70 669 TC 7号铁杆面倾角: 32 度
  • Sub 70 669 TC 8号铁杆面倾角: 36 度
  • Sub 70 669 TC 9号铁杆面倾角: 40 度
  • Sub 70 669 TC 劈起杆杆面倾角: 45 度

原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。

已与制造商规格页核对的杆面倾角 (2026年11月15日)

全部 Sub 70 铁杆杆面倾角

Sub 70 669 TC: 预计飞行距离

按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。

球杆杆面倾角中等挥速7号铁约 135y平均挥速7号铁约 150y较快挥速7号铁约 164y
4号铁22°160 y178 y195 y
5号铁25°152 y169 y185 y
6号铁28°144 y160 y175 y
7号铁32°135 y150 y164 y
8号铁36°125 y139 y152 y
9号铁40°115 y128 y140 y
PW45°106 y118 y129 y

飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。

关于 Sub 70 669 TC

The 669 TC uses a forged 1025 carbon steel body with a compact players-cavity shape. Topline is thin, the offset is minimal, and the sole is narrow enough to work through the turf without digging. Look down at address and you see a small footprint, closer to a blade than to a chunky cavity back. The cavity itself pulls a little weight toward the perimeter, which pushes the sweet spot out slightly and softens the sting on toe and heel misses. Forging is the reason this iron feels the way it does. Soft carbon steel gives you that dense, buttery sensation at impact that cast irons struggle to match, and it comes through clearly on flushed shots. The tradeoff is that carbon steel needs care, since it can rust if you leave it wet, so wipe the faces down after a round.

杆面倾角分析

Sub 70 669 TC 的7号铁杆面倾角为 32°,接近传统,与经典的 32 至 34° 基准相近。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 143 至 153 码。5号铁 (25°) 与7号铁之间相差 7°,间隔合理,可能与倾角相近的球道木或铁木杆距离重叠。劈起杆倾角为 45°,属于常规范围,可以顺畅搭配 50 至 52° 的间隙挖起杆。

Sub 70 669 TC 适合哪些球手?

  • ✓You break 85 or better and want a forged iron that still offers a small margin on mishits.
  • ✓The compact blade-like look at address matters to you, but a full muscleback feels like too little help.
  • ✓Direct-to-consumer pricing appeals to you and you don't need a brand name stamped on the back.
  • ✓You like to shape shots and control trajectory rather than just launch the ball high and let it go.
  • ✓You want soft forged feel and are willing to wipe the heads down to keep the carbon steel from rusting.

相关阅读

常见问题

How does the Sub 70 669 TC compare to the standard 669?

The TC is the more compact, more player-focused version. It has a thinner topline, less offset, and a smaller overall head than the standard 669, which trades a bit of forgiveness for a cleaner look and more workability. If you're a low-to-mid handicap who wants a tighter footprint, the TC is the one. If you want maximum help, stick with the 669.

Is the 669 TC forged?

Yes. It's forged from 1025 carbon steel, which is where the soft feel comes from. Because it's carbon steel rather than stainless, the heads can rust over time, so dry them off after wet rounds and store them clean.

Who should play the 669 TC instead of the 699 Pro blade?

The 669 TC is for players who like the compact players-iron look but want a little more forgiveness than a true blade gives. The 699 Pro is a muscleback with almost no help on off-center hits. If you flush it most of the time but still catch the occasional toe strike, the TC is the smarter pick.

Is the Sub 70 669 TC good value?

That's the main reason to buy it. Sub 70 sells direct to the golfer, so a forged players cavity that would cost a lot more from a major brand comes in at a much lower price. The head quality and forging are legitimate, so you're paying less for the same category of iron, not for a lesser one.

Can I get the 669 TC custom fit?

Yes. Sub 70 offers custom shaft, lie, and length options through its direct ordering process, so you can spec the set to your swing rather than buying off the rack. Getting the shaft and lie right matters more with a compact iron like this, so take advantage of it.

Sub 70 669 TC 铁杆适合高差点球手吗?

不太适合。Sub 70 669 TC 是面向击球稳定球手的选手腔背设计。这一类别通常适合差点 0 至 12 的球手。高差点球手会觉得进阶型款式更宽容。

将 669 TC 与以下型号比较

更多 Sub 70 铁杆

看看这套铁杆是否适合你

在推荐工具中把它设为基准,或与另一套铁杆并排比较。