Honma's Beres line has never chased the same golfer as the rest of the market. It's the luxury end of the Japanese equipment world, built in Sakata and finished to a standard most brands don't bother with. The Beres 10 keeps that identity and points it squarely at players who want the ball airborne with the least possible effort. This is a Super Game Improvement iron in the truest sense, and it makes no apology for it.
The loft chart tells you who Honma had in mind. A 27-degree 7-iron is strong, and the long irons run tight at three degrees apart through the 5, 6, and 7. That's a set engineered to turn moderate swing speed into real distance and a high, soft landing. If you've lost a few miles per hour off your swing over the years and watched your long irons stop holding greens, this is the kind of club built to give that back.
What you won't get is workability or a compact look at address. The Beres 10 isn't trying to be a shotmaker's tool, and pretending otherwise would miss the point. It's for the golfer who values ease, forgiveness, and craftsmanship over the ability to hit a low cut on command.
简而言之
Honma Beres 10 (2026) 是一款为挥速较慢和差点较高的球手打造的最高容错铁杆。套杆为5号铁至SW,7号铁杆面倾角为 27°。2026年发布。
Honma Beres 10 铁杆: 关键参数
- 类别
- 超级进阶型
- 适合差点范围
- 20 及以上
- 套装组成
- 5号铁至SW
- 7号铁杆面倾角
- 27 度
- 杆面倾角范围
- 21 至 55 度
- 型号年份
- 2026
购买渠道
点击将打开各零售商的搜索页面。价格与库存以零售商为准。
Honma Beres 10: 铁杆系列演变
Honma 这一系列从 Beres 09 (2023) 到 Beres 10 (2026) 共 2 代,Beres 10 是第 2 代。它的上一代是 Beres 09 (2023)。这是该系列的最新一代。
- 2026Beres 10当前型号
杆面倾角参数
Honma Beres 10 的7号铁杆面倾角为 27 度。套杆为5号铁至SW。适合差点 20 及以上 的球手。
| 球杆 | 杆面倾角 |
|---|---|
| 5i | 21° |
| 6i | 24° |
| 7i | 27° |
| 8i | 31° |
| 9i | 35° |
| PW | 40° |
| AW | 45° |
| SW | 55° |
数据涵盖 5i 至 SW (共 8 支)。如果 Honma 为这套杆提供其他球杆 (例如4号铁),目前还不在我们的数据中。
Beres 10 各号杆面倾角
- Honma Beres 10 5号铁杆面倾角: 21 度
- Honma Beres 10 6号铁杆面倾角: 24 度
- Honma Beres 10 7号铁杆面倾角: 27 度
- Honma Beres 10 8号铁杆面倾角: 31 度
- Honma Beres 10 9号铁杆面倾角: 35 度
- Honma Beres 10 劈起杆杆面倾角: 40 度
- Honma Beres 10 间隙挖起杆杆面倾角: 45 度
- Honma Beres 10 沙坑挖起杆杆面倾角: 55 度
原厂钢制杆身。杆面倾角为近似值,可能因制造公差而略有不同。
已与制造商规格页核对的杆面倾角 (2026年11月15日)
Honma Beres 10: 预计飞行距离
按挥速列出的典型飞行距离,已根据这套杆的实际杆面倾角调整。你的实际距离会因击球质量、杆身和场地条件而不同。
| 球杆 | 杆面倾角 | 中等挥速7号铁约 147y | 平均挥速7号铁约 162y | 较快挥速7号铁约 176y |
|---|---|---|---|---|
| 5号铁 | 21° | 166 y | 183 y | 199 y |
| 6号铁 | 24° | 157 y | 173 y | 188 y |
| 7号铁 | 27° | 147 y | 162 y | 176 y |
| 8号铁 | 31° | 137 y | 151 y | 164 y |
| 9号铁 | 35° | 125 y | 138 y | 150 y |
| PW | 40° | 115 y | 127 y | 138 y |
飞行距离根据 TrackMan 基准数据按各杆杆面倾角换算得出,并非这款型号的实测数据。
关于 Honma Beres 10
The design leans on everything that helps a slower or less consistent swing: a wider sole, a low and deep center of gravity, and perimeter weighting that keeps mishits from falling out of the sky. Honma builds the Beres around light overall weight, which is a big part of how the set launches high despite those strong lofts. Lighter clubs let a golfer with less speed still get the head moving and square the face at impact. One thing worth watching is the gapping. The long irons sit three degrees apart, but the short irons stretch to five degrees between the 8, 9, and PW. That means bigger distance jumps at the scoring end than at the top of the set, so you may want to pay attention to your wedge spacing below the pitching wedge to avoid a hole in your yardages inside 130.
杆面倾角分析
Honma Beres 10 的7号铁杆面倾角为 27°,偏强,明显强于传统的 32 至 34° 标准。对于挥速 85 至 95 mph 的球手,预计7号铁的飞行距离约为 161 至 171 码。5号铁 (21°) 与7号铁之间相差 6°,间隔合理,中铁之间的距离可以清楚分开。劈起杆倾角为 40°,相对较强,建议搭配 46 至 48° 的间隙挖起杆,衔接到沙坑挖起杆的距离。
Honma Beres 10 适合哪些球手?
- ✓You swing at moderate or slower speed and struggle to get long irons up and holding greens.
- ✓Build quality and finish matter to you, and you're willing to pay a premium for a set made to Honma's standard.
- ✓You want maximum forgiveness and easy launch rather than the ability to shape shots or work the ball.
相关阅读
常见问题
Is the Honma Beres 10 good for slower swing speeds and seniors?
Yes, this is one of the main golfers Honma designed it for. The lightweight build, low center of gravity, and wide sole all work together to launch the ball high without demanding a lot of speed. Players who've lost distance and struggle to keep long irons in the air are the target here.
Why is the 7-iron only 27 degrees?
It's a strong loft, which is common in Super Game Improvement irons because it adds distance. Honma offsets it with a design built to launch high anyway, so you get the extra yards without the low, hard-to-stop flight that strong lofts can cause on their own.
Can better players use the Beres 10?
They can, but it's not built for them. There's no meaningful workability and the look at address is chunky compared to a players iron. A low-handicapper who wants to shape shots will feel boxed in. The golfer who benefits most is one who values forgiveness and easy launch over control.
How are the distance gaps between clubs?
The long irons are tightly spaced at three degrees apart, while the short irons widen to five degrees between the 8-iron, 9-iron, and pitching wedge. That means larger yardage jumps at the scoring end, so plan your wedges below the PW carefully to keep your gaps even inside 130 yards.
Is the Beres 10 worth the price?
That depends on what you're buying it for. You're paying for Honma's craftsmanship and the luxury finish as much as the performance. If you want game improvement help at the lowest cost, there are cheaper irons that launch just as high. If the build quality and the Beres name matter to you, that's where the value sits.
Honma Beres 10 铁杆适合高差点球手吗?
适合。Honma Beres 10 是超级进阶型设计,注重容错和易起飞。这一类别通常适合差点 20 及以上 的球手。
Honma Beres 10 的替代选择
其他品牌的超级进阶型 铁杆型号,按发布年份最接近排列。