Chuyển đến nội dung chính

Cobra

Cobra King MIM Wedge

Tour Grind202046°-60°

The King MIM is Cobra's answer to a question most golfers never ask: how consistent is the wedge you just bought? Most wedge heads are cast, then hand-ground to spec, which means small differences from one head to the next. Cobra built these through metal injection molding, where powdered metal gets pressed into a precise mold under heat and pressure. The result is a head that comes out of production already close to final shape, with tighter tolerances than casting allows.

That matters more than it sounds. When you carry a 50, a 54, and a 58, you want them to feel like siblings, not strangers. The MIM process gives you that. Loft, bounce, and center of gravity land where Cobra intended, wedge after wedge. The multi-material construction adds weight where it helps stability without inflating the head, so these stay compact at address.

Offered from 46 through 60 degrees, the King MIM covers the full gap-to-lob range. This is a players wedge that leans on manufacturing precision rather than forgiveness gimmicks. If you take your short game seriously and want tools that behave predictably, it earns a look.

Tóm lại

Cobra King MIM (2020) là một cây wedge tour grind cho nhiều kiểu cú đánh quanh green. Loft từ 46° đến 60°. Ra mắt năm 2020.

Cobra King MIM Wedge: Thông số chính

Danh mục
Tour Grind
Handicap phù hợp
0 đến 10
Khoảng loft
46 đến 60 độ
Tùy chọn Loft/Grind
7
Năm sản xuất
2020

Nơi mua

Mở trang tìm kiếm của từng nhà bán lẻ cho gậy này. Giá và tồn kho do nhà bán lẻ quyết định.

Mua ngay hay chờ đợi?

Mua hay chờ

Sắp có mẫu mới

Các hãng trong phân khúc này thường ra mẫu mới khoảng 2 năm một lần, và King MIM đã ra mắt được 6 năm mà chưa có mẫu kế nhiệm, nên mẫu mới có thể xuất hiện bất cứ lúc nào. Hãy mua ngay với giá xả hàng, hoặc chờ vài tuần để xem mẫu nào thay thế.

Dựa trên thời điểm ra mắt và chu kỳ ra mẫu mới thường thấy của dòng này, không phải báo giá trực tiếp.

Các phiên bản có sẵn

LoftBounceGrindLớp hoàn thiện
46°8°STChrome
50°9°STChrome
52°9°STChrome
54°10°STChrome
56°10°STChrome
58°9°STChrome
60°9°STChrome

Loft và Bounce là giá trị danh nghĩa. Thông số thực tế có thể khác.

Công nghệ

RènĐa vật liệu

Giới thiệu Cobra King MIM

The Tour grind sole is the story here. It's a versatile shape with relieved heel and toe, so you can open the face for a flop or a bunker shot and the leading edge stays down instead of riding up off the turf. Square it up for a stock full wedge and it sits clean. This grind rewards players who manipulate the face and move the ball around the green rather than hitting every shot the same way. Metal injection molding is the manufacturing headline, but the payoff is feel and repeatability. The dense, uniform head produced by the process gives a soft, solid sensation at impact, and because every head starts from the same mold, the grind and CG are more consistent than hand-finished wedges. The compact profile and thin topline read like a blade at address, which is what better players want looking down on a scoring club.

Ai nên dùng Cobra King MIM?

  • ✓Mid to low handicap players who shape shots around the green and want a sole that supports an open face.
  • ✓Golfers building a matched wedge set from gap through lob who care about consistent loft and bounce between heads.
  • ✓Players who value a compact, blade-like look and soft feel over max-forgiveness cavity designs.
  • ✓Anyone curious whether MIM construction actually delivers tighter tolerances than a standard cast wedge.

Bài viết liên quan

Câu hỏi thường gặp

What does MIM mean on the Cobra King MIM wedge?

MIM stands for metal injection molding. Cobra presses powdered metal into a precise mold under heat and pressure, so each head comes out close to final shape with tighter tolerances than casting. The main benefit is consistency, your 54 and 58 are ground and weighted the same way, plus a soft, solid feel at impact.

Is the Tour grind on the King MIM good for bunkers and open-face shots?

Yes. The Tour grind relieves the heel and toe, so when you open the face the leading edge stays close to the turf instead of lifting. That makes greenside flops, bunker shots, and touch shots easier to execute. It's a versatile grind aimed at players who like to manipulate the face.

What lofts does the Cobra King MIM come in?

It's available in 46, 50, 52, 54, 56, 58, and 60 degrees. That range lets you fill your gap wedge slot around 46 to 50, add a 54 or 56 as a sand wedge, and finish with a 58 or 60 for lob shots. Pick spacing of four to six degrees between wedges for even distance gaps.

Is the King MIM a forgiving wedge for higher handicappers?

It's a players wedge, not a game-improvement one. The head is compact with a thin topline and a versatile Tour grind, which rewards clean contact and shot-making more than it hides mishits. Higher handicappers who want maximum forgiveness may prefer a wider-soled, more forgiving design, but golfers with decent short-game skills will appreciate the control.

How is the King MIM different from a standard cast Cobra wedge?

The difference is the manufacturing process. Standard wedges are usually cast and then finished, while the King MIM is built through metal injection molding for tighter tolerances and a denser, more uniform head. In practice you get more consistent bounce, loft, and center of gravity across the set, plus a softer feel than typical cast wedges.

Wedge Cobra King MIM có hợp với người chơi handicap cao không?

Không. Cobra King MIM là thiết kế Tour Grind dành cho người đánh bóng tốt. Dòng này thường hợp với handicap 0 đến 10. Người chơi handicap cao sẽ thấy mẫu Game Improvement dễ đánh hơn.

Lựa chọn thay thế cho Cobra King MIM

Các mẫu Tour Grind Wedge khác từ những thương hiệu khác, có năm ra mắt gần nhất.

Thêm gậy wedge Cobra

Tìm Loft phù hợp cho túi gậy của bạn

Dùng công cụ tìm khoảng cách để xem tổ hợp Loft nào hợp với bộ gậy hiện tại của bạn.

Mở công cụ tìm khoảng cách →