Chuyển đến nội dung chính

Bettinardi

Bettinardi BB49 Putter

2026Mallet$495

Tóm lại

Bettinardi BB49 (2026) là một cây putter mallet thiết kế cho độ ổn định và dễ ngắm. Thiết kế face balanced, có vạch ngắm tích hợp. Giá niêm yết (MSRP) là $495.

Putter mallet

The Bettinardi BB49 is a face-balanced mallet from the 2025 BB Series, the line Bettinardi builds for players who want a milled putter without stepping into the premium Queen B or DASS price range. It's cut from a solid block of carbon steel at the company's shop in Tinley Park, Illinois, and the mallet shape here is aimed squarely at golfers who fight a pull or a push and want the head to resist twisting.

What you get is a putter that wants to move straight back and straight through. The face-balanced weighting means the face stays pointing at the sky when you balance the shaft on your finger, which tells you the toe won't hang down and rotate through impact the way it does on a blade. If your putting stroke has very little arc, this head matches it.

The BB49 also carries an alignment aid, so setting the ball on line isn't guesswork. This is a forgiving, stability-first mallet, and it doesn't pretend to be a shot-shaping tool for feel players who like to release the putter. It's built for consistency, and it's honest about that.

Thiết kế

The mallet body does the heavy lifting on forgiveness. By pushing weight out toward the perimeter and heel-toe extremes, Bettinardi raises the head's resistance to twisting on off-center hits, so a putt struck slightly toward the toe rolls out closer to your intended speed than it would on a compact blade. The face-balanced setup pairs with that stability to keep the stroke simple and repeatable. Alignment is handled with a built-in aid to frame the ball and give your eyes a clear reference at address. Bettinardi mills these heads in-house rather than casting them, and that single-block construction is a big part of why the brand's putters feel firm and consistent across the face. The result is a mallet that stays quiet through the stroke and gives you a dependable read on line and pace.

Dành cho ai

  • You have a straight-back, straight-through stroke with minimal arc and want a head that matches it.
  • Pulls and pushes are your miss, and you want perimeter weighting to calm the face down through impact.
  • Lining up putts is a weak spot and an alignment aid would speed up your setup.
  • You want a milled, American-made putter but don't need to spend Queen B or DASS money to get one.
  • Off-center strikes cost you too many two-putts, and you want the extra stability of a mallet.

Công nghệ

Phân bổ trọng lượng vành ngoàiVạch ngắmHoneycomb Face MillingOne-Piece Construction

Giới thiệu Bettinardi

Bettinardi là một trong số ít thương hiệu vẫn phay mọi cây putter tại xưởng riêng. Kiểu phay mặt tổ ong đặc trưng và cấu trúc một khối tạo nên cảm giác và độ ổn định vượt trội.

Thông số kỹ thuật

Thương hiệuBettinardi
MẫuBB49
Năm2026
LoạiMallet
Toe hangFace balanced
Vạch ngắmCó
MSRP$495

Bettinardi BB49: các thế hệ putter

BB49 là thế hệ thứ 3 trong 3 thế hệ mà Bettinardi đã ra mắt ở dòng này, từ BB1 (1998) đến BB49 (2026). Mẫu này ra sau BB8 (2005). Đây là thế hệ mới nhất của dòng.

  1. 1998BB1
  2. 2005BB8
  3. 2026BB49Mẫu đang xem· MSRP $495

Câu hỏi thường gặp

Is the Bettinardi BB49 face-balanced or toe-hang?
It's face-balanced. Rest the shaft across your finger and the face points straight up, which means the toe won't drop and rotate through the stroke. That makes it a good fit for a straight-back, straight-through motion and a poor match if you have a strong arc and like to release the putter.
What kind of stroke suits the BB49?
A stroke with little to no arc. Because the head is face-balanced and built as a stable mallet, it rewards players who move the putter straight back and straight through. If your natural stroke swings noticeably inside on the backswing, a toe-hang blade or mid-mallet will feel more natural.
Does the BB49 have an alignment aid?
Yes. It has a built-in alignment aid to frame the ball and give your eyes a clear line at address, which helps if aiming the face consistently is a weakness in your setup.
Where are Bettinardi putters made?
Bettinardi mills its putters in-house in Tinley Park, Illinois. The BB49 is cut from a solid block of steel rather than cast, which is a big reason the brand's putters feel firm and consistent across the face.
How does the BB Series compare to Bettinardi's higher-end lines?
The BB Series is Bettinardi's more accessible milled line. You get the same in-house milling and build quality without the premium of the Queen B or the soft carbon DASS models. The tradeoff is fewer exotic materials and finishes, not a drop in the core milling that defines the brand.

Nơi mua

Mở trang tìm kiếm của từng nhà bán lẻ cho gậy này. Giá và tồn kho do nhà bán lẻ quyết định.

Thêm putter này vào túi gậy của bạn