PX
The 0311T GEN2 is PXG's blade for the 2018 lineup, and it's exactly what the name implies. The T stands for Tour, the muscle back construction leaves no doubt about who it's built for, and the compact head sits at address like a knife. This is a forged carbon steel blade for players who deliver the ball on the center of the face and want feedback when they don't.
What sets it apart from a traditional muscle back is the tungsten. PXG packs high-density tungsten weighting into the head, which lets them push mass toward the perimeter and low in the club without bloating the shape. You still get the thin topline and minimal offset a blade player expects, but with a touch more stability than a solid slab of steel would give you. It's a small margin, and PXG isn't pretending otherwise.
The 34 degree 7-iron loft tells you this iron is honest about distance. There's no jacked-up loft trickery here to inflate carry numbers. You hit your 7-iron the distance a 7-iron should go, and the gapping through the set stays clean and predictable. That matters more to a blade player than a couple of extra yards ever will.
Tóm lại
The PXG 0311T GEN2 (2018) is a compact blade for skilled ball-strikers who want feel and shot control. The set runs 3-iron to PW with a 34° 7-iron. It carries a $595 MSRP.
PXG 0311T GEN2 Gậy sắt: Thông số chính
- Danh mục
- Blade
- Cấu thành bộ gậy
- 3-iron to PW
- 7-iron loft
- 34 degrees
- Khoảng loft
- 20 to 46 degrees
- Năm sản xuất
- 2018
- MSRP
- $595
Mua ngay hay chờ đợi?
Mua ngayLast-gen value buy
The newer 0311 T GEN8 (2026) is already out, so the 0311T GEN2 now sells at closeout pricing. If you do not need the very latest tech, this is the smart-money pick.
Based on release timing and this line's typical refresh cycle, not a live price quote.
Bán hoặc đổi cũ lấy mới
Ước tínhModeled from the $595 original MSRP and a 8-year-old release (about 16% of MSRP retained used).
Giá trị thị trường đã qua sử dụng
$80 - $105
Private sale, fair to like-new
Giá trị đổi cũ lấy mới
$50 - $75
Mức giá cửa hàng thường trả
Nhận báo giá chính xác
Estimate only, from a depreciation model, not a live quote. Search “PXG 0311T GEN2” on the sites above for the real number, which varies with condition, shaft, and demand.
PXG 0311T GEN2: the iron lineage
The 0311T GEN2 is the 1st of 2 generations PXG has released in this line, from the 0311T GEN2 (2018) to the 0311 T GEN8 (2026). It is where the line started. The 0311 T GEN8 (2026) replaced it.
- 20180311T GEN2You are here· $595 MSRP
Thông số Loft
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 20.0° | 23.0° | 26.0° | 30.0° | 34.0° | 38.0° | 42.0° | 46.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
PXG 0311T GEN2: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| Gậy | Loft | Moderate swing~130y 7-iron | Average swing~145y 7-iron | Faster swing~159y 7-iron |
|---|---|---|---|---|
| 3-iron | 20° | 162 y | 181 y | 199 y |
| 4-iron | 23° | 154 y | 172 y | 189 y |
| 5-iron | 26° | 147 y | 164 y | 180 y |
| 6-iron | 30° | 139 y | 155 y | 170 y |
| 7-iron | 34° | 130 y | 145 y | 159 y |
| 8-iron | 38° | 121 y | 135 y | 148 y |
| 9-iron | 42° | 111 y | 124 y | 136 y |
| PW | 46° | 102 y | 114 y | 125 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
Công nghệ
About the PXG 0311T GEN2
PXG forges the 0311T GEN2 from soft carbon steel and finishes it as a true muscle back, so the mass sits directly behind the impact zone for a dense, connected feel at contact. The tungsten weighting is the design story. By moving that heavy material to the toe and low in the head, PXG shifts the center of gravity without adding bulk to the profile, which is why the club can hold a thin topline and short blade length while behaving slightly more forgivingly than its looks suggest. The set runs from a 20 degree 3-iron down to a 46 degree pitching wedge in four degree increments through the middle irons. Offset is minimal and the sole is narrow, both of which give a skilled player the ability to work the ball, control trajectory, and hit the flighted shots that a blade rewards. Turf interaction is precise rather than forgiving, so it asks for a clean, ball-first strike.
Phân tích Loft
The PXG 0311T GEN2's 7-iron is lofted at 34° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 136-146 yards. The 5-iron (26°) to 7-iron gap of 8° is spread across a wide range, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 46° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
Who Should Play the PXG 0311T GEN2?
- ✓Low handicappers and better who consistently find the center of the face and want the feedback a blade provides on mishits.
- ✓Players who shape shots on purpose and value trajectory control over raw distance or forgiveness.
- ✓Golfers who prefer honest lofts and clean gapping, since the 34 degree 7-iron won't inflate your numbers.
- ✓Anyone drawn to PXG's forged feel who wants a fraction more stability than a conventional muscle back, thanks to the tungsten weighting.
- ✓Skilled ball strikers who like a compact head, thin topline, and minimal offset at address.
Câu hỏi thường gặp
Is the PXG 0311T GEN2 a true blade or a players cavity?
It's a true muscle back blade. The back of the head is solid behind the hitting area rather than hollowed out into a cavity. The tungsten weighting gives it a hair more stability than an old-school blade, but the shape, the thin topline, and the demand for center contact are all pure blade.
What handicap should you be to play these?
This is a single-digit handicap iron, and realistically it suits mid-single-digits and below. If you're not striking the center of the face most of the time, the blade construction will punish you on distance and dispersion. Better players will love the feedback and control.
Why does a blade have tungsten weighting?
PXG uses tungsten because it's much denser than steel, so a small amount of it moves a lot of mass. That lets them position the center of gravity low and toward the perimeter without widening the sole or thickening the topline. You get the compact blade look with a slightly more stable strike than a plain forged blade would offer.
What is the 7-iron loft and how does that affect distance?
The 7-iron is 34 degrees, which is traditional and honest. Many modern irons strengthen lofts to two or three degrees to boast bigger numbers, so you'll likely hit this 7-iron shorter than a game improvement 7-iron. The tradeoff is cleaner gapping, higher spin, and more control into greens.
How does the 0311T GEN2 compare to PXG's more forgiving 0311 irons?
The T model is the players blade in the family, built for shot-making and feedback. The other 0311 models, like the P and XF versions, use hollow bodies and more perimeter weighting for higher launch and more forgiveness. If you want help on mishits, look at those. If you want to work the ball and feel every strike, the T is the one.
Đánh giá & Nhận xét
No ratings yet. Sign in to rate this club.
Alternatives to the PXG 0311T GEN2
Other blade iron models from different brands, closest to its model year.
More PXG Gậy sắt
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.