Chuyển đến nội dung chính

Epon is the house brand of Endo Manufacturing, the Japanese forging house in Tsubame-Sanjo that has quietly made heads for some of the biggest names in golf. When Endo puts its own name on a club, it holds nothing back. The 2008 AF-Tour is that idea in its purest form, a one-piece forged muscle back with no cavity, no slots, and no apologies.

This was never a club for the masses. Epon sold the AF-Tour largely through fitting shops, often as bare heads built to order, and it earned a cult following among low handicappers and JDM equipment collectors who cared more about feel and precision than forgiveness. Strike it flush and the sensation is soft in a way that mass-market forgings rarely match. Miss it and the club tells you exactly where contact happened, which is either the whole point or a dealbreaker depending on who you are.

Almost two decades later, the AF-Tour still trades hands at strong prices on the secondhand market. That says more than any spec sheet. Blades from 2008 that were merely good got forgotten. This one didn't.

Tóm lại

Epon AF-Tour (2008) là một bộ gậy sắt blade gọn gàng cho người đánh bóng tốt, muốn cảm giác và khả năng điều khiển cú đánh. Bộ gậy gồm sắt số 3 đến PW, Loft gậy sắt số 7 là 36°. Ra mắt năm 2008.

Epon AF-Tour Gậy sắt: Thông số chính

Danh mục
Blade
Handicap phù hợp
0 đến 5
Cấu thành bộ gậy
sắt số 3 đến PW
Loft gậy sắt số 7
36 độ
Khoảng loft
22 đến 48 độ
Năm sản xuất
2008

Nơi mua

Mở trang tìm kiếm của từng nhà bán lẻ cho gậy này. Giá và tồn kho do nhà bán lẻ quyết định.

Mua ngay hay chờ đợi?

Mua hay chờ

Sắp có mẫu mới

Các hãng trong phân khúc này thường ra mẫu mới khoảng 2 năm một lần, và AF-Tour đã ra mắt được 18 năm mà chưa có mẫu kế nhiệm, nên mẫu mới có thể xuất hiện bất cứ lúc nào. Hãy mua ngay với giá xả hàng, hoặc chờ vài tuần để xem mẫu nào thay thế.

Dựa trên thời điểm ra mắt và chu kỳ ra mẫu mới thường thấy của dòng này, không phải báo giá trực tiếp.

Thông số Loft

Gậy sắt số 7 của Epon AF-Tour có Loft 36 độ, và bộ gậy gồm sắt số 3 đến PW. Bộ gậy hợp với người chơi có handicap 0 đến 5.

Bảng Loft Epon AF-Tour (2008)
GậyLoft
3i22°
4i25°
5i28°
6i32°
7i36°
8i40°
9i44°
PW48°

Dữ liệu gồm 3i đến PW (8 gậy). Nếu Epon bán thêm gậy cho bộ này (ví dụ gap wedge), chúng tôi chưa có dữ liệu về các gậy đó.

Loft từng gậy AF-Tour

  • Loft sắt số 3 của Epon AF-Tour: 22 độ
  • Loft sắt số 4 của Epon AF-Tour: 25 độ
  • Loft sắt số 5 của Epon AF-Tour: 28 độ
  • Loft sắt số 6 của Epon AF-Tour: 32 độ
  • Loft sắt số 7 của Epon AF-Tour: 36 độ
  • Loft sắt số 8 của Epon AF-Tour: 40 độ
  • Loft sắt số 9 của Epon AF-Tour: 44 độ
  • Loft pitching wedge của Epon AF-Tour: 48 độ

Cán thép tiêu chuẩn. Loft là giá trị gần đúng và có thể chênh lệch theo dung sai sản xuất.

Loft đã đối chiếu với bản lưu trang thông số của nhà sản xuất (15 thg 11, 2026)

Tất cả Loft gậy sắt Epon

Epon AF-Tour: khoảng cách carry dự kiến

Khoảng cách carry thông thường theo tốc độ swing, đã điều chỉnh theo Loft thực tế của bộ gậy này. Con số của bạn sẽ khác tùy điểm tiếp bóng, cán gậy và điều kiện sân.

GậyLoftSwing vừaSắt số 7 ~125ySwing trung bìnhSắt số 7 ~140ySwing nhanhSắt số 7 ~154y
Sắt số 322°156 y175 y193 y
Sắt số 425°148 y166 y183 y
Sắt số 528°142 y159 y175 y
Sắt số 632°134 y150 y165 y
Sắt số 736°125 y140 y154 y
Sắt số 840°117 y131 y144 y
Sắt số 944°107 y120 y132 y
PW48°98 y110 y121 y

Khoảng cách carry được tính từ số liệu chuẩn dựa trên TrackMan, quy đổi theo Loft của từng gậy, không phải đo trực tiếp với mẫu này.

Giới thiệu Epon AF-Tour

The AF-Tour is forged from S20C soft carbon steel, the mild, low-carbon billet Japanese makers reserve for their best feel-focused heads. Endo's forging process works the grain tight through the impact area, and the result is a dense, quiet strike rather than a clicky one. The shape is classic muscle back: thin topline, minimal offset, a compact head that sits square and begs to be worked in both directions. There are no modern crutches here. Mass sits directly behind the center of the face, sole width is narrow, and the leading edge is tidy enough to nip ball first from tight lies. It rewards a player who controls low point and punishes one who doesn't, by design.

Phân tích Loft

Gậy sắt số 7 của Epon AF-Tour có Loft 36°, mức yếu, Loft lớn hơn phần lớn gậy sắt hiện đại. Với người chơi có tốc độ swing 85 đến 95 mph, khoảng carry của gậy sắt số 7 ước tính khoảng 129 đến 139 yard. Chênh lệch Loft giữa sắt số 5 (28°) và sắt số 7 là 8°, khá rộng, có thể trùng khoảng cách với gậy fairway wood hoặc hybrid có Loft gần nhau. Pitching wedge có Loft 48°, là Loft truyền thống, ghép tự nhiên với gap wedge 52° tiêu chuẩn.

Ai nên dùng Epon AF-Tour?

  • ✓Single-digit players who strike the center of the face consistently and want maximum feedback and shot-shaping control.
  • ✓Feel-first golfers who care about forged carbon steel and view impact sensation as part of the fitting equation, not a bonus.
  • ✓Collectors and JDM equipment fans who want an Endo forging with Epon's own name on it rather than an OEM badge.

Bài viết liên quan

Câu hỏi thường gặp

Who actually makes Epon AF-Tour irons?

Endo Manufacturing, a forging house in Tsubame-Sanjo, Japan. Endo has contract-forged heads for major brands for decades, and Epon is its in-house label. The AF-Tour is forged and finished at the same facility, which is a big part of its reputation.

Are the 2008 Epon AF-Tour irons forgiving?

No, and they were never meant to be. This is a true muscle back with mass concentrated behind the sweet spot. Off-center strikes lose distance and feel harsh compared to a cavity back. If you need help on mishits, look at Epon's AF-302 or AF-503 lines from the same era instead.

What handicap should you be to play the AF-Tour?

There's no hard rule, but these make the most sense for players around a 5 handicap or better who hit the center of the face on most swings. A consistent 8 or 10 who accepts the tradeoff can play them, but scoring will likely suffer versus a more forgiving head.

Are used Epon AF-Tour irons worth the price today?

If feel and build quality matter to you, yes. They hold value better than most 2008-era blades because supply was small and demand from JDM collectors stays steady. Check face wear and groove condition carefully, since many sets saw heavy range use, and note that lofts were often bent to order during the original fitting.

What shafts came in the Epon AF-Tour?

Most AF-Tour irons were sold as heads and built to order through fitters, so there's no single stock shaft. Common builds used Dynamic Gold, Project X, or Nippon Modus and NS Pro steel. If you're buying used, confirm the shaft, actual lofts, and swingweight rather than assuming factory specs.

Gậy sắt Epon AF-Tour có hợp với người chơi handicap cao không?

Không. Epon AF-Tour là thiết kế Blade dành cho người đánh bóng tốt. Dòng này thường hợp với handicap 0 đến 5. Người chơi handicap cao sẽ thấy mẫu Game Improvement dễ đánh hơn.

Bộ gậy sắt Epon AF-Tour có phải là blade không?

Có. Epon AF-Tour là blade thực thụ (muscle back): đầu gậy gọn, topline mỏng, offset tối thiểu và không có cavity dồn trọng lượng ra viền. Bộ gậy này thưởng cho cú đánh trúng tâm và hướng tới người chơi handicap thấp.

Lựa chọn thay thế cho Epon AF-Tour

Các mẫu Blade Gậy sắt khác từ những thương hiệu khác, có năm ra mắt gần nhất.

Thêm gậy sắt Epon

Xem bộ gậy sắt này có hợp với bạn không

Dùng làm bộ gậy gốc trong công cụ gợi ý, hoặc so sánh song song với một bộ khác.