Miura doesn't chase distance numbers, and the TC-201 makes that obvious the moment you look at the bag it fits. This is a forged cavity back built in Himeji, Japan, aimed at the golfer who wants more room for error than a blade gives but who has no interest in the thick toplines and hot faces of game improvement irons. The name tells you the intent. TC means tour cavity, and the whole design is about control first, help second.
The lofts are traditional, and that matters more than it sounds. A 34 degree 7 iron and a 48 degree pitching wedge keep your gapping honest and let your wedge set actually make sense underneath them. You are not going to hit these a club longer than your playing partner's game improvement irons, and Miura made no attempt to let you. What you get instead is a flight you can predict, yardages that repeat, and a ball that comes off the face the same way shot after shot.
Feel is the reason most people end up with Miura irons, and the TC-201 delivers the soft, dense sensation the brand is known for. A center strike is quiet and buttery. A slight miss still tells you exactly where it hit, which is the feedback better players actually want. This is a forgiving players iron, but it won't pretend to be a set that saves every swing for you.
要点
The Miura TC-201 (2022) is a players cavity that adds forgiveness without much extra size. The set runs 3-iron to PW with a 34° 7-iron. It carries a $2,095 MSRP.
Miura TC-201 アイアン: 主要スペック
- カテゴリ
- プレーヤーズキャビティ
- セット構成
- 3-iron to PW
- 7-iron loft
- 34 degrees
- ロフト範囲
- 21 to 48 degrees
- モデル年式
- 2022
- MSRP
- $2095
今買うべきか、待つべきか？
今すぐ買うLast-gen value buy
The newer TC-202 (2025) is already out, so the TC-201 now sells at closeout pricing. If you do not need the very latest tech, this is the smart-money pick.
Based on release timing and this line's typical refresh cycle, not a live price quote.
売却・下取りに出す
見積もりModeled from the $2,095 original MSRP and a 4-year-old release (about 27% of MSRP retained used).
中古市場価格
$480 - $635
Private sale, fair to like-new
下取り価格
$290 - $445
ショップの一般的な買取価格
正確な見積もりを取得
Estimate only, from a depreciation model, not a live quote. Search “Miura TC-201” on the sites above for the real number, which varies with condition, shaft, and demand.
Miura TC-201: the iron lineage
The TC-201 is the 1st of 2 generations Miura has released in this line, from the TC-201 (2022) to the TC-202 (2025). It is where the line started. The TC-202 (2025) replaced it.
- 2022TC-201You are here· $2,095 MSRP
ロフトスペック
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 21.0° | 24.0° | 27.0° | 30.5° | 34.0° | 38.0° | 43.0° | 48.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Miura TC-201: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| クラブ | ロフト | Moderate swing~130y 7-iron | Average swing~145y 7-iron | Faster swing~159y 7-iron |
|---|---|---|---|---|
| 3-iron | 21° | 162 y | 181 y | 199 y |
| 4-iron | 24° | 154 y | 172 y | 189 y |
| 5-iron | 27° | 147 y | 164 y | 180 y |
| 6-iron | 30.5° | 139 y | 155 y | 170 y |
| 7-iron | 34° | 130 y | 145 y | 159 y |
| 8-iron | 38° | 121 y | 135 y | 148 y |
| 9-iron | 43° | 111 y | 124 y | 136 y |
| PW | 48° | 102 y | 114 y | 125 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
テクノロジー
About the Miura TC-201
The TC-201 is grain flow forged from soft carbon steel, and Miura's finishing work shows in the compact profile, the thin topline, and the minimal offset. The cavity is modest, tucked behind a fuller sole and a slightly wider body than a blade, which moves a bit of weight to the perimeter without inflating the look at address. Nothing about the head screams for attention when you set it down. Lofts run progressively through the set, with tighter three and four degree gaps up top and a clean step down into the scoring irons. The long irons carry a touch more cavity and a slightly bigger footprint to get the ball up, while the short irons tighten and firm up for the control you need from 8 iron down. It reads as a matched set that shifts personality as you move through the bag rather than eight copies of the same head.
ロフト分析
The Miura TC-201's 7-iron is lofted at 34° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 136-146 yards. The 5-iron (27°) to 7-iron gap of 7° is well-gapped, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 48° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
Who Should Play the Miura TC-201?
- ✓Single digit and low-teens handicaps who strike it well but want a little forgiveness on the toe and heel misses a blade punishes.
- ✓Players coming down from a full blade set who miss the feel but want the mishits to hurt a bit less.
- ✓Anyone who values honest gapping and a controllable flight over jacked lofts and extra carry distance.
よくある質問
Is the Miura TC-201 a blade or a cavity back?
It's a cavity back, but a compact one. The cavity is small and the topline is thin, so at address it looks close to a blade. The perimeter weighting just gives you a bit more stability on off-center hits than a true muscle back would.
Are the TC-201 lofts strong or traditional?
Traditional. The 7 iron is 34 degrees and the pitching wedge is 48, which is weaker than most game improvement sets by several degrees. That keeps your distance gaps consistent and lets your wedges fit cleanly below the set.
Who should play the TC-201 versus the Miura MB blade?
Go with the TC-201 if you want the Miura feel but appreciate some help on mishits. The MB blade rewards a more consistent strike and gives even less margin. Plenty of players also mix them, running MB in the short irons and TC-201 in the mid and long irons.
How forgiving is the TC-201 for a mid handicapper?
It's forgiving for a players iron, not for a game improvement iron. A mid handicapper who strikes it fairly well will enjoy the feel and the added stability over a blade. If you fight regular chunks and thins, a wider sole game improvement iron will do more for your scores.
What steel is the TC-201 forged from and where is it made?
It's grain flow forged from soft carbon steel and finished in Miura's factory in Himeji, Japan. That soft steel and the forging process are the reason the impact feel is so quiet and dense compared with cast irons.
評価とレビュー
No ratings yet. Sign in to rate this club.
Alternatives to the Miura TC-201
Other プレーヤーズキャビティ iron models from different brands, closest to its model year.
More Miura アイアン
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.