The Miura MC-502 is a players cavity iron for golfers who want a little help without giving up the look and feel of a blade. MC stands for muscle cavity, and that's exactly what you get here: a compact head with a small pocket carved out behind the hitting area to move a bit of weight to the perimeter. It's forged from soft carbon steel at Miura's shop in Himeji, Japan, which is the whole reason people chase this brand in the first place.
What sets the MC-502 apart from Miura's straight blades is that it forgives the occasional miss off the toe or low on the face without turning into a game-improvement club. The topline is thin, the offset is minimal, and the sole is narrow. Address it and it looks like a players iron should. The cavity is doing quiet work behind the scenes, not shouting about it.
Lofts are on the moderately traditional side. The 7-iron sits at 33 degrees, which is stronger than an old-school blade but nowhere near the jacked-up numbers you see on distance irons pushing 28 or 29. That means your gapping stays sane and your wedges still fit, and the ball flies at a height a good player expects rather than a flat, hot launch you have to fight.
要点
Miura MC-502 (2023年) はサイズをあまり大きくせずにやさしさを加えたプレーヤーズキャビティアイアンです。セット構成は3番アイアン~PWで、7番アイアンのロフトは33°です。2023年発売。
Miura MC-502 アイアン: 主要スペック
- カテゴリ
- プレーヤーズキャビティ
- 目安ハンディキャップ
- 0~12
- セット構成
- 3番アイアン~PW
- 7番アイアンのロフト
- 33度
- ロフト範囲
- 21~46度
- モデル年式
- 2023
購入先
各ショップの検索ページを開きます。価格と在庫は各ショップのものです。
今買うべきか、待つべきか?
買うか待つかモデルチェンジ間近
このカテゴリーのブランドは約2年ごとにモデルを更新します。MC-502は発売から3年たっても後継モデルがまだないため、いつ新モデルが出てもおかしくありません。今のうちに値下がり価格で買うか、数週間待って後継モデルを確かめましょう。
発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。
Miura MC-502: アイアンの系譜
MiuraのこのシリーズはMC-501 (2018年) からMC-502 (2023年) まで全2世代で、MC-502は2世代目です。前モデルはMC-501 (2018年) です。このシリーズの最新世代です。
- 2023MC-502このモデル
ロフトスペック
Miura MC-502の7番アイアンのロフトは33度です。セット構成は3番アイアン~PWです。ハンディキャップ0~12のゴルファーに合います。
| クラブ | ロフト |
|---|---|
| 3i | 21° |
| 4i | 23° |
| 5i | 26° |
| 6i | 29° |
| 7i | 33° |
| 8i | 37° |
| 9i | 41° |
| PW | 46° |
データの範囲は3i~PW (8本) です。Miuraがこのセットに追加のクラブ (例: ギャップウェッジ) を用意していても、まだデータには入っていません。
MC-502 クラブ別ロフト
- Miura MC-502 3番アイアンのロフト: 21度
- Miura MC-502 4番アイアンのロフト: 23度
- Miura MC-502 5番アイアンのロフト: 26度
- Miura MC-502 6番アイアンのロフト: 29度
- Miura MC-502 7番アイアンのロフト: 33度
- Miura MC-502 8番アイアンのロフト: 37度
- Miura MC-502 9番アイアンのロフト: 41度
- Miura MC-502 ピッチングウェッジのロフト: 46度
純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。
メーカーのスペックページで確認したロフト (2026年11月15日)
Miura MC-502: 予想キャリー距離
ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。
| クラブ | ロフト | ゆっくりめのスイング7番アイアン 約132y | 平均的なスイング7番アイアン 約147y | 速めのスイング7番アイアン 約161y |
|---|---|---|---|---|
| 3番アイアン | 21° | 165 y | 184 y | 202 y |
| 4番アイアン | 23° | 157 y | 175 y | 192 y |
| 5番アイアン | 26° | 150 y | 167 y | 183 y |
| 6番アイアン | 29° | 142 y | 158 y | 173 y |
| 7番アイアン | 33° | 132 y | 147 y | 161 y |
| 8番アイアン | 37° | 123 y | 137 y | 150 y |
| 9番アイアン | 41° | 113 y | 126 y | 138 y |
| PW | 46° | 104 y | 116 y | 127 y |
キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。
Miura MC-502について
The head is compact from every angle. Short blade length, thin topline, and a sole that's narrow enough to work out of tight lies but still slides through turf better than a pure blade. The muscle cavity design keeps mass low and behind the center of the face, so strikes stay stable and the sweet spot feels a touch more generous than the small footprint suggests. Soft carbon steel forging gives the MC-502 the dense, buttery impact feel Miura is known for. You feel exactly where you hit it, which is the point of an iron in this category. The finish is clean and understated, and the minimal offset means the leading edge sits close to square, the way better players tend to prefer.
ロフト分析
Miura MC-502の7番アイアンのロフトは33°で、従来どおりで、クラシックなアイアンのロフト基準に沿っています。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約140~150ヤードと見込まれます。5番アイアン(26°)と7番アイアンのロフト差は7°で、間隔は適切です。ロフトの近いフェアウェイウッドやハイブリッドと距離が重なる可能性があります。ピッチングウェッジのロフトは46°で、従来どおりのロフトで、標準的な52°のギャップウェッジと自然に組み合わせられます。
Miura MC-502はどんな人に向いている?
- ✓Single-digit and low-teen handicaps who strike it well but want slightly more room for error than a straight blade gives
- ✓Players moving down from a game-improvement iron who are ready for a smaller head and thinner topline
- ✓Golfers who prioritize feel and feedback and are willing to pay for Japanese forging quality
- ✓Anyone who wants traditional-ish lofts and predictable gapping rather than jacked-up distance numbers
- ✓Ball-strikers who like to shape shots and want an iron that reports honestly on where they caught it
関連記事
よくある質問
Is the Miura MC-502 a blade or a cavity back?
It's a players cavity, which sits between the two. MC stands for muscle cavity, so there's a small pocket behind the face for a bit of forgiveness, but the head is compact with a thin topline and minimal offset like a blade. It looks and feels like a players iron, not a game-improvement club.
How forgiving is the MC-502 compared to a Miura blade?
More forgiving, but only by a margin. The muscle cavity moves some weight to the perimeter, so slightly off-center strikes hold their line and lose a little less distance than they would off a pure blade. If you need real help on mishits, this still isn't the iron for you. It rewards good contact.
What are the lofts on the MC-502?
They run from 21 degrees in the 3-iron to 46 degrees in the pitching wedge, with the 7-iron at 33 degrees. That's moderately traditional, stronger than a classic blade but well short of distance-iron territory, so your gapping and wedge setup stay clean.
Why is the MC-502 so expensive?
You're paying for Miura's forging. The heads are forged from soft carbon steel in Himeji, Japan, with a level of quality control that shows up in the feel at impact. It's a boutique product, not a mass-market iron, and the price reflects the craftsmanship rather than any high-tech gimmick.
Who should choose the MC-502 over a straight players blade?
Golfers who strike it well but want a small safety net on toe and thin strikes without moving to a bigger head. If you love the look of a blade at address but occasionally get punished more than you'd like, the muscle cavity gives you a touch of stability while keeping the compact profile.
Miura MC-502 アイアンは高ハンディキャップのゴルファーに向いていますか?
いいえ。Miura MC-502はボールをしっかり打てるゴルファー向けのプレーヤーズキャビティ設計です。このカテゴリーは一般にハンディキャップ0~12のゴルファーに合います。高ハンディキャップのゴルファーには、ゲームインプルーブメントモデルのほうがやさしく感じられます。
Miura MC-502の代わりになるモデル
ほかのブランドのプレーヤーズキャビティ アイアンのうち、発売年が近いモデルです。