본문으로 건너뛰기

Cobra

Cobra King MIM 웨지

투어 그라인드202046°-60°

The King MIM is Cobra's answer to a question most golfers never ask: how consistent is the wedge you just bought? Most wedge heads are cast, then hand-ground to spec, which means small differences from one head to the next. Cobra built these through metal injection molding, where powdered metal gets pressed into a precise mold under heat and pressure. The result is a head that comes out of production already close to final shape, with tighter tolerances than casting allows.

That matters more than it sounds. When you carry a 50, a 54, and a 58, you want them to feel like siblings, not strangers. The MIM process gives you that. Loft, bounce, and center of gravity land where Cobra intended, wedge after wedge. The multi-material construction adds weight where it helps stability without inflating the head, so these stay compact at address.

Offered from 46 through 60 degrees, the King MIM covers the full gap-to-lob range. This is a players wedge that leans on manufacturing precision rather than forgiveness gimmicks. If you take your short game seriously and want tools that behave predictably, it earns a look.

요약하면

Cobra King MIM (2020) 모델은 그린 주변에서 다양한 샷을 만들 수 있는 투어 그라인드 웨지입니다. 로프트는 46°~60°입니다. 2020년 출시.

Cobra King MIM 웨지: 주요 스펙

카테고리
투어 그라인드
권장 핸디캡 범위
0~10
로프트 범위
46~60도
로프트/그라인드 옵션
7
모델 연도
2020

구매처

각 리테일러의 검색 페이지로 이동합니다. 가격과 재고는 해당 리테일러 기준입니다.

지금 살까, 기다릴까?

구매 또는 대기

곧 신모델 출시 예정

이 카테고리의 브랜드는 보통 2년마다 신모델을 내놓습니다. King MIM 모델은 출시 6년이 지났지만 아직 후속 모델이 없어 언제든 새 모델이 나올 수 있습니다. 지금 재고 정리 가격에 사거나, 몇 주 기다려 어떤 모델이 나오는지 확인해 보세요.

출시 시기와 이 라인의 일반적인 모델 교체 주기를 기준으로 한 판단이며, 실시간 가격 견적이 아닙니다.

구매 가능한 옵션

로프트바운스그라인드마감
46°8°ST크롬
50°9°ST크롬
52°9°ST크롬
54°10°ST크롬
56°10°ST크롬
58°9°ST크롬
60°9°ST크롬

로프트와 바운스는 공칭값입니다. 실제 스펙은 다를 수 있습니다.

기술

단조복합 소재

Cobra King MIM 소개

The Tour grind sole is the story here. It's a versatile shape with relieved heel and toe, so you can open the face for a flop or a bunker shot and the leading edge stays down instead of riding up off the turf. Square it up for a stock full wedge and it sits clean. This grind rewards players who manipulate the face and move the ball around the green rather than hitting every shot the same way. Metal injection molding is the manufacturing headline, but the payoff is feel and repeatability. The dense, uniform head produced by the process gives a soft, solid sensation at impact, and because every head starts from the same mold, the grind and CG are more consistent than hand-finished wedges. The compact profile and thin topline read like a blade at address, which is what better players want looking down on a scoring club.

Cobra King MIM, 누구에게 맞을까요?

  • ✓Mid to low handicap players who shape shots around the green and want a sole that supports an open face.
  • ✓Golfers building a matched wedge set from gap through lob who care about consistent loft and bounce between heads.
  • ✓Players who value a compact, blade-like look and soft feel over max-forgiveness cavity designs.
  • ✓Anyone curious whether MIM construction actually delivers tighter tolerances than a standard cast wedge.

관련 글

자주 묻는 질문

What does MIM mean on the Cobra King MIM wedge?

MIM stands for metal injection molding. Cobra presses powdered metal into a precise mold under heat and pressure, so each head comes out close to final shape with tighter tolerances than casting. The main benefit is consistency, your 54 and 58 are ground and weighted the same way, plus a soft, solid feel at impact.

Is the Tour grind on the King MIM good for bunkers and open-face shots?

Yes. The Tour grind relieves the heel and toe, so when you open the face the leading edge stays close to the turf instead of lifting. That makes greenside flops, bunker shots, and touch shots easier to execute. It's a versatile grind aimed at players who like to manipulate the face.

What lofts does the Cobra King MIM come in?

It's available in 46, 50, 52, 54, 56, 58, and 60 degrees. That range lets you fill your gap wedge slot around 46 to 50, add a 54 or 56 as a sand wedge, and finish with a 58 or 60 for lob shots. Pick spacing of four to six degrees between wedges for even distance gaps.

Is the King MIM a forgiving wedge for higher handicappers?

It's a players wedge, not a game-improvement one. The head is compact with a thin topline and a versatile Tour grind, which rewards clean contact and shot-making more than it hides mishits. Higher handicappers who want maximum forgiveness may prefer a wider-soled, more forgiving design, but golfers with decent short-game skills will appreciate the control.

How is the King MIM different from a standard cast Cobra wedge?

The difference is the manufacturing process. Standard wedges are usually cast and then finished, while the King MIM is built through metal injection molding for tighter tolerances and a denser, more uniform head. In practice you get more consistent bounce, loft, and center of gravity across the set, plus a softer feel than typical cast wedges.

Cobra King MIM 웨지, 하이 핸디캡 골퍼에게 잘 맞나요?

아니요. Cobra King MIM 모델은 볼 스트라이킹이 좋은 골퍼를 위한 투어 그라인드 설계입니다. 이 카테고리는 보통 핸디캡 0~10 골퍼에게 맞습니다. 하이 핸디캡 골퍼에게는 게임 임프루브먼트 모델이 더 관대합니다.

Cobra King MIM 대안 모델

다른 브랜드의 투어 그라인드 웨지 모델 중 출시 연도가 가장 가까운 모델입니다.

Cobra 웨지 더 보기

내 골프백에 맞는 로프트 찾기

갭 파인더로 지금 세트에 맞는 로프트 조합을 확인하세요.

갭 파인더 열기 →