본문으로 건너뛰기

Callaway

Callaway MD3 Milled 웨지

투어 그라인드201548°-60°

The Mack Daddy 3 Milled is Roger Cleveland's wedge, and it plays like a wedge built by someone who has spent decades obsessing over how a ball comes off a face. Callaway offers it across seven lofts from 48 to 60 degrees, so you can build a full short-game setup around one model without mixing feels between your gap, sand, and lob wedges.

What sets the MD3 apart is Groove-in-Groove technology. Between the main grooves, Callaway milled a second set of micro-grooves running at a slight angle to the primary ones. The point is more contact points on the ball at impact, which means more spin, especially on those half and three-quarter shots where you are trying to check a ball up next to a tucked pin. It is not marketing fluff. You can hear and feel the ball grabbing the face.

Progressive lofts and progressive grooves mean this set is not one design stretched across seven heads. Lower lofts get narrower, deeper grooves for full-swing control. Higher lofts get wider, shallower grooves tuned for spin around the greens. If you play a 48 and a 60 out of this family, each one is optimized for the shots you actually hit with it.

요약하면

Callaway MD3 Milled (2015) 모델은 그린 주변에서 다양한 샷을 만들 수 있는 투어 그라인드 웨지입니다. 로프트는 48°~60°입니다. 2015년 출시.

Callaway MD3 Milled 웨지: 주요 스펙

카테고리
투어 그라인드
권장 핸디캡 범위
0~10
로프트 범위
48~60도
로프트/그라인드 옵션
7
모델 연도
2015

구매처

각 리테일러의 검색 페이지로 이동합니다. 가격과 재고는 해당 리테일러 기준입니다.

지금 살까, 기다릴까?

구매 또는 대기

곧 신모델 출시 예정

이 카테고리의 브랜드는 보통 2년마다 신모델을 내놓습니다. MD3 Milled 모델은 출시 11년이 지났지만 아직 후속 모델이 없어 언제든 새 모델이 나올 수 있습니다. 지금 재고 정리 가격에 사거나, 몇 주 기다려 어떤 모델이 나오는지 확인해 보세요.

출시 시기와 이 라인의 일반적인 모델 교체 주기를 기준으로 한 판단이며, 실시간 가격 견적이 아닙니다.

구매 가능한 옵션

로프트바운스그라인드마감
48°10°S크롬
50°10°S크롬
52°10°S크롬
54°10°S크롬
56°10°S크롬
58°10°S크롬
60°10°S크롬

로프트와 바운스는 공칭값입니다. 실제 스펙은 다를 수 있습니다.

기술

단조프로그레시브 로프트

Callaway MD3 Milled 소개

The MD3 Milled is forged and then CNC milled on the face and grooves, which is why the shorthand name includes Milled. Milling the face gives Callaway tight tolerances groove to groove, and the forged carbon steel head delivers the soft, dense feel that better players want to hear on a delicate flop or a firm spinner. This is a players wedge in look and feel, with a compact head, thin topline, and minimal offset. Grind options were the other half of the story. Depending on loft you could get an S grind for versatility, a C grind with heel and toe relief for players who open the face and manipulate the club, or a W grind with more bounce for softer conditions and steeper attack angles. Matching the grind to your turf and your swing is the difference between a wedge that digs and one that glides.

Callaway MD3 Milled, 누구에게 맞을까요?

  • ✓Mid to low handicappers who take a full or partial swing and want the ball to check on the second bounce.
  • ✓Players who want a matched set of wedges from gap through lob rather than a single hero club.
  • ✓Anyone who opens the face and works shots around the green and needs a grind that lets the club slide instead of dig.
  • ✓Golfers who prioritize spin and feel from forged carbon steel over the durability of a plated cast wedge.

관련 글

자주 묻는 질문

What is Groove-in-Groove technology on the MD3 Milled?

It is a second set of micro-grooves milled between the main grooves, angled slightly against them. The extra edges create more contact with the ball at impact, which adds spin on partial and open-face shots where you need the ball to stop quickly.

What grind should I get in the Callaway MD3 Milled?

It depends on your turf and technique. The S grind is the versatile all-rounder for neutral conditions. The C grind has heel and toe relief and suits players who open the face and hit a lot of finesse shots. The W grind carries more bounce and works better in soft turf and bunkers or if you have a steep angle of attack.

Is the MD3 Milled forged or cast?

It is forged from carbon steel with a milled face and grooves. The forging gives it the soft feel better players look for, and the milling keeps the grooves consistent for predictable spin.

Which lofts does the MD3 Milled come in and how should I set up my wedges?

It runs from 48 to 60 degrees in the 48, 50, 52, 54, 56, 58, and 60 options. Most players carry three or four wedges spaced about four degrees apart, for example a 50, 54, and 58, so you cover your gaps without leaving an awkward yardage between clubs.

Is the MD3 Milled a good wedge for higher handicappers?

It can be, but it is built for players who make consistent contact. This is a compact players wedge with a thin topline and less bounce in the lower-loft grinds. If you tend to hit it thin or fat, a wider-soled game-improvement wedge will be more forgiving, though you give up some of the feel and spin the MD3 delivers.

Callaway MD3 Milled 웨지, 하이 핸디캡 골퍼에게 잘 맞나요?

아니요. Callaway MD3 Milled 모델은 볼 스트라이킹이 좋은 골퍼를 위한 투어 그라인드 설계입니다. 이 카테고리는 보통 핸디캡 0~10 골퍼에게 맞습니다. 하이 핸디캡 골퍼에게는 게임 임프루브먼트 모델이 더 관대합니다.

Callaway MD3 Milled 대안 모델

다른 브랜드의 투어 그라인드 웨지 모델 중 출시 연도가 가장 가까운 모델입니다.

Callaway 웨지 더 보기

내 골프백에 맞는 로프트 찾기

갭 파인더로 지금 세트에 맞는 로프트 조합을 확인하세요.

갭 파인더 열기 →