요약하면
Orka Arc Milled (2024) 모델은 아크형 스트로크를 하는 골퍼에게 맞는 블레이드 퍼터입니다. 풀 토행 퍼터입니다. 출시가(MSRP)는 $275입니다.
블레이드 퍼터
Orka isn't a name you'll see in a big-box store, and that's kind of the point. The Arc Milled is a blade built by a small UK outfit that leans hard into custom fitting, and this 2024 version is a milled putter for players who swing the putter on a real arc. If you take the head back inside and rotate the face open and closed, this is the geometry that matches how you already move.
The full toe hang is the headline. Balance this putter on your finger and the toe drops straight to the ground, which tells you it wants to rotate through impact. That's a good thing if you're a strong-arc putter and a problem if you're a straight-back-straight-through mechanic. This is not a forgiving mallet trying to hold the face square for you. It's a tool that rewards a stroke that already works.
No sightline sits on top. The topline is clean, and Orka trusts you to aim with the shape of the head instead of a painted line. Some golfers hate that. Others have spent years fighting alignment aids that don't match where their eyes actually point the ball, and for them a blank flange is a relief.
디자인
The Arc Milled is machined from a solid block, and you feel it the moment you set it down. Milled faces give you that firm, consistent contact where a putt struck slightly off center still rolls close to a pure one, because the face flatness is held tight across the whole hitting area. The blade profile keeps the head compact, so it frames the ball rather than swallowing it. Full toe hang comes from where the shaft meets the head and how the weight sits behind the face. The design pushes the center of gravity toward the toe relative to the shaft axis, which is what makes the face open and close naturally on an arc. With no alignment aid to lean on, Orka keeps the crown quiet and lets the leading edge and the overall silhouette do the aiming work.
이런 골퍼에게 맞습니다
- You have a noticeable arc in your stroke, taking the putter inside on the way back and rotating the face through the ball.
- You aim better with a clean topline than with a painted sightline, or you've never trusted the lines on stock putters.
- You want milled feel and consistency and you're willing to pay for a small-batch build rather than a mass-produced head.
- You're getting fit rather than buying blind, since toe hang and length matter a lot with a head this specific.
- A straight-back-straight-through putter should look elsewhere, because full toe hang will fight that motion all day.
기술
Orka 소개
Orka 브랜드는 좋은 소재, 정밀한 제조, 성능 중심의 엔지니어링에 집중하며 퍼터 설계에 독자적인 접근을 보여 줍니다.
스펙
| 브랜드 | Orka |
| 모델 | Arc Milled |
| 연도 | 2024 |
| 유형 | 블레이드 |
| 토행 | 풀 토행 |
| 정렬 보조선 | 아니요 |
| MSRP | $275 |
자주 묻는 질문
- Is the Orka Arc Milled good for an arc putting stroke?
- Yes, that's exactly who it's built for. Full toe hang means the face wants to open and close as you swing, which matches a stroke that travels inside and rotates. If you putt straight back and straight through, a face-balanced or minimal-toe-hang putter will suit you better.
- Why does this putter have no alignment line?
- Orka leaves the topline clean on purpose. A lot of golfers aim more accurately to the shape of the head than to a painted line, especially if their eyes don't sit directly over the ball. If you rely on a sightline to square up, this blank flange will take some adjustment.
- What does milled construction actually get you?
- A face machined from solid metal holds its flatness tightly, so contact feels firm and consistent and mishits roll out closer to center strikes. You also get a denser, more solid feel at impact than you'd get from an insert or a cast head.
- How do I know if full toe hang is right for me?
- Balance the putter on one finger. If the toe drops to the floor, that's full toe hang, and it fits a rotating arc stroke. The quicker check is your own tendency: if you tend to push putts, a strong-toe-hang blade can help the face release. A proper fitting settles it.
- Is Orka a custom putter brand?
- Orka is a small maker that builds around fitting rather than pushing one stock spec. The Arc Milled is a specific geometry aimed at arc putters, so it's worth getting the length, lie, and loft dialed in rather than buying it off a shelf and hoping the numbers match your stroke.
Orka Arc Milled 대안 모델
다른 브랜드의 블레이드 퍼터 모델 중 출시 연도가 가장 가까운 모델입니다.
Orka 제품 더 보기
구매처
각 리테일러의 검색 페이지로 이동합니다. 가격과 재고는 해당 리테일러 기준입니다.
이 퍼터를 내 골프백에 추가