본문으로 건너뛰기

드라이버 / TaylorMade

TaylorMade M3 드라이버

2018플레이어스 디스턴스460cc조절 가능$499부터

요약하면

TaylorMade M3 (2018) 모델은 스피드와 관용성의 균형을 맞춘 플레이어스 디스턴스 드라이버입니다. 로프트는 9°~12°, 헤드 크기는 460cc이며 호젤 조절이 가능합니다. 2018년 출시. 출시가(MSRP)는 $499입니다.

TaylorMade M3 드라이버: 주요 스펙

카테고리
플레이어스 디스턴스
권장 핸디캡 범위
5~15
헤드 크기
460cc
조절 가능
예
로프트 옵션
9~12도
모델 연도
2018
MSRP
$499

구매처

각 리테일러의 검색 페이지로 이동합니다. 가격과 재고는 해당 리테일러 기준입니다.

지금 살까, 기다릴까?

구매 또는 대기

곧 신모델 출시 예정

이 카테고리의 브랜드는 보통 2년마다 신모델을 내놓습니다. M3 모델은 출시 8년이 지났지만 아직 후속 모델이 없어 언제든 새 모델이 나올 수 있습니다. 지금 재고 정리 가격에 사거나, 몇 주 기다려 어떤 모델이 나오는지 확인해 보세요.

출시 시기와 이 라인의 일반적인 모델 교체 주기를 기준으로 한 판단이며, 실시간 가격 견적이 아닙니다.

판매 또는 중고 보상 판매

예상가

출시가 $499와 출시 8년차 출시를 기준으로 산출 (출시가의 약 20%가 중고가로 유지).

중고 시세

$85 - $110

개인 거래, 보통~최상 상태

중고 보상 판매가

$50 - $75

매장에서 보통 매입하는 가격

정확한 견적 받기

감가 모델에 따른 추정치이며 실시간 견적이 아닙니다. 실제 금액은 상태·샤프트·수요에 따라 달라지므로 위 사이트에서 “TaylorMade M3”을 검색해 확인하세요.

로프트 옵션 및 순정 샤프트

로프트샤프트강도무게킥 포인트토크
9.0°Mitsubishi Tensei AV Blue Mitsubishi Tensei AV Blue 65스티프65g미드3.5°
10.5°Mitsubishi Tensei AV Blue Mitsubishi Tensei AV Blue 65스티프65g미드3.5°
12.0°Mitsubishi Tensei AV Blue Mitsubishi Tensei AV Blue 55레귤러55g미드3.8°

기술

고탄도

플레이어스 디스턴스 드라이버

The M3 was TaylorMade's 2018 answer for players who want to shape shots but still care about ball speed on mishits. This is the driver that introduced Twist Face, the corrected face geometry that curves loft and face angle differently in the high-toe and low-heel areas where most golfers actually catch the ball. The idea is simple. Your bad swings tend to miss in predictable spots, so the face is built to fight the slice and hook those spots normally produce.

At 460cc with an adjustable hosel and a Y-Track weighting system, the M3 sits between a pure game-improvement club and a tour head. You get real tuning options without giving up much forgiveness. Two 11-gram weights slide along a Y-shaped track on the sole, letting you push toward more draw bias, more fade bias, or a neutral setting that favors low spin and distance. Most drivers of this era gave you one sliding weight. TaylorMade gave you two and more ways to combine them.

The High Launch tag fits how this head plays for a lot of golfers. The Hammerhead slot in the sole keeps the face flexible low, which helps launch and protects ball speed on strikes hit thin or toward the bottom groove. Pair that with a loft sleeve and you can dial trajectory up or down depending on your delivery.

  • Mid-handicap players who want adjustability and are willing to spend time dialing in the Y-Track weights rather than leaving them at a factory setting.
  • Golfers who tend to miss high on the toe or low on the heel and want the Twist Face geometry working to straighten those specific misses.
  • Anyone who launches the ball a little low off the driver and needs help getting it up without teeing it forward or swinging out of their shoes.
  • Players moving up from a forgiving game-improvement driver who want more shot-shaping control but not a small tour head.
  • Tinkerers who like having a loft sleeve and two movable weights to test different setups on the range.

자주 묻는 질문

What is the difference between the TaylorMade M3 and M4 from 2018?
Both share Twist Face and the Hammerhead slot, but the M3 has the adjustable Y-Track weighting and an adjustable loft sleeve for shot shaping and CG tuning. The M4 is a single, fixed setup built purely for forgiveness. If you want to tinker and shape shots, the M3 is the one. If you want to set it and forget it, the M4 is simpler and cheaper.
How does Twist Face actually help my drives?
Twist Face changes the loft and face angle in the areas where golfers commonly mishit, the high toe and low heel. High-toe strikes launch a bit lower with less hook spin, and low-heel strikes launch higher with less slice spin. The result is that your typical off-center misses fly straighter and closer to your target than they would off a flat face.
What loft options does the M3 460 come in?
The M3 460 was offered in 9, 10.5, and 12 degrees, and the adjustable hosel lets you move each head roughly two degrees up or down from its stamped loft. That means you can fine-tune trajectory well beyond the base number, so pick the head closest to your target loft and adjust from there.
Is the M3 a forgiving driver for higher handicaps?
It is forgiving enough for many mid-handicappers, especially with the weights set back and split for stability. It is not as automatically forgiving as the M4 or a dedicated game-improvement head, because the adjustability lets you put the CG in less stable positions. Set the Y-Track for a neutral, back weighting and it plays plenty stable.
How should I set the Y-Track weights on the M3?
Start neutral with the weights split evenly, which favors low spin and distance. If you fight a slice, slide both toward the heel to add draw bias. If you tend to hook, move them toward the toe. Sliding weight back and away from the face raises launch and adds stability. The best approach is to test a few settings on a launch monitor and read the spin and shape numbers.
TaylorMade M3 드라이버, 하이 핸디캡 골퍼에게 잘 맞나요?
조건부로 가능합니다. TaylorMade M3 모델은 플레이어스 디스턴스 설계입니다. 이 카테고리는 보통 핸디캡 5~15 골퍼에게 맞습니다. 핸디캡 20 이상이라면 게임 임프루브먼트 모델에서 더 많은 도움을 받습니다.

관련 글

TaylorMade M3 대안 모델

다른 브랜드의 플레이어스 디스턴스 드라이버 모델 중 출시 연도가 가장 가까운 모델입니다.

TaylorMade 드라이버 더 보기

내 스윙에 맞는 드라이버 찾기

드라이버 파인더 사용하기 →