요약하면
Srixon ZXi LS (2025) 모델은 스윙 스피드가 빠른 골퍼를 위한 저스핀, 컨트롤형 드라이버입니다. 로프트는 8.5°~10.5°, 헤드 크기는 440cc이며 호젤 조절이 가능합니다. 2025년 출시. 출시가(MSRP)는 $549입니다.
Srixon ZXi LS 드라이버: 주요 스펙
- 카테고리
- 투어
- 권장 핸디캡 범위
- 0~8
- 헤드 크기
- 440cc
- 조절 가능
- 예
- 로프트 옵션
- 8.5~10.5도
- 모델 연도
- 2025
- MSRP
- $549
구매처
각 리테일러의 검색 페이지로 이동합니다. 가격과 재고는 해당 리테일러 기준입니다.
지금 살까, 기다릴까?
구매하기 좋은 시기가성비 최적 시기
출시 약 1년이 지나 첫 본격 할인이 시작됐고, 후속 모델은 아직 6~18개월 뒤입니다. 구형 느낌 없이 가성비가 뛰어납니다.
출시 시기와 이 라인의 일반적인 모델 교체 주기를 기준으로 한 판단이며, 실시간 가격 견적이 아닙니다.
판매 또는 중고 보상 판매
예상가출시가 $549와 출시 1년차 출시를 기준으로 산출 (출시가의 약 55%가 중고가로 유지).
중고 시세
$255 - $340
개인 거래, 보통~최상 상태
중고 보상 판매가
$155 - $240
매장에서 보통 매입하는 가격
중고 매물: Golf Partner USA에서 $187 (11월 16일 기준)
정확한 견적 받기
감가 모델에 따른 추정치이며 실시간 견적이 아닙니다. 실제 금액은 상태·샤프트·수요에 따라 달라지므로 위 사이트에서 “Srixon ZXi LS”을 검색해 확인하세요.
로프트 옵션 및 순정 샤프트
| 로프트 | 샤프트 | 강도 | 무게 | 킥 포인트 | 토크 |
|---|---|---|---|---|---|
| 8.5° | Mitsubishi Diamana D 60 | 스티프 | 60g | 미드 | 4.0° |
| 9.5° | Mitsubishi Diamana D 60 | 스티프 | 60g | 미드 | 4.0° |
| 10.5° | Mitsubishi Diamana D 60 | 스티프 | 60g | 미드 | 4.0° |
투어 드라이버
The Srixon ZXi LS is a 2025 tour driver built around one premise: get the spin down without sacrificing distance. At 440cc, the head is noticeably smaller than the standard ZXi, and that difference is intentional. Srixon made it for players who already generate their own speed and need a driver that won't fight them with a high, ballooning ball flight.
What separates the LS from the base ZXi is the whole package working together. A more compact shape promotes a flatter, penetrating trajectory. Pair that with the adjustable hosel and you have a driver that can be precisely dialed into whatever launch conditions your swing demands. Tour players and scratch golfers reach for this one specifically because the standard version just spins too much for their swing speed.
- Single-digit handicaps who spin the ball too high with conventional 460cc drivers and want to bring their trajectory down without changing shafts.
- Players who like to shape shots and need a compact head that responds cleanly to intentional face angle adjustments.
- High-swing-speed golfers, typically 105 mph or faster, who are leaving distance on the table because their spin rate is too high.
자주 묻는 질문
- What's the difference between the Srixon ZXi LS and the standard ZXi?
- The LS runs a 440cc head versus the standard ZXi's 460cc. That smaller volume trims spin, tightens dispersion for better players, and gives the driver a more workable feel through the ball. The tradeoff is forgiveness: the LS punishes big misses more than the standard model does.
- What loft options does the ZXi LS come in?
- The ZXi LS is available in 9° and 10.5°. With the adjustable hosel you can move either setting up or down by two degrees, which gives you an effective range from roughly 7° to 12.5° depending on which head you start with.
- Is the ZXi LS a good fit for mid-handicappers?
- Probably not. The 440cc head and low-spin profile reward players who already have consistent mechanics and higher swing speeds. Mid-handicappers tend to get better results from the standard ZXi, which offers more forgiveness and a slightly higher launch to help with carry distance.
- How does the adjustable hosel on the ZXi LS work?
- A single-screw sleeve system rotates into different loft and face angle positions. You get up to two degrees of loft adjustment in either direction, plus a draw setting that closes the face slightly at address. Srixon includes the Torx wrench in the box.
- What swing speed is the ZXi LS built for?
- Srixon targets this driver at players swinging 100 mph or faster. Below that threshold, the low-spin design tends to cost more distance than it gains because you need some spin to keep the ball airborne. At 105 mph and above, pairing it with the right shaft becomes the most important variable.
- Srixon ZXi LS 드라이버, 하이 핸디캡 골퍼에게 잘 맞나요?
- 아니요. Srixon ZXi LS 모델은 볼 스트라이킹이 좋은 골퍼를 위한 투어 설계입니다. 이 카테고리는 보통 핸디캡 0~8 골퍼에게 맞습니다. 하이 핸디캡 골퍼에게는 게임 임프루브먼트 모델이 더 관대합니다.
관련 글
Srixon ZXi LS 대안 모델
다른 브랜드의 투어 드라이버 모델 중 출시 연도가 가장 가까운 모델입니다.
Srixon 드라이버 더 보기
내 스윙에 맞는 드라이버 찾기
드라이버 파인더 사용하기 →