Cleveland HB Soft 2 #10.5 パター

Mallet Putter

Cleveland's HB Soft 2 #10.5 is the putter for golfers who want mallet stability without the putter looking like a piece of lab equipment. Call it a mid-mallet. It has a rounded back flange that extends behind a squared-off top line, so the footprint is bigger than a blade but nowhere near the width of a full wing mallet. Sole it behind the ball and your eye reads it as a heavy blade that happens to have more mass out back.

The face is where this model earns its name. Cleveland mills a variable groove pattern into it, cutting deeper grooves through the middle of the face and shallower ones toward the heel and toe, so a strike off the toe leaves the putter head with more effective loft and grab than it otherwise would. The practical result is that your bad putts roll closer to the distance of your good ones. Feel is genuinely soft off the face, which some golfers love and some find a little muted on quick greens.

One thing to know before you buy: there is no alignment line on this head. No white bar, no dots, no wings drawn on the flange. You aim it with the shape itself, using the top line and the edges of the flange to frame the ball. Golfers who trust their eye tend to prefer that. Golfers who need a line to commit to a start line should look at a different model in the family.

デザイン

The 10.5 head shape is a rounded rear extension off a fairly traditional blade profile, which pushes weight back and slightly out without widening the footprint much at address. That combination gives it real forgiveness on heel and toe misses while keeping the head small enough to sit quietly behind the ball. Weight distribution and hosel geometry leave it with mid toe hang, so the face wants to rotate a moderate amount through the stroke rather than staying square the whole way. Surface treatment is where Cleveland separates this from a plain milled putter. Variable depth grooves across the face keep ball speed consistent from center to perimeter, and the milling also softens impact sound compared to a bare stainless face. The top line is clean and unadorned, with the deck of the head doing the aiming work through its symmetry. Finish is understated rather than flashy, and glare off the top at address is minimal.

Who It's For

• You have a slight arc in your stroke and the face naturally opens and closes a bit. Mid toe hang matches that motion instead of fighting it.
• You want more stability than a blade gives but find full mallets distracting to look at.
• You aim by shape and feel, not by lining up a painted stripe.
• You leave putts short and want mishits off the toe to travel closer to full distance.
• You prefer a soft, quiet impact over a firm click, especially on medium to slower greens.

テクノロジー

About Cleveland

Cleveland brings their wedge expertise to putters, focusing on feel and short-game scoring. Their Speed Optimized Face Technology creates consistent ball speed across the face.

スペック

よくある質問

Is the HB Soft 2 #10.5 good for a straight back, straight through stroke?

Not really the best match. Mid toe hang means the head wants to rotate through impact, and if you hold the face square through the stroke you will fight that. Someone with a true straight stroke is better served by a face balanced mallet from the same line. If your stroke has any arc at all, even a small one, the 10.5 will feel natural.

Why doesn't it have an alignment line?

Cleveland leaves the top of the 10.5 clean on purpose. The idea is that the head shape and its symmetry give you enough visual reference, and some golfers aim better without a line pulling their eye. Whether that works for you is personal. Set one down on a putting green with a chalk line and see if you aim it straight. If you consistently aim right or left without a sightline, that is useful information.

How does the 10.5 compare to the bigger mallet shapes in the HB Soft 2 line?

The larger mallets in the family have wider bodies and more pronounced wings, which pushes forgiveness higher and usually reduces face rotation. The 10.5 sits between those and a blade. You give up some of the raw stability of a big mallet and get back a smaller, more traditional look plus a stroke fit that suits arc putters.

What does the variable groove milling actually do?

Grooves are cut deeper in the center of the face and shallower toward the heel and toe. Off center strikes normally lose ball speed, so shallower grooves out there let the ball come off a little hotter than it otherwise would, and the deeper center grooves take a bit off the sweet spot. The gap between your best and worst putt narrows on distance. It will not fix a badly pulled putt, but the speed control on mishits improves.

Does it feel too soft on fast greens?

Some golfers think so. Milled face plus the softer feel of this line means less audible and tactile feedback, and on greens rolling 12 or faster a few players want a firmer sensation to help them touch the ball. If you play fast greens and like knowing exactly where you struck it, hit some putts with it before committing. On average club greens the softness is a benefit for most people.

Alternatives to the Cleveland HB Soft 2 #10.5

Other mallet putter models from different brands, closest to its model year.

More from Cleveland