The AP2 716 was Titleist's answer for the better player who wants some help without giving up looks or feel. It's a forged players cavity iron, which means a compact head and thin topline up top, but with just enough cavity behind the face to keep off-center hits from falling apart. Sit it down behind the ball and it looks like a blade. Hit it thin on the toe and it behaves a little better than a blade would.
What sets this set apart is the tungsten. Titleist co-forged high-density tungsten into the toe and heel of the long irons, which pushes the center of gravity where it needs to be and bumps up the moment of inertia in the clubs that need it most. Your 3, 4, and 5 iron get real help getting the ball up and holding a line. The short irons stay compact and workable, the way a good player wants them.
This was one of the most played irons on tour for a reason. It's not the longest iron in its class and it doesn't try to be. The 34 degree 7-iron loft is honest, and the ball flight is what you'd expect from a forged players iron, controlled and predictable rather than launched into orbit.
要点
The Titleist AP2 716 (2016) is a players cavity that adds forgiveness without much extra size. The set runs 3-iron to PW with a 34° 7-iron. It carries a $1,099 MSRP.
Titleist AP2 716 アイアン: 主要スペック
- カテゴリ
- プレーヤーズキャビティ
- セット構成
- 3-iron to PW
- 7-iron loft
- 34 degrees
- ロフト範囲
- 21 to 46 degrees
- モデル年式
- 2016
- MSRP
- $1099
今買うべきか、待つべきか？
買うか待つかRefresh due soon
Brands in this category update about every 2 years, and the AP2 716 is 10 years old with no successor yet, so a new model could land any time. Grab it at clearance pricing now, or wait a few weeks to see what replaces it.
Based on release timing and this line's typical refresh cycle, not a live price quote.
売却・下取りに出す
見積もりModeled from the $1,099 original MSRP and a 10-year-old release (about 12% of MSRP retained used).
中古市場価格
$110 - $150
Private sale, fair to like-new
下取り価格
$65 - $105
ショップの一般的な買取価格
正確な見積もりを取得
Estimate only, from a depreciation model, not a live quote. Search “Titleist AP2 716” on the sites above for the real number, which varies with condition, shaft, and demand.
ロフトスペック
| 3i | 4i | 5i | 6i | 7i | 8i | 9i | PW |
|---|---|---|---|---|---|---|---|
| 21.0° | 23.0° | 26.0° | 30.0° | 34.0° | 38.0° | 42.0° | 46.0° |
Stock steel shaft. Lofts are approximate and subject to manufacturing tolerances.
Titleist AP2 716: expected carry distances
Typical carry by swing speed, adjusted for this set's actual lofts. Your numbers will vary with strike, shaft, and conditions.
| クラブ | ロフト | Moderate swing~130y 7-iron | Average swing~145y 7-iron | Faster swing~159y 7-iron |
|---|---|---|---|---|
| 3-iron | 21° | 162 y | 181 y | 199 y |
| 4-iron | 23° | 154 y | 172 y | 189 y |
| 5-iron | 26° | 147 y | 164 y | 180 y |
| 6-iron | 30° | 139 y | 155 y | 170 y |
| 7-iron | 34° | 130 y | 145 y | 159 y |
| 8-iron | 38° | 121 y | 135 y | 148 y |
| 9-iron | 42° | 111 y | 124 y | 136 y |
| PW | 46° | 102 y | 114 y | 125 y |
Carry distances are modeled from TrackMan-based norms scaled to each club's loft, not measured for this exact model.
テクノロジー
About the Titleist AP2 716
The head is forged from 1025 carbon steel, and the tungsten weighting is co-forged rather than glued or screwed in, so the whole thing feels like one solid piece at impact. Titleist ran progressive lofts and progressive CG through the set, so the long irons are built for launch and forgiveness while the scoring clubs are built for control. The blade length, topline thickness, and offset all shrink as you move down the set. Sole width is on the thinner side and the offset is minimal, which is what you want if you like to shape shots and take a shallow divot. This is not a chunky, dig-resistant sole. It rewards a decent strike and a repeatable low point, and it lets you work the ball both directions without fighting the club.
ロフト分析
The Titleist AP2 716's 7-iron is lofted at 34° - traditional - aligned with classic iron loft standards. For a golfer with an 85-95 mph swing speed, this projects to a 7-iron carry of approximately 136-146 yards. The 5-iron (26°) to 7-iron gap of 8° is spread across a wide range, which may create overlapping distance windows with similarly lofted fairway woods or hybrids. The pitching wedge at 46° is traditionally lofted, pairing naturally with a standard 52° gap wedge.
Who Should Play the Titleist AP2 716?
- ✓Single-digit and low-teens handicaps who want a forged players iron with a small safety net in the long irons.
- ✓Ball strikers who care about how an iron looks at address and want a thin topline and minimal offset.
- ✓Players moving out of blades who still want to shape shots but would like the 3 and 4 iron to be more playable.
- ✓Anyone who values feel and control over raw distance and doesn't need jacked-up lofts to hit greens.
よくある質問
Is the AP2 716 a players iron or a game improvement iron?
It's a players cavity iron, which sits between a blade and a game improvement club. The head is compact with a thin topline and minimal offset like a players iron, but the cavity and tungsten weighting give you more forgiveness than a true blade. It's built for better players, not high handicappers looking for maximum help.
What loft is the AP2 716 7-iron?
The 7-iron is 34 degrees, which is a traditional players iron loft. It runs about two to four degrees weaker than the strong-lofted game improvement irons from the same era, so you get a natural, controlled ball flight instead of distance from delofting.
Why does the AP2 716 have tungsten in it?
Titleist co-forged high-density tungsten into the toe and heel of the long irons, from the 3-iron through the 7-iron. It lets them position the center of gravity low and raise the moment of inertia in the clubs that are hardest to hit, so your long irons launch higher and stay more stable on off-center strikes without changing the compact shape.
How does the AP2 716 compare to the AP2 714?
The 716 kept the same players cavity concept but added more high-density tungsten, which improved long iron forgiveness and CG placement. Feel and sound got a small refinement too. If you liked the 714, the 716 is a familiar shape with a bit more help in the long irons.
Is the AP2 716 forgiving enough for a mid handicapper?
It can work for a mid handicapper who strikes the ball well, but it's not a set-and-forget forgiving iron. The sole is thin, the offset is minimal, and it rewards a clean strike. If you fight fat and thin shots, a wider-soled game improvement iron will treat you better.
評価とレビュー
No ratings yet. Sign in to rate this club.
Alternatives to the Titleist AP2 716
Other プレーヤーズキャビティ iron models from different brands, closest to its model year.
More Titleist アイアン
See How These Irons Fit Your Game
Use as your baseline in the recommendation tool, or compare side-by-side with another set.