The VIP name carries more weight at MacGregor than anywhere else in the catalog. This is the badge Jack Nicklaus played for most of his major wins, and by 2010 the company was leaning on that history hard. The VIP 1025 is a players cavity iron forged from 1025 carbon steel, which is where the model number comes from. No tungsten plugs, no multi-material inserts, just a soft carbon steel head with a shallow cavity milled into the back.
By 2010 MacGregor had been through the wringer. The Golfsmith acquisition in 2009 pulled the brand out of the green-grass and premium retail channels, so these irons never got the shelf space or tour presence they might have earned a decade earlier. That matters for you as a buyer, because the VIP 1025 sells used at prices well below comparable forgings from Mizuno or Titleist of the same era.
The iron itself holds up. A compact blade length, a thinner topline than a game improvement set, and modest offset put it firmly in the better-player category. The cavity gives you a little help on thin strikes, but this is a club built for people who find the center of the face more often than not.
要点
MacGregor Golf VIP 1025 (2010年) はサイズをあまり大きくせずにやさしさを加えたプレーヤーズキャビティアイアンです。セット構成は3番アイアン~PWで、7番アイアンのロフトは35°です。2010年発売。
MacGregor Golf VIP 1025 アイアン: 主要スペック
- カテゴリ
- プレーヤーズキャビティ
- 目安ハンディキャップ
- 0~12
- セット構成
- 3番アイアン~PW
- 7番アイアンのロフト
- 35度
- ロフト範囲
- 21~47度
- モデル年式
- 2010
購入先
各ショップの検索ページを開きます。価格と在庫は各ショップのものです。
今買うべきか、待つべきか?
今すぐ買う旧モデルのお買い得品
後継のVIP (2022年) がすでに発売されているため、VIP 1025は在庫処分価格で販売されています。最新技術にこだわらないなら、賢い選択です。
発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。
MacGregor Golf VIP 1025: アイアンの系譜
MacGregor GolfのこのシリーズはVIP 1025 (2010年) からVIP (2022年) まで全2世代で、VIP 1025は1世代目です。このシリーズの最初のモデルです。後継モデルはVIP (2022年) です。
- 2010VIP 1025このモデル
ロフトスペック
MacGregor Golf VIP 1025の7番アイアンのロフトは35度です。セット構成は3番アイアン~PWです。ハンディキャップ0~12のゴルファーに合います。
| クラブ | ロフト |
|---|---|
| 3i | 21° |
| 4i | 24° |
| 6i | 31° |
| 7i | 35° |
| 8i | 39° |
| 9i | 43° |
| PW | 47° |
データの範囲は3i~PW (7本) です。MacGregor Golfがこのセットに追加のクラブ (例: ギャップウェッジ) を用意していても、まだデータには入っていません。
VIP 1025 クラブ別ロフト
- MacGregor Golf VIP 1025 3番アイアンのロフト: 21度
- MacGregor Golf VIP 1025 4番アイアンのロフト: 24度
- MacGregor Golf VIP 1025 6番アイアンのロフト: 31度
- MacGregor Golf VIP 1025 7番アイアンのロフト: 35度
- MacGregor Golf VIP 1025 8番アイアンのロフト: 39度
- MacGregor Golf VIP 1025 9番アイアンのロフト: 43度
- MacGregor Golf VIP 1025 ピッチングウェッジのロフト: 47度
純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。
メーカーのスペックページ(アーカイブ)で確認したロフト (2026年11月15日)
MacGregor Golf VIP 1025: 予想キャリー距離
ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。
| クラブ | ロフト | ゆっくりめのスイング7番アイアン 約128y | 平均的なスイング7番アイアン 約143y | 速めのスイング7番アイアン 約157y |
|---|---|---|---|---|
| 3番アイアン | 21° | 159 y | 178 y | 196 y |
| 4番アイアン | 24° | 151 y | 169 y | 186 y |
| 6番アイアン | 31° | 136 y | 152 y | 167 y |
| 7番アイアン | 35° | 128 y | 143 y | 157 y |
| 8番アイアン | 39° | 119 y | 133 y | 146 y |
| 9番アイアン | 43° | 109 y | 122 y | 134 y |
| PW | 47° | 100 y | 112 y | 123 y |
キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。
MacGregor Golf VIP 1025について
Forged 1025 mild carbon steel is the whole story here. It is one of the softer steels used in iron heads, and it gives the VIP 1025 the dense, quiet feel at impact that better players tend to chase. The cavity is shallow, so the mass stays close to the face rather than being pushed to the extreme perimeter. You get workability and feedback first, forgiveness second. Cosmetically it follows the classic VIP formula. Clean chrome, minimal badging, a straight leading edge, and a topline that looks at home behind the ball for anyone who grew up on traditional shapes. There is nothing on this head that dates it badly, which is more than you can say for a lot of irons from 2010.
ロフト分析
MacGregor Golf VIP 1025の7番アイアンのロフトは35°で、従来どおりで、クラシックなアイアンのロフト基準に沿っています。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約133~143ヤードと見込まれます。5番アイアン(24°)と7番アイアンのロフト差は11°で、間隔は広めです。ロフトの近いフェアウェイウッドやハイブリッドと距離が重なる可能性があります。ピッチングウェッジのロフトは47°で、従来どおりのロフトで、標準的な52°のギャップウェッジと自然に組み合わせられます。
MacGregor Golf VIP 1025はどんな人に向いている?
- ✓Single-digit and low-teens handicaps who want forged feel without paying current Mizuno or Titleist prices.
- ✓Players who shape shots on purpose and want an iron that responds to face manipulation instead of fighting it.
- ✓Collectors and value hunters drawn to the Nicklaus-era VIP lineage, since clean used sets are cheap relative to what the build quality delivers.
- ✓Anyone downsizing from a chunky game improvement set who still wants a small safety net from the cavity.
関連記事
よくある質問
Are the MacGregor VIP 1025 irons forged or cast?
Forged. The model number refers to the 1025 carbon steel used in the head, a soft mild steel that shows up in plenty of premium Japanese forgings. That is the main selling point of this iron.
Are the VIP 1025 irons forgiving enough for a mid handicapper?
Somewhat, with a caveat. The cavity back gives you more help than a true blade, but the head is compact and the sweet spot is not generous by modern standards. A 12 to 15 handicap with solid contact can play them. An 18 handicap fighting thin and toe strikes will pay for it.
Is a used set of VIP 1025 irons worth buying in good condition?
If the grooves and faces are healthy, yes. These sell for a fraction of what equivalent-era forged players cavities from bigger brands cost, and soft carbon steel does not lose feel with age. Check for heavy wear at the sweet spot and rust in the cavity, and budget for fresh grips.
What happened to MacGregor after these irons came out?
Golfsmith bought MacGregor in 2009 and the brand shifted away from premium equipment toward value lines sold through big retail. The VIP 1025 sits at the tail end of MacGregor's serious players club era, which is part of why it flew under the radar.
Can the VIP 1025 heads be bent for loft and lie adjustments?
Yes, and easily. Soft 1025 carbon steel is about as bend-friendly as iron heads get. A competent fitter can move loft and lie a couple of degrees in either direction without stressing the hosel, which also makes these a reasonable base for a custom spec build.
MacGregor Golf VIP 1025 アイアンは高ハンディキャップのゴルファーに向いていますか?
いいえ。MacGregor Golf VIP 1025はボールをしっかり打てるゴルファー向けのプレーヤーズキャビティ設計です。このカテゴリーは一般にハンディキャップ0~12のゴルファーに合います。高ハンディキャップのゴルファーには、ゲームインプルーブメントモデルのほうがやさしく感じられます。
MacGregor Golf VIP 1025の代わりになるモデル
ほかのブランドのプレーヤーズキャビティ アイアンのうち、発売年が近いモデルです。