本文へスキップ

Honma

Honma TW777 PCB Max アイアン

プレーヤーズキャビティ2026$1125

Honma has been forging irons in Sakata since the 1950s, and the TW777 PCB Max is the 2026 version of the company's pocket cavity back for players who want that build quality with a wider margin for error. PCB is the platform. Max tells you where this head sits inside it: a larger footprint and a deeper pocket than the tour-issue cavity irons in the same family.

The category matters here. A players cavity is a compromise club by design, and this one leans toward the help side of that compromise without turning into a game improvement iron. You get a blade length and topline that a mid handicapper can look down at with confidence, but the shape still gets thinner and more compact through the short irons the way a good set should. It is not a super game improvement club wearing a nicer badge.

What you are paying for with Honma, beyond the head design, is finish work. The company grinds and polishes its own heads, builds its own Vizard shafts in-house, and prices accordingly. If you have never held a TW iron, the surface quality is a genuine step above what most of the market ships. Whether that is worth the premium over a comparable Japanese forged cavity from Mizuno or Srixon comes down to how much you value the object itself.

要点

Honma TW777 PCB Max (2026年) はサイズをあまり大きくせずにやさしさを加えたプレーヤーズキャビティアイアンです。セット構成は5番アイアン~SWで、7番アイアンのロフトは28°です。2026年発売。希望小売価格 (MSRP) は$1,125です。

Honma TW777 PCB Max アイアン: 主要スペック

カテゴリ
プレーヤーズキャビティ
目安ハンディキャップ
0~12
セット構成
5番アイアン~SW
7番アイアンのロフト
28度
ロフト範囲
22~56度
モデル年式
2026
MSRP
$1125

購入先

各ショップの検索ページを開きます。価格と在庫は各ショップのものです。

今買うべきか、待つべきか?

待つのも一案

発売されたばかり

今年の主力モデルであるTW777 PCB Maxは、発売直後はほぼ定価 (MSRP) のままで、価格はあまり動きません。最新モデルを今すぐ使いたいなら買いです。お得さを重視するなら、発売から6~9か月ほどで値下がりするのが一般的です。

発売時期とこのシリーズの一般的なモデルチェンジ周期に基づく判断で、リアルタイムの価格見積もりではありません。

売却・下取りに出す

見積もり

発売時価格 $1,125 と当年モデルであることから算出.

中古市場価格

$765 - $1,010

個人売買、並品~極上品

下取り価格

$460 - $705

ショップの一般的な買取価格

正確な見積もりを取得

減価モデルによる概算であり、実際の査定額ではありません。実際の金額は状態・シャフト・需要により変動しますので、上記サイトで「Honma TW777 PCB Max」を検索してご確認ください。

ロフトスペック

Honma TW777 PCB Maxの7番アイアンのロフトは28度です。セット構成は5番アイアン~SWです。ハンディキャップ0~12のゴルファーに合います。

Honma TW777 PCB Max (2026年) ロフト表
クラブロフト
5i22°
6i25°
7i28°
8i32°
9i36°
PW41°
AW46°
SW56°

データの範囲は5i~SW (8本) です。Honmaがこのセットに追加のクラブ (例: 4番アイアン) を用意していても、まだデータには入っていません。

TW777 PCB Max クラブ別ロフト

  • Honma TW777 PCB Max 5番アイアンのロフト: 22度
  • Honma TW777 PCB Max 6番アイアンのロフト: 25度
  • Honma TW777 PCB Max 7番アイアンのロフト: 28度
  • Honma TW777 PCB Max 8番アイアンのロフト: 32度
  • Honma TW777 PCB Max 9番アイアンのロフト: 36度
  • Honma TW777 PCB Max ピッチングウェッジのロフト: 41度
  • Honma TW777 PCB Max ギャップウェッジのロフト: 46度
  • Honma TW777 PCB Max サンドウェッジのロフト: 56度

純正スチールシャフト装着時。ロフトは目安で、製造公差により異なる場合があります。

メーカーのスペックページで確認したロフト (2026年11月15日)

Honmaのアイアンロフト一覧Honmaの7番アイアンのロフト (年別)

Honma TW777 PCB Max: 予想キャリー距離

ヘッドスピード別の一般的なキャリーを、このセットの実際のロフトに合わせて補正しています。実際の距離は打点、シャフト、コンディションによって変わります。

クラブロフトゆっくりめのスイング7番アイアン 約144y平均的なスイング7番アイアン 約159y速めのスイング7番アイアン 約173y
5番アイアン22°163 y180 y196 y
6番アイアン25°154 y170 y185 y
7番アイアン28°144 y159 y173 y
8番アイアン32°134 y148 y161 y
9番アイアン36°123 y136 y148 y
PW41°113 y125 y136 y

キャリー距離はTrackManベースの基準値を各クラブのロフトに合わせて算出した推定値で、このモデルで実測した値ではありません。

Honma TW777 PCB Maxについて

The pocket cavity construction is the whole story. Removing mass from behind and below the face lets Honma relocate that weight to the perimeter and into the sole, which raises MOI and drops the center of gravity. Practical result: off-center strikes lose less ball speed, and the long irons launch higher than a thinner cavity would allow. The Max designation extends this further than the standard PCB head, with a longer blade and more heel-to-toe weighting. Honma forges its TW heads rather than casting them, which is the reason the feel stays soft even with a fast, thin face. Forged carbon steel damps vibration differently than cast stainless, and you notice it most on strikes low in the face where a cast head goes harsh. Expect progressive sole width through the set, wider in the long irons for turf interaction and narrower in the scoring clubs for control.

ロフト分析

Honma TW777 PCB Maxの7番アイアンのロフトは28°で、やや強めで、従来のロフトより少し立っています。スイングスピード85~95mphのゴルファーなら、7番アイアンのキャリーは約157~167ヤードと見込まれます。5番アイアン(22°)と7番アイアンのロフト差は6°で、間隔は適切です。ミドルアイアンの距離差がきれいに分かれます。ピッチングウェッジのロフトは41°で、比較的強めなので、サンドウェッジまでの距離をつなぐには46~48°のギャップウェッジを検討してください。

Honma TW777 PCB Maxはどんな人に向いている?

  • ✓Mid handicaps in the 8 to 18 range who want a forged iron that still helps on thin and toe strikes.
  • ✓Anyone coming out of a game improvement set who wants a cleaner shape but is not ready for a true players iron.
  • ✓Players who care about finish quality and are willing to pay a premium for Japanese forging and hand grinding.
  • ✓Golfers who struggle to get long irons airborne and need the low CG a pocket cavity provides.
  • ✓Better players who want a softer feeling cavity in the 4 through 6 irons to blend with blades or a compact cavity in the scoring clubs.

関連記事

よくある質問

What does PCB stand for on the Honma TW777?

Pocket cavity back. It refers to the hollowed channel behind the lower portion of the face, which lets Honma push weight to the perimeter and low in the head. The Max version takes that concept further than the standard PCB head with a larger profile and more forgiveness.

How does the TW777 PCB Max compare to the standard TW777 cavity iron?

Bigger head, more offset, and a lower center of gravity. The standard cavity is aimed at low handicap and tour players who want workability and a compact look. The Max trades some of that shot shaping control for a wider sweet spot and easier launch, which is the right trade for most golfers who are not carrying a single digit index.

Is the TW777 PCB Max forged?

Yes. Honma forges its Tour World iron heads at its own facility in Sakata, Japan, which is a big part of why the line feels the way it does. Forged carbon steel gives you a softer, more muted impact sensation than a cast head, especially on strikes away from center.

Why are Honma irons more expensive than comparable clubs from other brands?

Honma runs its own forging, grinding, polishing, and shaft manufacturing rather than outsourcing, and the finish work on TW heads takes more hands and more time than a mass produced set. You are also paying for a smaller production run. Performance per dollar, other Japanese forged cavities get close. Build quality per dollar is where Honma earns it.

Should I get the stock Vizard shaft or an aftermarket option?

Start with Vizard and only change if a fitting says otherwise. Honma designs those shafts around its own heads, and the graphite iron options in particular are well regarded for players who want lighter weight without losing stability. If you already know your numbers with a specific steel shaft, ordering it as a custom build is usually straightforward through a Honma dealer.

Honma TW777 PCB Max アイアンは高ハンディキャップのゴルファーに向いていますか?

いいえ。Honma TW777 PCB Maxはボールをしっかり打てるゴルファー向けのプレーヤーズキャビティ設計です。このカテゴリーは一般にハンディキャップ0~12のゴルファーに合います。高ハンディキャップのゴルファーには、ゲームインプルーブメントモデルのほうがやさしく感じられます。

Honma TW777 PCB Maxの代わりになるモデル

ほかのブランドのプレーヤーズキャビティ アイアンのうち、発売年が近いモデルです。

TW777 PCB Maxと比較する

Honmaのアイアンをもっと見る

このアイアンが自分のゲームに合うか確かめる

おすすめツールの基準セットとして使うか、ほかのセットと並べて比較できます。